We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: MAHO)
used
Key data: 1000 mm, 560 mm, 800 mm
Inv. Num. : 3714 Type: MH 1000 C Producer: MAHO Created: 1991 Parameters: Control system: Philips CNC 432 Hours: 62345 h Work table length: 1150 mm Work table width: 800 mm Tool magazine: 24 pieces Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 3400 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 800 mm Cone: ISO 50 Maximum tool weight: 800 kg Machine weight: 7.3 t Equipment: 3 tool holders
used
Universal Tool Milling Machine Make: MAHO Model: MH 1000 2x available! x-travel 1000 mm Tool holder SK 40 Digital. Head swivel +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated The machine is open to the public. Ready for immediate use Free loading, transport no problem. Financing possible at favourable conditions! If you have any questions, just write or call.
used
Universal Tool Milling Machine Make: MAHO Model: MH 1000 Technically flawless Accessories: - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated - Coolant device -Operating instructions The machine is open to the public. Ready for immediate use Delivery possible throughout Europe
used
Universal Tool Milling Machine Make: MAHO Model: MH 1000 2x available! x-travel 1000 mm Tool holder SK 40 Digital. Head swivel +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated The machine is open to the public. Ready for immediate use Free loading, transport no problem. Financing possible at favourable conditions! If you have any questions, just write or call. Technical specifications are non-binding. Errors excepted.
used
Key data: 900 mm, 500 mm
Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamp, control bult, control parts, drive motor, spindles, ... please inquire
used
Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button
used
Key data: 600 mm, 400 mm, 400 mm
Specifications: Philips Control CNC 432 Working area X 600 mm Working range Y 400 mm Working range Z 400 mm Angle table 1000 x 400 mm Tool holder SK40 Quill stroke 80 mm Speed range 80 - 4000 rpm. Feed range X,Y,Z 1 - 2000 mm/min. Rapid traverse X/Y/Z 4/3/5 m/min. Rapid traverse Y 3 m/min Rapid traverse Z 5 m/min Resolution 0.001 mm Weight approx. 2.3tt Good technical condition. An electrified tour is possible.
used
Specifications: Tool holder: SK 40 Travel X/Y/Z: 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Spindle stroke: 100 mm Feeds X/Y/Z: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Table size: 800 x 360 mm Motor power: 8 kVA Dimensions (WxDxH), approx.: 1370 x 1900 x 1860 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Chip pan - Coolant device - Emergency stop push button
used
Specifications: Tool holder: SK 40 Travel (X/Y/Z): 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Feeds (X/Y/Z): 0.2 - 2.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Motor power: 8 kVA Dimensions (WxDxH), approx.: 1400 x 2000 x 1850 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Hydr. Clamping device - Chip pan - Emergency stop push button
used
Specifications: longitudinal X-axis: 500 mm Vertical Y-axis: 350 mm transverse Z-axis: 380 mm Speed range: 63 - 3700 1/min Gears: 2 Tool holder: SK 40 Quill stroke vertical: 50 mm Feed in X, Y, Z axis: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 - 1.9 mm/rev Equipment: -Digital - Rigid table - Large Chip Tray - Machine lamp - Coolant device
used
CNC universal tool milling machine MAHO MH 500 W 4 With path control Philips CNC 432 Year of construction: 1990 Travel: X 500 Y 380 Z 350 Speed range: 20 – 5000 rpm infinitely variable With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Splash protection booth Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION
used
Specifications: Adjustment of the cross support In the horizon. Longitudinal axis (X-axis): 700 mm in the vertical axis (Y-axis): 450 mm Adjustment of the headstock In the horizon. Transverse axis (Z-axis): 500 mm Tool holder: SK 40 Quill stroke: 100 mm Speeds: 20 - 3150 1/min Feeds in the axes X,Y,Z: 1 - 3000 mm/min Feed force in the axes X,Z: 8000 N Feed force in the Y axis: 24000 N Rapid traverse in the X,Y axes: 6 m/min Rapid traverse in axis Z: 11.4 m/min Connection: 400 V Motor power: 40 kVA Space requirement (LxWxH), approx.: 3250 x 3600 x 2200 mm
used
Maho, 700C Control : Maho 432, Built in 1989, Adapter SK40, Tool changer Method : X-700, Y-450, Z-500, Quole The machine can no longer be viewed under power. Has lost parameters ! Would also sell spare parts, table, milling head, drives, control, ...
used
Maho, 700C Control : Maho 432, Built in 1989, Adapter SK40, Tool changer Method : X-700, Y-450, Z-500, Quole The machine can no longer be viewed under power. Has lost parameters ! Would also sell spare parts, table, milling head, drives, control, ...
used
Maho MH 500 W3 - CNC tool milling machine - Maho CNC 332 CNC control - new LCD display - incl. instruction manual & documents - Built in 1989 Specification Workspace: - X-axis: 500 mm - Y-axis: 380 mm - Z-axis: 350 mm Workroom: - Clamping surface: 254 x 354 mm - Number of guide grooves: 1 Working spindle: - Tool holder: ISO40 - Quill stroke: 50 mm Speeds & Feeds: - Working spindle speeds infinitely variable: 20 - 5000 rpm - Feed range X, Y & Z axes: 1 - 2000 mm/min Rapid traverse: - X & Z axes: 4 m/min - Y-axis: 2 m/min Electrical equipment: - Voltage: 400 V - Total connected load: 19 kVA CNC Control: - Resolution of linear displacement measuring systems: 0.001 mm - Readings: Screen - Number of axes controlled at the same time: 2 - Number of sequentially controlled axes: 3 Weight & Space Requirements: - Dimensions WxHxD: 2235 x 1943 x 2375 mm - Weigh ...
used
Key data: 500 mm, 400 mm, 300 mm
I sell a used Maho MH 500 C. 4 axis milling machine with control C 432. Year of construction approx. 1984. Condition: good use in college - little run Table Ø 400 mm Hand panel Control screen new cpl. Documentation available
used
CNC Milling Machine MAHO MH 1200W Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm CNC: PHILIPS CNC 532 Year of construction: 1993 Working hours: 34 000 hours Horizontal + vertical spindle Cone ISO 40 Spindle speed: from 20 to 4000 RPM Table size: Ø 1000 mm x 800 mm Rotative table AXE B - 360 000 points Max weight on table: 1000 kg Vertical sleeve travel: 80 mm Swivel head Programmable feeds X/Y/Z - 1 to 3000 mm/min Rapid movement X/Y/Z - 8 meter/min. Central lubrication Lubricant tank Voltage:: 380 V Dimensions (L x W x H): 3200 x 3200 x 2400 mm Weight: approx 9 T
used
Maho DMU 70 VL / 5 axles, Built in 2003, Control Mill Plus / Shop MIll, Travel X/Y/Z 2 x 710/ 520/520 mm, Right table rigid 1000 , 600 mm, left table NC swivel - rotary table 700 x 500 mm, Ww 2 x 32 speed, infrared touch probe, 2 chip conveyors, IKZ 40 bar, Spindle speed up to 12,000 rpm, SK 40, long processing possible,
used
CNC Machining Center Manufacturer: Maho Type: MH 600 E2 Year of construction: 1991 / 2015 Retrofit in 2015 CNC control: Heidenhain TN0C6 /322000 9 Version 03/2013 Travel: X/Y/Z = 600 x 400 x 450 mm Spindle: 4,000 rpm Tool holder: ISO40 Tool changer: 20 times Electronic handwheel Rotary table: Ø 500 mm Weight: approx. 3,000 kg
used
x-travel: 400 mm y-travel: 210 mm z-travel: 300 mm Table size: 600x390 mm Spindle mount ISO: 40 Spindle speeds: 40-2000 rpm 3 axes feed rate 10-500 mm/min Rapid traverse 1.25m/min Quill stroke 60mm Universal table 600'390mm T grooves 16mm H7 5pcs Transverse adjustment manual165mm Swivel around the horizontal longitudinal axis +/-30° Swivel around the horizontal transverse axis +/-30° Can be rotated around the vertical axis 360° Various tool holders and collets Documentation Weight of machine approx.: 1.5 t Dimensions approx.: 1.3x2x1.7 m high Digital display Fagor 3 axes Forklift for on-site loading
used
CNC Universal Milling Machine Make: Maho Type: 900 C Year of construction: 1981 (overhauled 2005) Control: 432 -Philips Travel: x-1000 mm y-550 mm z-650 mm Table size: 1250 x 700 mm Recording: ISO 40 Speeds: 40 – 2000 rpm Feeds x,y,z: 1 - 2000 mm/min Rapid traverse x,y,z: 6 m/min Weight: approx. 5500 kg
used
X-axis: 300 mm Y-axis: 200 mm Z-axis: 350 mm Table dimensions: 520 x 260 mm Tilt and rotatable Spindle Holder: ISO40 Spindle speeds: 40 - 2000 rpm. Spindle stroke: 50 mm Feed: 5 - 500 mm/min. Infinitely variable with rapid traverse Equipped with: -Vice -Turntable - ISO milling tools - Cabinet with accessories - Original operating instructions Country of origin: Germany Machine LxWxH: 1200 x 1300 x 1500 mm Machine weight: 1000 kg
used
Control Heidenhain TNC 234 Power consumption 20 kVA Travel 600 x 400 x 400 mm Tool holder ISO40 Pinole stroke 80 mm Spindle speeds 24 - 4500 rpm Feeds 1 - 4000 mm/min Rapid traverse X-Y/Z 6/4 m/min The machine is in very good condition,
used
CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn
used
Control Heidenhain CNC 234, Workspace: X 700 mm, Y 450 mm, Z 450 mm, Tool holder ISO 40, Pinole stroke vertical 80 mm Working spindle 2o - 4000 rpm. Power consumption 11 kVA, Weight approx. 3,600 kg, Dimensions: L 2490 x W 1780 x H 2010 mm Accessories: approx. 20 various tool holders, Machine can be viewed under power.
used
MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
used
Maho MH 600 Universal Milling Machine Specification Manufacturer Maho Type MH600 Year. Unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm Main spindle speed 20 - 4000 rpm Tool holder ISO-40 Extras Vertical head with pinole Various tool holders Universal table Digital display 2-axis Machine documentation Coolant set.
used
1 set, 3 Sück servomotors for the spindle speeds. Weight: approx. 6 kg. Shipping with DHL possible by arrangement. The motors are from an NC tool milling machine, Fabikat: MAHO, Type: MH 600 P and have 100% until expansion. functioned. The parts can be viewed in consultation and are immediately available.
used
Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
used
Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition