We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table width 1,000 mm Table length 2,500 mm Abrasive belt cover tape/both rollers Suction Floor space Length 3,850 mm Width 1,300 mm Height 1,300 mm
used
Veneer cutting machine long fence LZ 2 Cutting length 3050 mm Height 45 mm Tension beam via manual control valve with compressed air The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
used
Long belt grinding machine, roller spacing approx. 3000 mm
used
Belt grinding machine for wood & metal, roller spacing approx. 3000 mm
used
Dates will follow later!
used
Pressure total: 700 ton Stroke: 600 mm Daylight: 1000 mm Table surface area : 3000 x 1200 mm Slide area: 3000 x 1200 mm Approach speed: 150 mm / sec Working speed: 1 - 10 mm / sec Return speed: 150 mm / sec Die weight at the ram max.: 4000 kg Required power: 65 kW Weight of machine approx.: 62 ton
used
Description: Front grinding table approx. 1000 x 350 mm Rear grinding table approx. 750 x 350 mm Wheel grinding table approx. 400 x 200 mm Feed units - Holzkraft Type ET 117 , 380 volt  ,550-750 watts , 1450 / 2850 rpm , 1.5-1.85 ampere , Included Sandpaper ( 200 x 3000 mm) main motor: 3 kW, table length: 1,000 mm, table width: 350 mm, grinding band dimension: 3000x200 mm, Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,200 mm, weight approx.: 400 kg
used
Description: Belt speed 19 m/sec Height adjustment 350 mm Stand projection depth 680 mm , Stand projection height 350 mm  , Table size 3000 x 1000 mm Belt dimensions: 7800 x 150 mm Space requirement for inserted table (L x W): approx. 4200 x 1600 mm Space requirement for extended table (L x W): approx. 4200 x 2150 mm Included Sanding belts (150 x 7800 mm) Belt sanding shoe ,(2 pieces) main motor: 5 kW, table length: 3,000 mm, grinding band dimension: 150 x 7800 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,500 mm, weight approx.: 400 kg
used
Description: Machine number 4/6664, motor 2.7 kW, including contact shoe device, table approx. 1250 x 390 mm, height adjustable via hand crank, sanding unit swivels 0 to 45° Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,600 mm, weight approx.: 400 kg
used
Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Grinding roller diameter: 2 pieces; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction port: 140mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 400kg;
used
Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,