FREUTEK used machine for sale

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/min Approx. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5, ...

Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5, ...

Description: Each micrometer features two easily interchangeable anvils. This model features a 700-800 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 800 x 1,090 x 105 mm, weight approx.: 17 kg

Description: Each micrometer features two easily interchangeable anvils. This model features a 600-700 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 960 x 680 x 100 mm, weight approx.: 15 kg

Description: Each micrometer features two easily interchangeable anvils. This model features a 500-600 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 605 x 860 x 75 mm, weight approx.: 10 kg

Description: Each micrometer features two easily interchangeable anvils. This model features a 300-400 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 680 x 490 x 70 mm, weight approx.: 6 kg

Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg

Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg

Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg

Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg

Description: 0-600mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 855 x 390 x 295 mm, weight approx.: 11 kg

Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg

Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg

Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg

Description: Series of 32 Johnson parallel-plane gauge steel blocks in wooden case. Hardness HRC64 Complies with ISO 3650 - DIN 861. Gauge blocks are reference measuring instruments for checking other instruments. The package contains 32pcs of different sizes. 5-point calibration, measurement uncertainty of the deviation in the center (0.07 + 0.5 · L) µm. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 135 x 60 mm, weight approx.: 2 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 250-450 mm, Depth: 200mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 160 x 70 mm, weight approx.: 5 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range 250-450 mm, dp 1500 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 920 x 175 x 50 mm, weight approx.: 6 kg

Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg

Description: Stacker height 1680 mm, Capacity 500 kg, Max lifting height 1300 mm, fork length 1250 mm. Certification CE. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,650 x 600 x 1,700 mm, weight approx.: 220 kg

Description: 6 Freutek ISO30-ER32 tool holder cones, balanced, up to 30,000 rpm, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 65 x 150 mm, weight approx.: 5 kg

Description: Tool holder cones BT40-ER32-100, balanced, up to 25,000 rpm, new packaged 5 pcs, lubricated in sealed bag and single pack. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 385 x 200 x 80 mm, weight approx.: 14 kg

Description: Pressure 3000 Kg (100x100 mm), Material: cast iron, Jaw width: 100 mm, Jaw height: 30 mm, Maximum opening: 100 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 150 x 160 mm, weight approx.: 15 kg

Description: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 480 x 200 x 180 mm, weight approx.: 32 kg

Description: Pressure 5000 Kg (150x300 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 300 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 580 x 200 x 195 mm, weight approx.: 36 kg

Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg

Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg

Description: 6' Hydraulic pressure 4500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 640 x 240 x 155 mm, weight approx.: 48 kg

Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg