OERLIKON used machine for sale

Center height 225 mm Center width 1000 mm Spindle bore 42 mm

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Arc welder Manufacturer: Oerlikon Type: Minicito

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Various spare parts for Oerlikon lathes.

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Machine type: WIG welding machine. Manufacturer: Oerlikon. Model: DTW 251-2. Year of build: 1990. Condition: good,. Type of offer: used machine, ,. Technical data:. Type: WIG / Electr.,. Supply: 400 v, Power: 250 amps. Note: 9.6 of kVA, water-cooling of. Weight: 150 kg. ,. The machine is in a good shape and ready for operation. It can be visited and demonstrated at our location.,. ,. We will be pleased if you take an interest in our offer.,.

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Accessories: -Three jaw Chuck ø 630 mm -Multi fix steel holder Tip height 400 mm Top width 2000 mm Recording camlock Turning diameter in the offset 900 mm

With Plasma Cutter SAF NERTAJET HP125.

The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition.

Distance between the columns: 1700mm, table dimensions: 1000x1180mmm, max. load: 3t, length: 2600mm, width: 1900mm, height: 2660mm, weight: 10t, including documentation.

Without hose package

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

Mobile; equipped with welding torches and pipes; equipped with earthing clamp; without gas cylinder;

Description: Voltage 220 V, IS max. 500 A, with three-jaw chuck, without further accessories Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 120 kg

spindle diameter: 82 mm x-travel: 850 mm y-travel: 1100 mm Table dimensions: 1200x1130 mm work height max.: 1100 mm spindle turning speed range: 10-1500 U/min spindle taper MT: 5 digital readout: spindle stroke: 370 mm Boring power: 70 mm throat: 995 mm Feed: 0,03-2,2 mm/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 3x3x3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.