PFAUTER used machine for sale

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

P1251

One servo motor for each X/Z/A/ and C-Axis

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

Various interchangeable wheels for the gearbox Speed...

Div. Interchangeable wheels for the gearbox Speed...

For sale a milling head without counter bearing

For sale a milling head at the company Pfauter ca.2012 completely overhauled.

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

Description: SN 13135 Toothing width - max. 25 mm Pitch circle diameter - external toothing 120 mm Pitch circle diameter - internal toothing 120 mm z-way 150 mm Spindle diameter 85 mm Mounting taper - steep taper PKP 45 Workpiece table - Ø 160 mm Table bore 63 mm Stroke rate - infinitely variable 500 / 2500 strokes/min Workpiece speed max. 125 1/min. Bevelling angle - max. + / - 45 ° Tool diameter max. 125 mm Table load max. 1000 KG Minimum distance table surface - tool spindle 0 / + 180 mm Maximum distance table surface - tool spindle 200 mm Maximum distance table surface - tool spindle 350 mm Connected load 40 kVA Description: Motorised stroke adjustment, workpiece storage, automatic workpiece change, chip conveyor (magnetic), coolant device Dialogue program, fault diagnosis max. wheel diameter: max. 250 mm, module min./max.: max. 3,5, control: SINUMERIK 840 C S ...

Description: Change Gears/Gears: This 32-piece steel change gear set consists of: Gears with the number of teeth from 20s - 149s Approx. Onsite Dimension. (l x w x h): 400 x 250 x 200 mm, weight approx.: 50 kg

Description: Replacement table PE 500, face plate, face plate chuck, face lathe chuck, with 6x T-slots 40x20 mm, Technical details, faceplate diameter 450 mm, inner diameter 160 mm, height 110mm, Weight 125kg weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Description: Additional information: Pfauter control cabinet for P 750 NC, - Heldt & Rossi servo amplifier SM 807 DC 1750-90, serial no. according to photo, good condition, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm

max. wheel diameter: 630 mm gear width: 410 mm max. module: 8 min. module: 1 milling spindle speeds (infinitely variable): 62 - 390 U/min max. milling cutter diameter: 192 mm cutter length max.: 258 mm table diameter: 550 mm total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 3,7 x 2,5 x 2,1 m Chip conveyor, change gears, arbors, toolings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Talladora de fresa madre PFAUTER PA 210, Ø max. gear: 430 mm, Module: 8, Hobbing length: 275 mm, Brand cnc: SIEMENS, Cone milling spindle: MORSE 5, Hob spindle speeds: Max 550 r.p.m., Maximum inclination: +/- 40º, Maximum length tool: 228 mm, Maximum ø of tool: 163 mm, Minimum number milling teeth: 4, Number of axles cnc: 4 (Z, X, B and C), Tangential tour: 170 mm, Ø hole table: 90 mm, Ø table: 240 mm, Axial power motor (z): 13 Nm, Radial power motor (x): 13 Nm., Motor power table (c): 20 Nm., Power tool motor (b): 12 Kw, Total power: 36Kw, Voltage: 220/380 V, High: 3.085 mm, Long: 5.970 mm, Weight: 3.085 mm, Width: 2.940 mm

amount: 36 STK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mm gear width: - mm max. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVA weight of the machine ca.: 11,7 t dimensions of the machine ca.: m We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle o ...

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1800 mm gear width: 735 mm max. module: 12 min. module: 1 total power requirement: 30 kW weight of the machine ca.: 23 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.