We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
2-Head Drill Floor model with base cabinet Foot switch
used
Inv. Num. : 6908 Type: SCE/L 25 Producer: Nagel Created: 2001 Parameters: Nominal current: 7 kW Control system: Siemens Simatic OP 27 Vibration deflection: 3 mm Stroke of the stone guide: 35 mm Max pressure: 4 bar Length: 2100 mm Height: 2200 mm Width: 1200 mm Machine weight: 2000 kg Equipment: Manual
used
Condition: Very good condition
used
Built in 1990 Staple Stitching Machine 2 stitching heads electr. Drive electr. Foot switch incl. base frame Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
Nail Foldnak Compact Booklet Machine; good condition; cleaned and tested; 2 staple stitching heads; Paper size max. 325x450mm, min.105x210mm; Pressing device; Front trim; Shed display. Bookletmaker Nagel Foldnak Compact; good condition; cleaned and checked; two stapling heads; paper size max.325x450mm, min.105x210mm; pressing down unit; Trimmer; stream delivery.
used
Tying Machine Nail Foldnak 80 + Trimmer 100 Art.Nr. PS5914
used
Paper Drill Nail Citoborma 490 Year of construction 2006 Kind. Ref. PS5877 very good condition, comes from authority! Price 2300 Euro FCA Essen, Germany
used
electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles,
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: - Gathering tower S8 - Staples and folding Foldnak 100 - Front trimming trimmer 100 Nail Gathering Tower S8 Specifications: - 8 stations - Stack height cover sheet station: max. 130mm - Stacking height 2-7 station: max. 65mm - Format: min. 105x160mm; max. 364x520mm - Capacity: 5,000 sets/h - Dimensions: 2.140x650x770mm - Weight: 160kg Foldnak 100 Technical details: - Format: min. 140x148.5mm; max. 364x521mm - Capacity max.: 3000 sets/h - Dimensions: 115 x 72 x 118cm (HxWxD) - Weight: 220kg Trimmer 100 Technical details: - Brochure sizes: min. 74x148.5mm; max. 260,5x320 - Max. output: 3000 cuts/h - Brochure thickness max.: 5mm (approx. 50 sheets, 80g/sqm) - Dimensions: 106 ...
used
1 drilling head
used
Standard, 2 drilling heads
used
2-spindle paper drilling machine
used
Stapling machine nail Multinak S
used
Sr. No.: 801831
used
Brochure production Nagel Foldnak 8
used
- standard machine - with the existing accessories
used
Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional
used
Inspector, Fabr. Nail, Type: NAG, Type: Full inspection 5/8, up to 5,000 fl/h, furnished on 0.33 lt BV-Maurer + 1.0 lt bracket, KK 0.33 lt Gourmet, KK 0.5 lt NRW + EURO, running direction re->li for floor, muzzle, sidewall and lye control with new card for side control serviced annually
used
Stapling Machine
used
2 Head Stapling Machine Year: ca. 1987
used
Paper drilling machine Nagel Citoborma 280 AB
used
Brochure & block stitching machine Gable roof & flat table position 1-head model Stitching head spacing normal 8 cm works with staples (not with wire roll) Stitching up to 25 mm / stinging up to 45 mm Staple ring brackets option Stand model Electric motor Foot trigger
used
Equipment / Additional information: Tools
used
Equipment / other information: 11xdrills & trolley
used
2x Bags Perforation unit Machine is tested and works perfectly
used
Machine is cleaned and tested
used
Clip stitching machine nail Multinak S; good condition; cleaned and checked. 2xHeftkopf 24; Block or saddle stitch. Twin head stitcher nail Multinak S; good condition; cleaned and checked; two heads 24; flat or saddle staplinng.
used
Four head paper driller Nagel Model Citoborma 480 AB Year 1988 Details 4 head paper driller with adjustable heads with tabulator Operation Electric Available Direct
used
- 2 head drilling machine - standard machine - desk model
used
There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available.