GEMINIS used machine for sale

Key data: 720 mm, 3000 mm

CNC Cycle Lathe, Geminis, CNC 4 Plus 720/3000 Control: Fagor 800T CNC Lace width. : 3000mm, diameter over carriage 470mm, spindle bore: 80mm Speed range: 0- 1600rpm, Accessories: 3-jaw chuck, 4-jaw chuck, face plate, Multifix tool changer with inserts, chip conveyor, 2 steady rests The machine can be viewed under power!

Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws  ...

Manufacturer GEMINIS Model GHT-4 720 x 3000 Year 2004 CNC FAGOR 8055 TC/B Capacities and feeds Max. swing over bed 720 mm. Max. swing over cross slide 470 mm. Height of centres from flat guide 366 mm. Distance between centres 3.000 mm. C Axis and driven tools INCLUDED Fast feedrate X/Z axis 8.000 mm/min Work feedrate X/Z axis 8.000 mm/min Headstock Main spindle bore diameter 92 mm. Main spindle nose DIN-55027-11 Spindle diameter on front bearing 150 mm. Spindle speed 0-1600 Spindle automatic ranges 2 Main spindle power 17 / 20,5 kW Spindle torque 1590 / 1920 Nm Tailstock Ø Tailstock Quill 100 mm Tailstock travel 200 mm Taper Morse 6 Bed Width 430 mm. Height up to flat guide 775 mm. Turret Turret type Sauter VCI50 Ø400 mm. Driven tool position at turret 8 Driven tool power 5.5 kW Additional equipment 3 jaw auto-centering chuck SHW Autoblock 315 BH  ...

For sale: Geminis CNC 5 Plus 870/3000 CNC /cycles turning machine with a Fagor 800 T controller. The turning diameter above the bed is 870 mm, the turning diameter above the cross carriage is 560 mm. The tip distance is 3,000 mm. The machine comes with two bezels. The chuck diameter is 800 mm. A second chuck is mounted on the other side of the spindle box. The spindle passage is 150 mm. The machine is in good condition. Available from stock, subject to prior sale.

Control and feed spindle lathe Manufacturer Geminis Type GE870 Turning diameter 870mm Turning length 4000mm the machine also has a face plate 900mm and a fine bezel. Guides are very good, no wear to see. 400mm Forkardt wedge bar chuck 3 axis digital display Machine was stored about 3 years ago and is no longer used.

Center lathe Geminis GE1000 Distance between centers: 3000 mm Turning diameter: -Over bed: 1000 mm -Over cross slide: 720 mm -In gap: 1240 mm Spindle bore: 104 mm Spindle speed: 13 - 1000 rpm Motor: 18,5 kW Year of manufacturing: 1997

Geminis GE650 lathe. Distance between centers: 1500mm. Swing: 680mm. Swing in carriage: 410mm. Swing in gap: 850mm. Spindle: 82mm. 18 speeds (18-1250rpm) Equipped with chuck and steady rest. Weight: 3980Kgs.

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

Swing over bed: 590mm. Swing over carriage: 340mm. Swing over gap: 820mm. Distance between centers: 1500mm. Spindle: 58mm. Equipped with chuck and steady rest. Equipped with DRO.

turning diameter: 470 mm turning length: 720 mm control: FAGOR 8055 TC/B centre height: 366 mm dist. between centers: 3000 mm c-axis: 0 Drive tool: feed speeds: 8.000 mm/min main spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter in front bearing: 150 mm spindle rate: 0-1600 Spindle power: 17/20,5 max. torque on the spindle: 1590/1920 quill:: 100 mm tail stock: 200 mm taper: Morse 6 : Sauter VCI50 Ø400 mm. bed width: 430 mm total power requirement: 28 kW weight of the machine ca.: 5.700 kg dimensions of the machine ca.: 6.800 x2.385 x1.765 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Geminis GHT 11 G4 2200x8000 Lathe was manufactured in the year 2010. It is equipped with a Fagor 8070 control unit and has 2 axis. The machine has a spindle bore of 162 mm, it includes a steady rest, chip extractor, electronic handwheel, machine leveling supports, and various turret tool holders as additional equipment.

Distance between centers: 6000 mm Height centers: 800 mm Max swing over bed: 1600 mm Max swing over slide: 1225 mm Main spindle hole diam: 150 mm Speed range: 4 Speed ​​range I: 0-90 rpm Speed ​​range II: 0-180 rpm Speed ​​range III: 0-355 rpm Speed ​​range IV: 0-710 rpm Cross slide travel: 830 mm Quill diameter: 320 mm Quill travel: 250 mm Equipped with: Control: Siemens Sinumerik 840 D Shop Turn 4 independent jaw chuck: Ø 1400 mm 4 independent jaw chuck: Ø 560 mm Square Auto Turret: SAUTER 4 pos - Ø 320x320 mm Tailstock and quill: motorized Chip conveyor: Yes 1 steady rest: Ø 100-500 mm 1 steady rest: Ø 500-900 mm

Geminis GE-590 A lathe in good condition. Distance between points 3000mm, 18 speeds and 7.5-10CV main motor. Equipped with 3 universal jaws and 4 independent jaws.

centre height: 500 mm max. turning dia. over cross-slide: 680 mm max. Turning diameter over bed: 1.000 mm centre distance: 9.000 mm control: HEIDENHAIN 4110 Manual + main spindle bore: 104 mm turning speed range: 0 - 1.600 U/min machine weight ab.: 15.100 kg CNC Lathe | GEMINIS - GHT5 G2 - 1000 x 9000 The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 870 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: Fagor CNC Model: Fagor 8055 Work load between centrers 2800 Kg Fixed steady rest 2 x  Coolant system Quick chnage tool post Swing over bed Ø:        870mm Swing over cross slide Ø:560mm Swing in the gap Ø:      910mm DBC Turning Length:      3000mm Gap length:              325mm Spindle bore:            105mm Spindle power:           37kW Bed width:               550mm Tailstock spindle Ø:     140Ø Spindle taper:           5Mk Speeds / ranges:         1400Rpm Length:                &nbs ...

turning diameter: 870 mm turning length: 3000 mm control: Siemens type: 810 mm bed width: 620 mm turning diameter over slide: 560 mm 3 jaw chuck Forckrath: 630 mm type: 3KTN 630 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 430 mm Center distance: 2000 mm Spindle bore: 82 mm MAKE    Geminis Spain TYPE   GE 870 YEAR   80 er SPECIFICATIONS Swing over bed Ø  870 mm ControlConventionel  Swing over cross slide  530 mm Swing in the gap Ø  1100 mm Distance between centres   2000 mm Spindle bore  82 mm Spindle speeds / ranges   12350 Rpm Bed width  550 mm Power  15 Kw DIMENSIONS Length  3500 mm Width  1700 mm Height   1800 mm

Turning diameter: 1200 mm Turning length: 5000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id    3413 MAKE    Geminis TYPE   CNC 1.200 YEAR   90´s SPECIFICATIONS   Swing over bed Ø  1.200 mm Control  NUM 760 Distance between centres   5.000 mm Spindle speeds / ranges   710 Rpm Bed width   1.150 mm Power   55 Kw Geminis CNC lathe  

Turning diameter: 1200 mm Turning length: 5000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MAKE   Geminis Spain TYPE     G3 - 1200 YEAR    90 er SPECIFICATIONS Swing over bed Ø   1200 mm Control     NUM 760 Swing over cross slide   950 mm Distance between centres    5000 mm Work piece weight    25000 kg Spindle bore    104 mm Spindle speeds / ranges    760 Rpm Bed width    1000 mm Power   55 Kw DIMENSIONS Length    11500 mm Width       3700 mm Height      2300 mm

Turning diameter: 620 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: Fagor CNC Model: 8055 MAKE    Geminis TYPE      GHT 4 - 620 YEAR     200 ? SPECIFICATIONS Swing over bed Ø   620 mm Control     FAGOR 8055 Swing over cross slide    370 mm Distance between centres    2000 mm Spindle bore    105 mm Spindle speeds / ranges   1600 Rpm Bed width    430 mm Power    15 Kw DIMENSIONS Length   4600 mm Width     2400 mm Height    2000 mm

Key data: 720 Fagor, 3000 8055

Turning diameter: 720 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: Fagor CNC Model: 8055 Swing over bed Ø:        720mm Swing over cross slide Ø:470mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           17kW Bed width:               430mm Tailstock spindle Ø:     100Ø Stroke pinole:           200mm Spindle taper:           5Mk Workpiece weight:        2.560Kg Speeds / ranges:         1600Rpm Feed rate X-Axis:        8.000mm/min. Feed rate Z-Axis:        8.000mm/min. Length:                &n ...

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.