WEMAS used machine for sale

- X: 750 mm - Y: 500 mm - Z: 500 mm - Table size: 490 x 950 mm - Speed range: 9,000 rpm - Spindle mount: SK 40 - Internal coolant supply: yes - WZ changer: 20-speed - Control: Heidenhain 426 / 430 CB - Control ON: 36299 h - Program run: 16867 h - Total power: 25 kW - Condition: good, ready for immediate use - Machine weight: 4000 kg - Space requirements (W x D x H): 2.7 x 2.2 x 2.4 m Details Coolant tray, no chip conveyor Accessories Documentary, 9 SK40 recordings

X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.

Description: CNC machining X / Y / Z 1020 x 600 x 650 mm Table dimensions 1100 x 600 mm Feed rate 36 m/min Sk40 spindle 10,000 revolutions ATC 30 positions Heidenhain iTNC530 Spindle hours 5900 H spanefoerder This device has not been tested and is therefore only suitable for parts , weight approx.: 5,900 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,100 x 2,100 mm

Description: Turning diameter over bed: approx. 280 mm Turning diameter over support: approx. 140 mm Center width: approx. 400 mm Spindle bore: approx. 27 mm Speed range: 100 - 2000 rpm With drilling unit installed on the lathe (see pictures) Internal size designation of the lathe: 260 x 500 weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,600 mm

Description: Portal milling machine X/Y/Z 2200 x 1650 x 800 mm between uprights 2100 mm table load 10 ton Sk 50 10,000 revolutions 25 kW Heidenhain iTNC530 HR 410 heidenhain handwheel Double chip conveyor IKZ 20 bar Oil chiller approx. 18,000 spindle hours New cover in X/ Approx. Onsite Dimension. (l x w x h): 6,500 x 6,000 x 3,900 mm, weight approx.: 27,000 kg

This WEMAS VZG 65-5A Vertical Machining center was manufactured in the year 2018 in Germany. It is equipped with a HEIDENHAIN TNC640 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This WEMAS DZ150 Lathe was manufactured in the year 2000. It is equipped with a HEIDENHAIN CNC S42 control unit. The machine has a spindle speed of 40-5000 rpm.

Wemas VZ 860 Quick Control Heidenhain TNC 620 Travel X/Y/Z 860/600/650 mm Spindle speed 10,000 rpm Tool magazine for 30 tools - SK40 Linear path measuring system Glass scales in X/Y/Z axes IKZ with 30 bar Blowing air outside Chip conveyor Loading of the machine onto a truck, trailer, etc. can be taken over by the seller. The machine was not used for four years due to long unexplained differences with the machine manufacturer. In the meantime, these have all been resolved and cleared up, but we are forced to sell the machine due to our current personnel situation.

turning diameter: 303 mm turning length: 334 mm control: Fanuc Oi-TD total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Antriebsleistung Spindel / drive  ...

Cycle controlled lathe make WEMAS type HITURN 320Machine -No: 24 built in 1999Turning diameter over bed 320 mmTurning diameter over cross support 150 mmTip width 800 mmSpindle bore 50 mmCone in the spindle - metric 60Motor power at 1500 rpm 7.0 kWSpindle speed rangeControl system Heidenhain 1st row 0 - 1000 rpm. 2nd Row 20 - 4000 rpm.X-axis diameter of the lead screw 20 mmLeadscrew pitch 5 mmMax. Stroke 190 mmRapid feed 7500 mm / minMax. Feed force 3000 NAccuracy of repeated position adjustment 0.008 mmY-axis diameter of lead screw 25 mmLeadscrew pitch 5 mmMax. Stroke of the support carriage : 750 mmRapid feed : 8000 mm / minMax. Feed force 5000 NAccuracy of repeated position adjustment 0.008 mmTool head Multifix Bmax diameter of the steel 25 x 25 mmtailstockPinhole diameter 65 mmQuill stroke 125 mmCone of the quill Morse 4Dimensions 2160 x 1594 x 1875 mmWeight approx 2150 kgWith- HEIDEN ...

Turning diameter: 620 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: Heidenhain CNC Model: Manuel Plus Swing over bed Ø  620 mm ControlHeidenHain Manuel Plus Swing over cross slide  400 ? mm Distance between centres  2000 mm Power35 kVa Kw