ELUMATEC used machine for sale

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Key data: 550 mm

Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via E 355 Digital angle indicators on both units for pan and tilt Travelling roller conveyor Material Pad Minimum Quantity Spraying Device Machine is loaded freely

Key data: 4000 mm, 1040 mm, 540 mm

4-axis machining centre with automatic tool change for aluminium, PVC or thin-walled steel profiles Max. travel X-axis: 4000 mm Max. travel Y-axis: 1040 mm Max. Z-axis travel: 540 mm Bmg088bwzyi Infinitely variable A-axis from -120° to +120° Windows control with USB ports Infinitely variable speed up to 24,000 rpm Hand-held control unit Minimum Quantity Spraying Tool changer with 12 shelves Clamp detection and clamp displacement Machine is completely enclosed Barcode Scanner Elusoft Dongle Just under 1,500 spindle hours Weight: approx. 3,500 kg

Key data: 420 mm

elumatec Double Mitre Saw DG104 Year of construction: 1995 Control: E255 Saw blade diameter 420 mm Saw blade bore 30 mm Cutting length 6000 mm Tilt range 45 + 90° Inward swivel range 90 - 22.5° Saw blade speed 2800 rpm. Smallest cutting length 335 mm Power 2 x 4000 W

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

3-axis machining centre with automatic 8-fold tool changer for aluminium, PVC or steel profiles Max. travel X-axis: 6400 mm Max. travel Y-axis: 400 mm Max. Z-axis travel: 380 mm Control E 500 Infinitely variable speed up to 6,000 rpm Profile length measurement at the head Minimum Quantity Spraying 3 angle heads and a high-speed spindle Tensioner detection 8 pneumatic material clamps Weight: approx. 5,000 kg

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Key data: 180 mm, 300 mm, 60 mm

Two-spindle copy milling machine, Elumatec KF 78 / 60 Used & Functional For machining aluminium or steel profiles E.g. window construction With vertical and horizontal milling motor, spraying device and pneumatic clamping device Specifications: Profile height: 60 mm max Milling area horizontal: 180 x 70 mm Milling area vertical: 300 95 mm Stroke: 110 mm Bore speed: 6000 rpm Milling speed: 12000 rpm Air consumption per cycle: 12l Drive power: 740/800w Installation dimensions: (HxWxD) 160 x 280 x 110 Weight approx. 270kg

Year of construction: 2016 Double Miter Saw Manufacturer: ELUMATEC, Type: DG 244-E580/5 E580 Control with automatically swivelling workpiece support, roller conveyor and accessories

Automatic feed via control E 355 P For attachment to any Elumatec single-head saw (right) Max. feed length: 3000 mm With glazing bead caliper

5-axis machining centre with 10-fold tool changer for aluminium or PVC profiles Max. machining length: 12,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Weight: approx. 11,000 kg Minimum Quantity Spraying Tensioner detection and automatic displacement 20 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Conveyor belt Lots of tool holders, including saw blade Loading is included in the price The machine is already dismantled in our warehouse. Function video can be sent. The spindle was overhauled by the manufacturer (cost over 15,000 €)

Year: 2009 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control

Year: 2018 - technically efficient - cutting length: 6000mm - discs: 550 mm - E580 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cut according to the external dimension, without correction - cooling installation - vertical pneumatic clamps - automatically lowered and raised shield shields - sawdust extraction - label printer

PVC welding and plastering line

2 Head PVC Welding Machine

Elumatec Corner Jointing Press For more information, please contact us

Elumatec Cutting Edge & Machining Center For more information, please contact us

elumatec SBZ 122/75 - 5-axis profile machining center High-performance centre for the machining of aluminium, plastic and thin-walled steel profiles with the profile bar at rest to protect the profile surface. - Infinitely variable A-axis from -120° to +120° - Infinitely variable C-axis positionable from -220° to +220° - All five axes can be moved simultaneously via RTCP (Rotation Tool Centerpoint) - Due to the additional C-axis, frontal processing from the left and right is possible - Tapping without compensating chuck - 6 horizontal pneumatic material clamping devices - Linear guides for clamp displacement, autonomous - Collision avoidance due to automatic tensioner detection and positioning - Automatic tool changer with twelve tool storage locations - incl. saw blade 180 mm - Year of construction: 2020 Specification - Max. machining length: 4000 mm - Travel X/ ...

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 6400 mm Max. travel Y-axis: 400 mm Max. Z-axis travel: 380 mm Control E 500 Infinitely variable speed up to 6,000 rpm Hand-held control unit Minimum Quantity Spraying 2 angle heads and a high-speed spindle Tensioner detection and automatic displacement 8 pneumatic material clamps Pendulum operation possible Devices Machine still at the customer's site, will be dismantled in mid-February

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 15,000 mm Y-axis travel: 1150 mm Z-axis travel: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum Quantity Spraying Tensioner detection and automatic displacement 16 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Num calculator has been updated to Windows 10 control Spindle has been completely overhauled by the manufacturer (6-month warranty) Loading is included in the price, machine is dismantled in our warehouse Weight: approx. 14,500 kg

corner joining press Elumatec EP 120 incl. support arms + tools Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Double mitre saw Elumatec DG 79 3000 mm with E 255 1 x stationary 1 x mobile Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper

SBZ 151/60 5 axles with cut 7.3m from Elumatec as good as new. Less than 500 working hours have been commissioned and maintained by Elumatec. Original price € 421,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

DG 244 by Elumatec 6m 580/5 . in mint condition. Under 500 hours of work. Original price € 110,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

SBZ 140 Profile machining centre 6,4m 4-axis from Elumatec.

SBZ 630/11/R machining center from Elumatec in mint condition. The machine has only been put into operation by Elumatec, otherwise never used. Original price € 636,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.