HÄUSLER used machine for sale

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.

Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.

Roll roller, plate roller, roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheet thickness: 6mm (stainless steel) - 14mm (Alu) Top roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic pull-back assist Machine weight: 23000kg Videos available for dismantling

Axis diameter: 95 double T-iron on the x-axis: mm U-iron on the x-axis: mm T - beam - web outwards: mm channels - flange: angle steel/side length: mm square bar steel: mm peripheral speed: m/min total power requirement: KW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,6 x 1,5 x ,9 m Profile bending machine with: - 3 driven axles - Box with tools - Emergency stop facility The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: SPECIFICATIONS Character: Haeusler Type: HPR 10 Coker round: 89x5 mm - diameter 600 mm Solid round: 65 mm - diameter 600 mm Solid square: 50x50 mm - diameter 500 mm Solid rectangle difficult side: 90x15x10 mm - diameter 900 mm Corner iron outside: 90x90x11 mm - diameter 900 mm Angle iron inside: 70x70x10 mm - diameter 900 mm T-profile outer edge: 100x100x11 mm - diameter 1,000 mm T-profile inside edge: 70x70x10 mm - diameter 900 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,800 mm

Description: SPECIFICATIONS Character: Haeusler Type: RMA 2,500x30 Year of construction: 1962 Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 30 mm Number of rolls: 3 Upper roller diameter: ø450 mm weight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 7,200 x 2,750 mm

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

Make HAEUSLER Type VRM 1500 x 5 Year of construction 1964 Control conventional Sheet width 1500 mm Sheet thickness 5 mm Prebending 4 Upper roll diameter 185 mm Lower roll diameter 185 mm Side roll diameter 145 mm Dimensions of the machine L x W x H 4.0 x 1.23 x 1.6 m - Conical bending device - pneum. Folding stock

4-shaft sheet metal rolling machine manufactured by Haeusler Switzerland type VRM-HY-L 4000x6. The machine rolls INOX 6 mm, black 8 mm, aluminum 14 mm sheet metal, on a length of 4100 mm, the diameter of the rollers: the upper one 350 mm, the others 250 mm. The machine with the function of bending sheet metal with side rollers up to 6 mm, and with the function of rolling cones. Beveling the side shaft on both sides, bending with the bottom and side shafts to make cones. Hydraulic retraction assist on the right side. Working rotation fast - slow up to 16 rpm. Weight 23000 kg. Power supply 15 kW.

sheet width: 4000 mm plate thickness: 40,00 mm pre-bending: total power requirement: kW weight of the machine ca.: 78 t dimensions of the machine ca.: m Adjustable rollers 3 The rollers are adjusted hydraulically Top roller diameter 710 mm Bottom roller diameter 640 mm Side roller diameter 520 mm Working speed 2+4 m/min (up to 8m/min) Additional equipment Electronic synchronization Air-cooled oil cooler Upper support device Lateral cylinder support device (10t) Infeed table (20t) hydr. Bladder storage Cone bending device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4   Rolling width:                 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  50mm Top Roll Ø:                    630mm Bottom Roll Ø:                 600mm Side roll Ø:                   500mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:    & ...

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  18mm Top Roll Ø:                    430 + 300 mm Bottom Roll Ø:                 430mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:    & ...

Sheet thickness: 150,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id     5563 MAKE          Haeusler TYPE           VRM-HY YOP             1990 / 2000 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø     120 mm Rolling thickness 5x toproll Ø      150 mm Rolling thickness prebending       100 mm Top Roll Ø          910 + 820 + 740 mm Bottom Roll  Ø    940 mm Side roll Ø           780 mm Number of rolls    4 Rolling speed        2 + 4 m/min Adjustiment lower roll        200 mm/min. Adjustment side rolls    &nbs ...

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   MACH-id    1784 MAKE         Haeusler TYPE           VRM HY YOP             2000 SPECIFICATIONS Rolling width       4000 mm Rolling thickness 3  x toproll Ø      60 mm Rolling thickness 5   x toproll Ø     50 mm Rolling thickness prebending       40 mm Top Roll Ø       710 mm Bottom Roll Ø        640 mm Side roll Ø      520 mm Number of rolls          4 Rolling speed      1/4/6/8 m/min Top support         Yes Side supports       Yes Number of driven rolls  ...

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic   3 or 4 roll    4 roller Maximum sheet thickness   60 mm Bending length   3000 mm Max. Rolling capacity Ø 2.500   60 mm Max. Prebending capacity Ø 2.500   45 mm Top Roll Ø  560 mm Bottom Roll Ø  540 mm Side Rolls Ø  400 mm Power   55.5 kW Working speed M/Min. 2 + 4 M/min.  

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id   4022 MAKE        Haeusler Swiss TYPE          VRM - HY YEAR          SPECIFICATIONS      Hydraulic / Mechanical    Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness    30 mm Bending length     3000 mm        Max. Rolling capacity Ø 2.500      25 mm Max. Prebending capacity Ø 2.500      20 mm Top Roll   Ø    420 mm Bottom Roll Ø   400 mm Side Rolls Ø    340 mm

Sheet thickness: 25,00 mm Bending length: 3100 mm Number of rolls: 4   SPECIFICATIES Besturing  SIEMENS PANEL Werking   Hydraulisch / Mechanisch Hydraulic3 of 4 rollenwals  4 roll Plaatdikte  25 mm Wals lengte in mm  3100 mm Max. wals dikte bij product Ø 2.500  20 mm Max. aanbuiging bij product Ø 2.500  10 mm Boven rol diameter   Ø370 mm Onder rol diameter    Ø370 mm Zij rollen diameter Ø260 mm Werk snelheid in M/Min.  0 - 4 M/min. AFMETINGEN Lengte  6950 mm Breedte  2180 mm Hoogte2100 mm