MÖHRINGER used machine for sale

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977

Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed,  ...

Specifications: Wheelbase: 1.3 m Number of strands: 4 strands Propulsion: 2.0 KW

Gebr. roller conveyor with built-in QFA Bearing No.: ame893 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2103 QFA M2105 Drawing number: ROGA 24200623 QFA 14800267 Specifications Roll width: 800 (mm) Length: 3.5 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor Wheelbase: 1.16 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Gebr. Roller conveyor Bearing No.: ame894 Make: Möhringer Year of construction: 2021 Machine number: M2102 Drawing number: 24200622 Specifications Roll width: 800 (mm) Length: 4.07 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 2.2 (kW)

Specifications: Wheelbase: 1.0 m Number of strands: 5 strands Propulsion: 2.2 KW

Gebr. roller conveyor with built-in QFA Bearing No.: ame896 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2101 QFA M2103 Drawing number: ROGA 24200621 QFA 14800266 Specifications Roll width: 1200 (mm) Length: 4,705 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 4.0 (kW) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor heavy Wheelbase: 1.56 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014

Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014

Lifting cross conveyor ame900 is installed in this roller table ame899 Length: 8m, 1600mm width, 4 kw motor drive - with ball-bearing rollers, mounted on Shape - Driven by a special geared motor - Position roller chain - Spring-actuated length compensation Furnishings - With 2 liftable support rollers to hold the cant - Fixed baffle wall

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

Frame width: 710 x 750 mm. stroke. 500 mm. speed: 300 RPM. Feed hydraulic stepless from 0-12 m / min. Hydraulic roller lift with adjustable roller pressure. Automatic overhang adjustment. Electric Zentralschnmierung. Hydr. Double yoke saw clamp with Hydr. Pump. Cutting unit with Bay fishing. Motor direct drive 90 KW - 740 RPM. Hydr. Quick clamping cars full hydraulic with electro hydraulic. Help car. 92 Gates was overtaken in 1997.; Good

Technical data: 6 kW Type: 233 407 00

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller  for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end

Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp

Track gauge: 980 mm Support height: 430 mm Drive: 0.37 kW - reinforced design - with tipping stool and circeaching roller chain for model - with a hydr. tilting and movable trough smelter provided with chains

Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m