We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min
used
Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted
used
Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable
used
Connected load: 2kVA, an inspection is possible.
used
Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes.
used
Description: Roller dia: 320mm Table size: 500x500 mm Motor Power: 1,3kW Projection width/height: 310/230mm Weight approx: 500kg throat: 310 mm, roller diameter: 320 mm, workpiece height max.: 230 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/320 -Drive: 0.9/1.3 kW -Cutting width: max.205 mm -Cutting height: max.310 mm -Saw band: length 2530 to 2650 mm -Saw band speed: adjustable in 8 stages -Work table: swiveling in 2 axes: -Dimensions: 830/785/H1630 mm -Weight: 449 kg
used
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner, vertical band saw Rekord type SSF/420 with saw band welder -Drive: 2.2 kW/380 V -Cutting width: max. 410 mm -Cutting height: max. 250 mm -Band saw: length 3150 to 3260 mm -Saw band speed: 15 - 1800 m/min -Work table: swiveling -Band saw welder: Ideal BSS 016 -Dimensions: 1050/800/H1950 mm -Weight: 576kg
used
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg
used
roll diameter: 400 mm throat: 420 mm workpiece height: ca. 220 mm table-size: 600 x 600 mm cutting speed: 12 - 375 m/min saw band length: 3160 - 3260 mm saw band width min./max.: 3 - 12 mm total power requirement: 3,6 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 0,6 x 1,0 m Optical condition: very good: Mechanic: very good: Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: New castors Emergency stop Both doors electrically locked Swivel table Circuit diagram has been redrawn Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: Machine overhauled in 2023 New castors Emergency stop both doors electrically ...
used
roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: / mm throat: / mm workpiece height: / mm cutting diameter: / mm saw band length: / mm table-size: 600 x 600 mm total power requirement: / kW weight of the machine ca.: ca. 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vertical band saw MÖSSNER type Rekord SM 420 Masch. No. 25615 Year of construction 1983 Roll diameter 420 mm Projection in width 410 mm Projection in height 295 mm Table size 600 x 600 mm Belt speed 12-375 m/min. 8 steps Saw blade length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 Volt, 50 Hz - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guidance Height adjustment with handwheel - Work table tiltable +/-45 - Work table tiltable 10- Foot switch for on-off Space requirement L x W x H 1000 x 800 x 1970 mm Weight approx. 600 kg very good condition; used
used
Vertical bandsaw Fabr. Mössner type SSF 1050Machine -No: 25331 Year 1982xa0xa0xa0xa0xa0Technical specifications:Projection: 1050 mmCutting height: 550 mmRoll diameter: 500 mmHeight clearance table / band saw guide: 530 mmProjection in width over 2 rolls: 485 mm: over 3 rolls: 1050 mmSaw band length over 2 rolls: 3920 mm:: over 3 rolls: 5250 mmSaw band width :: 3 - 20 mmTable size (worktable): 750 x 1050 mmTable size (additional table): 450 x 450 mmTable tilt :: 2 u. 4 sided 15 inclinablestepless cutting speed: 15 - 940 m / min.Cutting speed overdrive: 2350 m / min.Max. Melting height: 15 mmDrive power: 4.0 kWWeight approx: 1740 kgExternal dimensions approx: 2100 x 1000 x 2100 mmWith- Band saw blade welder Ideal BS 25- scissors and grinding motor- Stepless saw blade speed via PIV control gearbox- Voltage indicator hydr.- Air pump- exchangeable aluminum castors with vulcanised hard rubber ...
used
Vertical metal band saw machine MÖSSNER type SM 420Masch. -No: 19357 Year of construction 1971Technical specifications:Roll diameter: 420 mmCutting height: 265 mmThroat: 410 mmSaw band length: 3150 - 3260 mmSaw band width: 3 - 16 mmTable size: 600 x 600 mmTable inclination: 30/15 °8 band saw speeds: 12 - 375 m / min.Table height: 1020 mmDrive power: 1.1 / 1.7 kWWeight: approx. 590 kgExternal dimensions approx: 980 x 870 x 1850 mmWith- Band saw welding machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical band saw machine MÖSSNER type SSF 500Machine -No: 10077 built in 1961Technical specifications:Roll diameter: 500mmProjection: 485 mmTable size: 600 x 700 mmTable swivelling:+/- 15°Drive power: 2.0 kWWeight approx.: 800 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Height under guides: 420 mm Throat: 420 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Vertical bandsaw Cutting capacity 90 ˚ Ø420 mm Cutting speed M/min 18 - 2280 M/min
used
roll diameter: 420 mm throat: 410 mm workpiece height: 295 mm cutting speed: 12 - 375 m/min table surface area: 600 x 600 mm saw band length: 3150-3260 // 3-16 mm work height max.: 1020 mm voltage: 380 V total power requirement: 1,1 / 1,7 kW weight of the machine ca.: 620 kg dimensions of the machine ca.: 1000 x 800 x 1900 mm from a maintenance workshop - good condition () Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: ja weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.