WOERNER used machine for sale

- Table size: 260 x 290 mm - Spindle holder: drill chuck - Coolant device: yes - Total power: 0.55 kW - Machine weight: 380 kg - Space requirements (W x D x H): 0.8 x 0.7 x 1.8 m Details well-maintained machine immediately ready for use Accessories Various guide cartridges, incline: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25

Wörner Table Drill - Speed: 700 - 11,000 1/min - Height: 500 mm - Width: 200 mm - Depth: 400 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Item No. 4954: 1 gebr. Bench drill Fabr. WÖRNER, Type B4, Bauj. 1990 with drilling capacity 4/6 mm - 650-12.000 min-1 Arb.-Ber.: Table 180 x 160 mm, Other: Drilling depth 50 mm Spindle cone B 10 Weight approx. 50 kg

This in-line drill consists of three drilling units, a BG 16 drill head which is also suitable for thread cutting and two B13S drill heads. Drilling depth is 120 mm and the drilling table is height-adjustable. Name: In-line drill Manufacturer: Wörner Type: BG16 / B13S Material: Normal steel Drive motor: 1 x 0.9 kW and 2 x 0.75 kW Dimensions: L 1300 mm x W 800 mm x H 1800 mm Empty weight: approx. 800 kg Speed: 95 - 600 rpm Condition: Used Tech. Documentation: No Accessories: 3 drill heads, drilling depth 120 mm, drilling table height adjustable Price: On request

Wörner series drilling machine 4 units in circular arc alignment Built in 1958 MK2 spindle - speed change by Keilreinemscheibenwechsel Shaped casting table - drilling units height adjustable max wide table/spindle: approx. 500 mm - and rotatable with clamp. Drilling units throat depth: 280 mm Coolant system on each drilling unit; 1 x Unit TIBO 13 with Albrecht Chuck 0-13 mm left/right rotation Stroke: 0-100 mm with drill depth - fine adjustment screw Rpm: 560-3500 RPM motor 0.55 kw 50 Hz 380V 3 x units UNIVA 16 MK 2 recording left/right rotation speed: 540-3600 RPM (gear reduction speed unit is missing) Engine power: 0.55 kw 50 Hz 380V -of which a unit of UNIVA with automatic speed switching for tapping saturation (return 1.5 fold) speed: 350-2300 RPM (gear reduction speed unit is missing) Engine power: 0.4/0,35 kw 50 Hz 380 v 900/14540 U/min Stroke: 0-100 mm wit ...

with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798

with FUNKE heat exchanger TDW 2490-0

Number of drilling stations: 4, drilling stations: 1x BG16, 3x B13, year of construction unknown, an inspection is possible.

Description: WOERNER 4-Head Table Drill Approx. Onsite Dimension. (l x w x h): 1,550 x 800 x 1,700 mm, weight approx.: 1,100 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump 1: 220/380 V 0.09 kW -Pump 2: 440 V 0.105 kW -Number: 2 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Lube central lubrication unit: MMX-W -Motor: 100 V/0.01 kW -Dimensions: 280/190/H230 mm -Weight: 9.3 kg

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Projection: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Lubrication pump WOERNER PFZ-A/0.12 New ! Dimensions: 130 x 120 x 100 mm

Lubrication pump WOERNER PFZ-M 1,25/5/P 1.13/P V: 1,25 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm

Lubrication pump WOERNER PFZ-M 1,65/4/P 1.16/P V: 1,65 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm

Central lubrication, lubrication pump with tank WOERNER B-100 375.820-6A 12 bar tank capacity approx. 90 l Engine: 0.37 kW 220 - 240 / 380 -420 V used, tested ! Dimensions: 810 x 650 x 750 mm

Volumetric flow limiter WOERNER DUK-A/2,5/0 unused! Dimensions: 125 x 55 x 50 mm

Volumetric flow limiter WOERNER DUK-A/0/1,8 unused! Dimensions: 125 x 55 x 50 mm

Central lubrication level gauge WOERNER KFI-E/B/W/W/300/230 IP65 New ! Dimensions: 420 x 90 x 90 mm

Series drilling machine make WÖRNER type B 13Fabr. -No: 35616-35621 = 6 drill heads arranged in semicircleNumber of drill heads 6Drilling capacity 13 mmeach 12 speeds 280 - 3550 rpm.Quill stroke 120 mmDischarge 250 mminner semicircle 780 mmTable width 375 mmouter half circle 1155 mmDrive power 0.55 / 1.1 kWWeight approx. 2 tDimensions L x W x H 2300 x 1500 x 1470 mmWith- height adjustable design- working position = sitting in the inner semicircleused, optics industry, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-head in-line drilling machine make WÖRNER type TB 13Machine -No: 7188Technical specifications:Drilling capacity: 13 mmSpindle speeds: 560 - 3500 rpm.Number of spindle speeds: 2Quill stroke: 70 mm1 spindle speed: 260 - 480 rpm.1 quill stroke: 180 mmwith- R + L run with 3rd spindle / thread- Table size 1030 x 310 mm- Table height adjustment- Heads with height adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Drilling capacity: 0 mm Number of drilling units: 0   Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 4 Drill capacity: 4 mm Drill depth (spindle stroke): 50 mm Table length: 900 mm Table width: 160 mm Taper in spindle Depth of throat: 130 mm Spindle speeds: number (steps): 8 from: 650 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 200 kg Various accessories: Drill chuck: 4