DARLEY used machine for sale

Key data: 150 t, 3600 mm, 3100 mm

Capacity: 150 ton Bending length: 3,600 mm Stand width: 3,100 mm Back gauge: 600 mm Stroke length: 240 mm Projection: 400 mm Controls: Delem 52 Equipped with: - 1 set of bending tools - Hand/foot control Country of origin: Netherlands Motor power: 11 kW Machine LxWxH: 3750 x 1500 x 2900 mm Machine weight: 14.500 kg

Key data: 200 t, 3100 mm, 2550 mm

Darley EHP 200 Press Brake Manufacturer: Darley Type: EHP 200 31/25 Year of manufacture: 1990 Control System: Delem Technical Specifications Effective length: 3100 mm Capacity: 200 t Distance between columns: 2550 mm Main motor power: 15 kW Dimensions: approx. L 3.3 x W 1.7 x H 2.5 m Weight: approx. 9 t Accessories Documentation for the machine A set of tools

3100 x 6 mm Year. 1992

3100 x 110t.

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t.

Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts.

Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools.

type: EHP-LS 130.31/25CL, max capacity 1300kN, working span between stands 2550mm, stroke length 225mm, max working length 3100mm, max opening table/holder 410mm, table width 100mm, table height 900mm, equipped with: Steel case with interchangeable props and dies, 120 oil tank, 2 cylinders, backgauge DC320

Description: CNC press brake folding long 4300 mm between steander 3700 mm max. pressure 300 tons Power 33.5 kW stroke 300 mm Projection upright 400 mm DELEM DA-65W control system CNC crowning Hydraulic tool clamping no tools weight approx.: 21,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,200 x 3,600 mm

pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 250 mm dayligth: 375 mm stroke: 150 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 160 mm work height max.: 900 mm oil volume: 130 ltr. total power requirement: 7.5 kW weight of the machine ca.: 8700 kg range L-W-H: 3220 x 1290 x 2550 mm well maintained / good condition () Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block i ...

pressure: 50,0 t chamfer lenght: 2050 mm distance between columns: 1550 mm dayligth: 320 mm stroke: 120 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 75,0 mm/sec column arm: 250 mm work height max.: 900 mm table width: 100 mm connected load: 7,2 kW oil volume: 90 ltr. weight: 2600 kg range L-W-H: 2250 x 1100 x 2050 mm Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 3100 x 10 mm Delem DAC 350 control good condition inspection possible

The machine is in good technical condition, inspection possible upon agreement. Specifications: Max. bending length 4300 mm Distance between columns 3700 mm Max. pressing force 300 T Dis. Beam - Table 485 mm Beam stroke 300 mm. Dimensions (Estimate) Length 5200 mm Width 2200 mm Height 3600 mm Weight 21500 kg

Delem CNC control (DA65w) Y1, Y2, X and R axis CNC controlled CNC crowning Hydraulic WILA NS top clamping Laser system front (bridged) 1 set of complete tools incl.

Capacity 4300 x 230 tons Delem DA 66W CNC control CNC Bombing Y1, Y2, X1, X2, R1, R2, Z1 and Z2 axis CNC controlled Hydraulic Wila New Standard top and bottom clamping

Hydraulic press brake prod. by Darley Holland, type EHP 150.36/31 rb. 1996. Pressure 150 t, working length 3600 mm, Between sides 3150 mm. Loading 350 mm. Stroke 240 mm. CNC Delem DA58 control, controlled axes; Y1-Y2-X-R. CNC table deflection arrow compensation. Stamp mounting - Wila. Multi-groove die 110x110 mm with the largest groove V=90 mm. Installed power 12,7 kW, machine weight 12000 kg. Simple and powerful press brake for heavy processing-bending of thick metal sheets in 3 shifts. Full technical documentation DTR, safety instructions in Polish.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Pressure 110 t, working length 3100 mm, between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. Delem DA42 CNC control, controlled axes; Y1-Y2-X+ hydraulic tool clamping Installed power 7.5 kW, machine weight 7000 kg. Full technical documentation, OHS manual in Polish.

Hydraulic press brake prod. by Darley Holland, type EHP 50 25/20 rb. 1986. Pressure 50 t, working length 2500 mm, Between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. CNC Delem DA42 control, controlled axes; Y1-Y2-X. Installed power 5.5 kW, machine weight 4000 kg. Full technical documentation DTR, safety instruction in Polish.

Darley GS 1100x20 guillotine, cutting length 1100 mm, sheet thickness up to 20 mm. The machine is fully operational, an additional set of knives.

pressure: 320 t chamfer lenght: 3200 mm distance between columns: 2740 mm stroke: 400 mm Center of spindle to wall or column: 420 mm dayligth: 650 mm engine output: 32,5 kW oil volume: 350 l Control: total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4,75 x 2,80 x 3,60 m Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 300 t Folding length: 4300 mm CNC Brand: Delem CNC Model: Delem DA65 Max. bending length:        4300mm Distance between column:    3700mm Max. pressing force:        300T Dis. Beam - Table:          485mm Beam stroke:                300mm Table Width:                250mm Troth beam:                 400mm Approch speed:              80mm/min. Working speed:              10mm/min. Return speed:               80mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  5 Crowning:                  &n ...

sheet width: 3700 mm plate thickness: 16 mm distance between columns: 3860 mm throat: 100 mm back stop - adjustable: mm down holder: 12 Stk. total force of the downholder: 24000 kg oil volume: ca. 500 l total power requirement: 30 kW weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 2,5 x 2,5 m Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC press brake make DARLEY type EHP 50-25 / 20Machine -No: 12940 Year 1988Max. Press force: 50 tNumber of cylinders: 2Working length: 2550 mmPassage between the uprights: 2050 mmlateral. Discharge: 250 mmTable width: 100 mmLowering speed: 100 mm / sec.Working speed: 13.5 mm / sec.Retraction speed: 75 mm / sec.Drive power: 5.5 kWWeight approx: 3.6 tOutside dimensions approx: 2750 x 1100 x 2050 mmWith- 1 cpl. upper tool- 1 cpl. lower tool- hydr. Clamping the upper tool- CNC control DELEM DA 42 X / Y- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make DARLEY type EHP 200/43/37Year of construction 1989Max. Pressure force: 200 tMax. Working length: 4300 mmNumber of cylinders: 2Stroke: 225 mmPassage between the stands: 3700 mmlateral. Discharge: 300 mmLowering speed: 80 mm / secPress speed: 8.5 mm / secRetraction speed: 50 mm / secDrive power: 15 kWDimensions L x W x H: 4420 x 1680 x 2800 mmWeight approx: 18 tWith- CNC control DELEM DA 42- 2 axes controlled X, Y- shared universal die- to U-rail- Sharp pointed tool- Rehfoot tool shared- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make DARLEY type EHP 110 31/25Year of construction 1990Press force: 110 tWorking length: 3100 mmPassage between the uprights: 2550 mmStroke length: 150 mmLowering speed: 100 mm / sec.Max. Press speed: 8.0 mm / sec.Retraction speed: 65 mm / sec.Drive power: 7.5 kWWeight approx: 8700 kgOutside dimensions approx: 3220 x 1290 x 2440 mmWith- CNC control Delem DA 22- Bombing device- universal die- Split goat foot tool- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet thickness: 8,00 mm void: 0 Table length: 6000 mm Table width: 0 mm Knife length: 0 mm MACH-id  3449 MAKE   Darley Holland TYPE   GS 6000 x 8 mm YEAR   1989 SPECIFICATIONS Controll   Conventionel Guillotine / Lazer / Cutting table   Guillotine Cutting lenght   6000 mm Maximum sheet thickness   8 mm Backgauge stroke X in mm   1000 mm DIMENSIONS Length   6800 mm Width  3500 mm Height  2700 mm