HUVEMA used machine for sale

Key data: 25 mm, 225 mm, 150 mm

Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg

Mounted on trestle

Mounted on trestle.

The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.

On and including pedestal

On and including pedestal

Description: Drilling capacity 16mm Drilling stroke 90mm Recording MK2 Projection 175mm Speed 200 - 1500rpm Connection voltage 400 volts Table can be swiveled and swiveled Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 90 kg

Description: Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light Drilling capacity in steel 25 mm Drilling stroke 150 mm Spindle mount ISO 40 Spindle speeds vertical 115 - 1750 mm Table adjustment transversely 600 mm Table adjustment lengthwise 350 mm Table adjustment vertical 350 mm Table clamping surface 800 x 240 mm Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.7 t Space requirement approx. 1.6 x 1.4 x 2.1 Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 2,100 mm, weight approx.: 700 kg

Description: Table dimensions: approx. 315 x 245 mm With swivel table 2 speed settings: 750/1500 rpm With left and right rotary switch Stroke: 0 - 130 mm weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,820 mm

boring stroke: 120 mm, boring diameter: 32 mm, table surface area l x w : 380x380 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

Description: motor power 0.37 kW voltage 230V drilling capacity 16 mm pinole stroke 85 mm spindle MK2 spindle speed 340 - 2880 rpm (12) drilling table Ø 300 mm column diameter Ø 75 mm including Röhm quick-clamping drill chuck 3-16 mm drill clamp 110 mm Approx. Onsite Dimension. (l x w x h): 340 x 570 x 1,020 mm, weight approx.: 71 kg

cutting diameter: 178 mm saw band length: 2265 mm cutting width: 225 mm dimensions of saw-band: 2265 x 20 x 0,9 mm band speed: 30 / 60 m/min capacity 90 degrees: round: 178 mm capacity 90 degrees: flat: 225 x 110 mm capacity 45 degrees: round: 140 mm capacity 60 degrees: round: 85 mm total connected load: 0,75 kW weight of the machine ca.: 165 kg dimensions of the machine ca.: 1100 x 700 x 1650 mm semi-automatic band saw Furnishing: - Micro dosing system - 3000 mm feed roller conveyor - Coolant gun for cleaning the machine - Miter cut from 45° right - 60° left - automatic vice clamping + vice opening - automatic saw cut + automatic raising saw bracket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm bore stroke: 150 mm spindle taper: ISO 40 : 115 - 1750 mm : mm : 600 mm : 350 mm : 350 mm table surface area: 800 x 240 mm max. distance between table and spindle-nose: mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,6 x 1,4 x 2,1 m Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 1,0 x 2,5 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 356 mm turning diameter over slide rest: 220 mm turning dia. in gap: 506 mm length: 0 mm number of spindle speeds: 30 - 3000 U/min. spindle bore: 38,0 mm tailstock quill taper MT: MK 3 quill stroke: 115 mm bed width: 206 mm adjustment: Plan 180 mm spindle taper: DIN 55029, D1-4 total power requirement: 4,0 kW weight of the machine ca.: 1500 kg range L-W-H: 1850 x 1000 x 1300 mm New price ~ 13,500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - NEWALL B60 digital display, front left - 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder with 3x inserts - folding steel holder protection - Infinitely variable speed adjustm ...

bore capacity in steel (diameter): 40 mm arm length: 350 - 1250 mm workpiece height max.: 1250 mm spindle taper MT: 4 spindle turning speed range: 25 - 2000 U/min threading:: 27 mm quill stroke: 315 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 900 mm table-size: 625 x 500 mm column diameter: 350 mm total power requirement: 3,0 kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: 2,15 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performance, the machines are used for drilling, reaming and tapping. The drills frame is made from a high-quality fine-grain cast iron with heavy ribbing to ensure maximum reduction of vibrations. Precision ground gears ensure that the machine runs quietly, and the practical layout of the electrical and mechanical controls at the headstock make for easy operation. The machines are also fitted w ...

plate length: 1550 mm plate thickness: 2 mm number of rolls: 3 roll diameter: 90 mm min. bending diameter: 100 mm weight of the machine ca.: 560 Kg dimensions of the machine ca.: 2,5 x 1,0 x 1,4 m • motorical driven round roll, • operation by foot switch ( forwards/backwards), • back roller by hand wheel adjustable (can be adjusted to bend conically), • bottom roll adjustable via eccenter lever, • top roll is swiveable in order to take the work piece, • safety wire with emergency stopp function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3960 x 27 x 0,9 mm cutting width: 320 mm cutting capacity - flat: 440 x 220 / 90° mm cutting capacity - round: 320 / 90° mm cutting capacity - square: 320 / 90° mm cutting capacity - flat: 280 x 260 / 45° mm cutting capacity - round: 280 / 45° mm cutting capacity - square: 26 / 45° mm speed: 20 - 100 m/min sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2,0 kW weight of the machine ca.: 750 kg dimensions of the machine ca.: 2100 x 1300 x 850 mm Features: • Inverter for adjustable speed • hydraulic lifting of the saw arm • automatic stop after sawing operation • manual saw blade tension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: 810 mm cutting capacity - flat: 480 x 850 / 45° mm cutting capacity - round: 480 / 45° mm speed: 20 - 100 m/min sawing motor: 4 kW total power requirement: 6 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 3000 x 1200 x 2350 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 42 mm arm length: 280 - 1100 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 44 - 1500 U/min threading:: M 25 mm quill stroke: 230 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 820 mm table-size: 635 x 520 x 415 mm column diameter: 260 mm total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1880 x 864 x 2210 mm Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created wi ...

bore capacity in steel (diameter): 50 mm arm length: 490 - 2000 mm workpiece height max.: 1900 mm spindle taper MT: 5 spindle turning speed range: 35 - 1890 U/min threading:: M 50 mm quill stroke: 370 mm feed range - spindle: 0,07 - 0,96 mm/U slide adjustment -horizontal: 1510 mm table-size: 1000 x 800 x 500 mm column diameter: 432 mm base plate: 2908 x 1102 x 250 mm no. of turning speeds: 12 total power requirement: 5,5 kW weight of the machine ca.: 6600 kg dimensions of the machine ca.: 3105 x 1400 x 2960 mm Radial drilling machine with hydraulic clamping device. With timer IC which makes it possible to release the arm to move up/down and to stop with one button. The spindle can remain in the same position when changing the tool. Accesories: - Gears in oil bath - Protection against suddenly falling arm - Precision ground gears - Integrated cooling system - automatic tool ejector The  ...