KRAMER used machine for sale

We offer you a Kramer KT276 from a current recycling. Year of construction 2019 Condition: used Original price: n.a. Asset Manager: Klaudius Giolbas Phone: 0172 2796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 31633 Leese The sale is without warranty Subject to prior sale

Kramer Type A Swivel Bending Machine Toll III 2500 Effective length 2500mm Maximum sheet thickness 2.5mm

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

Offer 23465 Specifications: - Max. working width 1040 mm - max. material thickness (with a strength of 40 kg) 3.5 mm - Table width 300 mm - Stand projection 100 mm - Working height 880 mm - Front angle stop - 3 additional front support arms - Back gauge adjustable by hand 5 - 550 mm - Drive 400 V / 5.5 kW - E.- Footswitch - Space requirements including back gauge, without front support arms -ca. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Specifications: Sheet thickness max.: 2.5 mm Cutting length: 2520 mm Weight, approx.: 2200 kg Dimensions (LxDxH), approx.: 3660 x 800 x 1690 mm 3 honeysuckle segments with the following measurements: - Depth 40 mm - Height 145 mm - Length: 540 / 785 / 1140 mm

Offer 23231 Specifications: - max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 5.5 mm - Bending angle adjustment electronically preselectable 0 - 180° - highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - of the bending beam 30 mm - the lower beam 90 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3000 x H 1650 x D 1200 mm - Weight approx. 5500 kg - E. foot switch

bending length: 2000 mm sheet thickness: 1.5 mm steel

sheet thickness: 1.25 mm steel Roller center spacing: 56 mm Maximum working depth: 220 mm Clockwise and counterclockwise rotation via foot switch

Guillotine shears Manufacturer Kramer Type TM II a 4000 Year of construction 1988 2.5 mmm sheet thickness. Machine is in a used very good condition. With invoice and VAT.

Swing bending machine Manufacturer Kramer Type V 4000 bending length 4000mm sheet thickness 3.0 mm 100% functional, very good condition

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm

There are two identical bending machines available, working width: 2000mm.

Description: Useful length: 1000 mm Max. sheet thickness: 1 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,300 mm

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2022, fuel: diesel, KW: 34.3, total weight (kg): 4,500, read operating hours (h): 210, vehicle identification no.: 349040715, 1 grab bucket KRAMER 10000275259, serial number: IXS10_26_22_003, width: approx. 165 cm, weight: 464 kg, 1 pallet fork WACKER NEUSON, Damage: all around Traces of use

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2020, fuel: diesel, total weight (kg): 4,500, reading operating hours (h): 862, vehicle identification no.: 349011833, 1 grab bucket KRAMER 10000275259, serial number: 071433 0320 0804, year of manufacture: 2020, width: approx. 165 cm, weight: 440 kg, 1 pallet fork WACKER NEUSON , Damage: all around Signs of use

sheet width: 3050 mm plate thickness: 2,5 mm arm length: 100 mm table width: 300 mm total power requirement: 7,5 kW machine weight ab.: 2500 kg dimensions: 3800 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Working width max. 1000 mm, on castors weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 900 x 1,300 mm

tablet Deduster CIP Manufacturer Kramer Model E3100C-750 year 2006

Deduster Manufacturer Kramer Model KD6010 year 2016 machine is in good condition

sheet width: 1050 mm plate thickness: 1.50 mm pre-bending: 1.25 mm diameter of upper rolls: 65.0 mm diameter of lower rolls: 65.0 mm side roll diameter: 65.0 mm speed: ca. 6,0 m/min voltage: 400 V total power requirement: 0.8 kW weight of the machine ca.: 455 kg range L-W-H: 1500 x 700 x 1230 mm Furnishing: - electro-mechanical three-roll round bending machine - robust electric drive STROMAG BZFM 63 drive motor - asymmetrical roller arrangement - manual delivery of the side roller - manual delivery of the bottom roller - swing-out top roller - freely movable double foot switch Right/left rotation of the rollers - side control cabinet Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401269 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing bending machine KRAMER type A toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Usable length 1060 mm sheet thickness 3.75 mm Stroke of the upper cheek 180 mm Adjustability of the bending cheek 60 mm Backgauge 480 mm Drive power Bending cheek drive 4 kW Drive power Upper cheek drive 1.5 kW Mains connection 400 Volt, 50 Hz - manual and semi-automatic control - Angle adjustment via angle dial - one-piece pointed rail 135 - Backgauge with hand crank adjustment and simple dimension scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used

Beading machine KRAMER type SBMM 56 Fabr. No. 20417 Year of construction approx. 1980 Material thickness 1.25 mm Roller center distance 58 mm Roller diameter 60 mm Shaft journal 24 mm Shaft diameter 39 mm Outreach 130 mm Motor power 0.75 kW Mains connection 400 Volt, 50 Hz - electric foot switch for clockwise and counterclockwise rotation - adjustable stop with wear plate - various rollers Space requirement L x W x H 700 x 350 x 1200 mm Weight 170 kg good condition; used

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Manual three-roll bending machine make KRAMER type RV 65/1000Year of construction 1992Technical specifications:Useful length: 1040 mmlargest sheet thickness: 1.5 mmRoller diameter: 65mmWeight: 240kgExternal dimensions: 1300 x 600 x 1200 mmwith- swing-out upper beam- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIYear of construction 1985Effective length: 1020 mmMax. Sheet thickness: 3 mmMax. Opening width of the upper beam: 290 mmMax. Adjustment speed of the lower and bending beam: 90 mmMotor power bending beam: 2.2 kWEngine power upper beam: 1.5 hpDimensions L x W x H: 1600 x 700 x 1500 mmWeight approx: 1300 kgWith:- backgauge- Footswitch- separate control panel- one-sided bending cheek driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjustment- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted ...