MG used machine for sale

Three-roller calender brand MG 3000 x 200 mm. Year 2006

Key data: 200 mm, 300 mm, 200 mm

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

4 ROLL HYDRAULIC MODEL 2500 X 35 MM MG BRAND MODELM2535 YEAR 2008 plate bending machine top roll 400 mm max plate width 2550 mm capacity thickness 35 mm prebend thickness 30 mm Technical data rolls hardened very high resistance conical plate bending attachment Console electric on wheels with centralized commands Digital position readout, NC controller programmable Opening front side hydraulic drop-end Rerolling system for welded shells rounding. Variable speed working fast/slow. Voltage 380/50 safety and emergency devices manuals along with the machine original

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

4 roll plate bending machine 3100 x 28 mm brand new year 2023 ready. MG model M3028 Capacity plate 3000 mm bending thickness 28 mm prebend 22 mm dual pre-pinch technical data: -length of rolls 3100 mm -top roll dia. 380mm -lower roll dia. 360mm - Power electric 20Hp weight 17ton Configuration fully hydraulic -Hardened surface of the 4 rolls , smooth finishing suitable for stainless steel plates rolling -Digital position readout with memory set -Conical bending plates , contrast pad hardened , rollers angle tiltable -Driven rolls hydraulic plate dragging with axial gear unit each powered rolls. -Opening front hydraulic to unload closed shells. -Rerolling system for welded plates calibration precise rounding. -Control console electric commands with digital readout -Safety installation and emergency stop according to regulation

4 ROLL HYDRAULIC MODEL 1000 x 22mm CNC EVO GRAPHIC 4AXIS PROG PLATE BENDING ROLL PLANETARY DOUBLE PRE-PINCH PLATE PRE-BENDING capacity: -Width of plate: 1000 mm -Thickness of plate rolling 22 mm -Thickness of plate pre-bending 16 mm minimum bending diameter ID 280 mm depending on the plate thickness vs. yield strength Rolls -Surface length mm. 1050 -top roll mm. 250 -lower roll mm. 260 -Power electric 15Hp on centralized hydraulic unit , voltage 3ph Vac 400/50 Configuration installed • Hardening of the 4 rolls , very high resistance against wear. • Central rolls both driven powered with axial gearbox and direct drive hydraulic motor. • Calibration system for the re-rolling of welded shells rounding unwanted flat spots. • Console electric on wheels with centralized commands joysticks CNC position r ...

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible.

Calender 3 rolls MG 3 200 W like new. Purchased in 2009 and used for a limited number of orders, therefore very few hours of actual work (about 50). installed power Hp 440 Upper roller diameter 1.100 mm Side rollers diameter 960 mm Further technical data in the photos.

hydraulic cylinder 2011 brand MG four mod rollers with control panel. MH-345 G 3100 mm long, 45 mm curved veneer and 35 mm thick pre-curved, steel with a yield strength of 260 N / mm2, equipped with hardened rollers, control panel with 2 displays, dimension attached to the machine and hydraulic curved device conical. Bending length: 3100 mm Bending capacity: 45mm Pre-bending capacity: 35mm Top roller diameter: 480mm Bottom roller diameter: 440mm Side roller diameter: 370 mm Power: 40 HP Approximate weight: 29,000 kg. Overall length: 6140 mm Width: 2695 mm Height: 2450 mm Working height: 1860 mm The maximum capacities refer to the ferrule diameter equal to or greater than 3 times the diameter of the top roll to yield materials in the range = 260 N / mm.

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending: 4,0 mm diameter of upper rolls: 160 mm diameter of lower rolls: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 3,5 x 1,5 x 1,3 m New price ~ 45.000 euros from a maintenance workshop rarely used () Furnishing: - hydraulic 4-roller bending machine - with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive ...

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending: 4,0 mm diameter of upper rolls: 160 mm diameter of lower rolls: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 3.000 kg dimensions of the machine ca.: 3500 x 1500 x 1300 mm New price ~ 48.000 euros from a repair workshop - good condition (!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direc ...

Three-roll bending machine make MG type MG 108 AMachine -No: 01226 built in 2002Technical specifications:max. bending length: 1050 mmSheet thickness max.: 12 mmSheet thickness max.: 8 mm for NiRoTop roller diameter: 140 mmBottom roll diameter: 140 mmMin drm. 230mm at :5mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet thickness: 10,00 mm Bending length: 3100 mm Number of rolls: 4   Make MG 10 mm Type MH 308 B Year 2006 4 roll hydraulic plate bender mg blechrundbiege Sheet thickness (mm)T = 10 mm Bending length (mm)L = 3.100 mm Number of rolls 4 roll Pre bend = 6 mm Top rol = 230 mm Lower rol = 220 incl. Hydr. side support incl. CNC Control  

Sheet thickness: 2,00 mm Bending length: 1050 mm Number of rolls: 2   SPECIFICATIONS Controll   MG CNC   Hydraulic / Mechanical  Hyrdaulic 3 or 4 roll  2 Urethan Maximum sheet thickness  2 mm Bending length  1050 mm Top Roll Ø  100 mm Bottom Roll Ø  300 mm Power  5.5 kW  

Sheet thickness: 10,00 mm Bending length: 2050 mm Number of rolls: 4   Make MG 10 mm Type MH 2010 B Year 2009 4 walzen rundbiege plate roll blechrundbiege mg Sheet thickness (mm) T = 10 mm Bending length (mm) L = 2.050 Number of rolls Pre = 6 mm Top roll = 210 2 rolls driven Digital read out Hardened rolls 55 Hrc Fully hydraulic CE Saftety  

Sheet thickness: 6,00 mm Bending length: 1250 mm Number of rolls: 6   CNC Brand: _Unknown / Other CNC Model: MG Touch Command MG - MH 1206 Hydraulic 4 roll plate bender 1250 x 6 mm MACH - ID 6418 Make: MG Type: MH 1206 Control: MG TOUCH COMMAND YOP: 2000 CNC Graphical control Touch screen side roll left side roll right rotation top roll drop end ejector Rolling width:                 1.250mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending:  3mm Top Roll Ø:                    120mm Bottom Roll Ø:                 115mm Side roll Ø:                   105mm Number of rolls:            &nb ...

Key data: 2 _Unknown / Other, 1000 Touch, 2

Sheet thickness: 2,00 mm Bending length: 1000 mm Number of rolls: 2   CNC Brand: _Unknown / Other CNC Model: Touch Rolling width:                 1.000mm Rolling thickness 3x toproll Ø:2mm Top Roll Ø:                    100mm Bottom Roll Ø:                 250mm Number of rolls:               2 Rolling speed:                 0 - 5 m/min Power:                         5.5kW Length:                        2.400 mm  Width:                         1.300 mm  He ...