MÜLLER used machine for sale

Offer 24163 Technical data approx.: - Compressive force 135 t - Projection 350 mm - Table size approx. 1000 x 680 mm - Through-hole in the table mm - Maximum installation height approx. 460 mm - Plunger area 350 x 280 mm - with lateral cantilever, left + right, 125 x 200 mm - Tenon hole in the ram 50 mm - Plunger adjustability 65 mm - Stroke adjustment 20 - 180 mm - Stroke rate approx. 50 /min - Movable shielding, retrofitted in 1991 - Pneum. Actuated rotary wedge coupling - Drive 400 V / 7.5 kW - Space requirement approx. W 1500 x H 2550 x D 1800 mm - Weight approx. 9000 kg

4 MüLLER jacquard needle looms for labels and trimmings with woven soft selvedges, composed of: 1 MÜLLER type MVC2 200 14/36 768/448, year 1998, taffeta machine 1 MÜLLER type MVC 200 15/30, year 1995, satin machine 1 MÜLLER type MVC 200 20/20, year 1994, satin machine 1 MÜLLER type MVC 150 8/46, year 1991, satin machine

Enquiry number 390298 Machine type: Müller sharpening machine UR4-4 Working range wires and rods: from Ø 4 to Ø 22 mm / tubes: Ø 4 to Ø 44 mm Make Heinrich Müller, type: Rotary kneading machine UR4-4 Year of construction 2004 Location: Solingen Country of origin: Germany Delivery time Immediately possible

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

ID2753 Müller MS16 HFV year/Year of construction 1999 approx. 3900 hours/hours 3.5 t Vibrator, with hydraulic unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses Vibrator, with hydraulic power unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses

Machine Type: Eccentric Press Manufacturer: MÜLLER Model: Amp 100 Year of construction: 1967 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 100 t Projection: 310 mm Table: 910 x 600 mm Installation height: 410 mm Stroke: 10 – 100 mm Propulsion: 5.5 kW Remark: pneumatic two-hand and foot actuation, 80 ram strokes per minute, Plunger adjustment 60 mm, adjustable punching table, additional punching plate 890 x 595 x 85 mm Weight: 5300 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Hydraulic Press 400 ton Nominal Power 400 ton Slide Stroke 800 mm Slide dimension 1300 x 1600 mm Table dimension 1300 x 1600 mm Cushion Stroke 350 mm . ELECTRICAL SYSTEM COMPLETELY REBUILT IN 2020

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

1 MÜLLER label cut and fold machine type LCFR2, year 2017

Horizontal band saw / Müller HBS 230G /miter Cjkvx8b8yz with roller conveyor front/rear Cutting area - approx. 230mm Cutting area - square 230x230mm Cutting area - flat / portrait 250x230mm Cutting area - flat/flat 280x170mm At 45 degrees miter approx. 175mm At 45 degrees square 165x165mm at 45 degrees / flat / portrait 145x230mm At 45 degrees /flat 175x170mm at 60 degrees / miter round 170mm At 60 degrees /square 90x90mm At 60 degrees / tray / portrait 90x90mm At 60 degrees /flat 110x80mm Main engine / power 1,1 KW Speed range 30 - 60 m/min Band saw blade size 2700x27x0,9mm Dimensions: LxWxH 1400x800x1500mm Weight approx. 300Kg

1 MÜLLER air jet label loom MÜJET 2S type MBJL 2S 115, specification SPE5 1536/1152 T, year 10-2001, commissioned in 2002, tafeta machine, 8 colours, 740 rpm, MÜDATA 300, machine delivered with 3 weft feeders, 1 warp beam, 1 cloth roller, 20 thermal cutters

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW

Mueller milk cooling tank Model: RHS200 Serial: 31886 800L stainless tank, RHS milk coolers are designed for small quantities of milk, R12 refrigerant, top mounted stirrer, can also be used to heat a fluid or simply to keep isolated and warm/cold.

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request

Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.

Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.

Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.

Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manuf ...

Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:100 t distance between columns:1060 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:1250 mm table surface area:1000 x 700 mm pressure of drawing cushion in table:40 t stroke of drawing cushion in table:200 mm die cushion area:Ø 250 mm table height over floor:950 mm side window:580 x 750 mm ram surface:1000 x 700 mm oil volume:700 l power requirement:47,0 kW weight:13,0 t Dimensions (WxDxH):2,2 x 1,8 x 5,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical; motoric adjustable ram interlocking:SITEMA

pressure:315 t distance between columns:1620 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1100 mm pressure of drawing cushion in ram:20 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:300 x 300 mm side window:600 x 1100 mm table height over floor:750 mm ram surface:1600 x 1100 mm oil volume:1500 l power requirement:110,0 kW weight:35,0 t dimensions (WxDxH):4,65 x 2,61 x 5,5 m height over floor:5,05 m height beneath floor:0,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m