We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 486 kN (50 t) Specific pressing force: 6.5 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Main pump capacity: 130 l/min. Total connected load: 39 kW, Nominal current: 83 A Back-up fuse min.: 100 A Back-up fuse max.: 100 A Throughput at idle: approx. 295 m³/h Throughput under operating conditions: approx. 120 m³/h Output at 35 kg/m³: approx. 4.2 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 750 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: approx. 12 t
used
Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
used
Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1050 mm Year of construction: 2020 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 8.5 tons/hour Theoretical throughput to density 50kg/m3: 11.6 tons/hour
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1200 mm Year of construction: 2015 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 6.7 tons/hour Theoretical throughput to density 50kg/m3: 9 tons/hour Press capacity: max 190 m³/h
used
automatic baler Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 485 kN (50 t) Specific pressing force: 6.4 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Total connected load: 92 kW, 175 A Throughput at idle: approx. 285 m³/h Throughput under operating conditions: approx. 125 m³/h Output at 35 kg/m³: approx. 4.4 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 1,250 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: up to approx. 12 t
used
Maximum pressure: 95 tons Year of construction: 2008 Pressing force: 115 tons/m² Number of ties: 4-fold vertical Duct cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Power supply: 400 V/ 75 kW Bale tying: automatic Specifications No-load capacity: max 340 m³ / hour Theoretical throughput to density 35 kg/m³) 11.5 tons/hour Theoretical throughput to density 60 kg/m³) 20 tons/hour Theoretical throughput to density (100 kg/m³) 32 tons/hour Brief description of the features: • Open hopper allows filling with the conveyor belt • Knife on the press plate and on the frame of the press to cut off the excess raw material • Automatic rod • Automatic channel regulation • Choice of the length of the finished bale • Compact hydraulic power unit with low noise level emissions • Press plate stably guided on 8 rollers ...
used
Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91
used
Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor
new
Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW
new
New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.
used
Baling press Paal KONTI-275 D, year of manufacture 2002, pressing force 75 t Specifications: Manafacture: Paal Type KONTI-275 D Year of construction: 2002 Hours 19841 Pressing force 75 t Drive power 75 kW Filling opening 1,020 x 1,550 mm Bale dimensions 1,100 x 750 mm, length variable Throughput rates at a Bulk density of 35 kg/cbm approx. 12 t/h Bulk density of 60 kg/cbm approx. 21 t/h Bulk density of 100 kg/cbm approx. 33 t/h Bale weight 500 to 750 kg Binding: 5-fold Machine weight approx. 25 t Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.
used
automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side
used
Specifications Maximum pressure: 85 tons Pressing force: 103 tons/m² Trunking cross-section: 750 x 1100 mm Power supply: 400 V/ 45 + 30 kW Year of construction: 1992 Number of bindings: 4 - fold vertical Dimensions of the tailgate: 1020 x 1750 mm Weight: 26 tonen Bale binding: automatic
used
Baler Paal Pacomat II with hopper, year of construction 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of construction: 1979 Drive power: 11 kW Pressing force: 27 t Trunking cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: ca. 5200 kg
used
Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour
used
automatic baler Manufacturer: PAAL Type: PACOMAT V-80 D Year of construction: 2018 Operating hours: 2,100 h specifications: Pressing force: 82 t Specific pressing force: 97 N/cm² Press pressure: 315 bar Channel format: 750 x 1,100 mm Filling opening: 1,600 x 1,020 mm Binding: 4-fold vertical Drive power: 22 kW Total connected load: 31 kW, 30 A Throughput: - approx. 275 m³/h max. at idle Machine weight: approx. 17 t
used
used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)
used
Roll splitting machine Manufacturer: PAAL Type: RS 100 / 200 Year of construction 1992 with screwed-in track roller guide and in closed frame construction specifications: Roll length maximum: 2000 mm Roll diameter maximum: 1000 mm Drive power: 7.5 kW Cutting force: 20 t Cutting speed: 4.8
used
automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding
used
used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg
used
used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm
used
used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE
used
automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side
used
used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, - ...
used
automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t
used
automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...
used
used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...
used
baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg
used
1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material