We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 650 mm, 3000 mm
Kern CD 650 DMT / Cycle Lathe Year of construction 2008, Control Siemens 840 D, Travel X/Z 450/3,000 mm, Tool carrier Multifix, Turning length 3,000 mm, Spindle bore 103 mm, Three-jaw lining, Tailstock Conveyor coolant system, Connected load 48 KW,
used
Key data: 560 mm, 1200 mm, 380 mm
Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m
used
Kern scale, up to 50 kg d=5 gr. 12V500mA with wheeled trolley with storage option Scales 50x40 cm Table 66 cm wide, 80 cm long, 50 cm high. 3 Slide-in Scales complete height 1.30 m
used
Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...
used
Control: HEIDENHAIN Manual Plus max. turning diameter over bed: 340mm max. turning diameter over slide: 150mm max. turning length turning length: approx. 580mm Wheelbase: 750mm Spindle bore: 52mm max. main spindle speed: 1 - 4,000 rpm Main spindle DIN 55027 Bayonet: Wedge bar chuck FN RHU-200 Collet by hand: F48 8-fold SAUTER tool turret Tool holder: VDI-16 Tailstock with quill diameter: 60mm Travel: 140 mm Tool cone: Mk 4 Space requirement L x W x H: approx. 2.50 x 1.60 x 1.70 meters Dimensions control cabinet L x W x H: approx. 1.25 x 0.5 x 1.7 meters Machine weight: approx. 2'400kg Note: This machine is not located in Schijndel, but in Eersel.
used
Stock number: 3736 PROCESSING Manufacturer: KERN, Type: HSPC 25-16 Machine NO.: 436, Year of construction: 2000 Specifications: Longitudinal movement (X) 250 mm Transverse movement (Y) 220 mm Spindle speeds 35000 rpm Total power 10 kW A-ash B: Aschse Grad Control HEIDENHAIN 426 M Fabr. Controlled in axes 3+2 Accessories: CNC rotary table. Cooling water system. Length: 2100 mm, Height: 2300 mm, Width: 1700 mm, Weight: 3500 kg
used
1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter, ...
used
used
Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.
used
PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C + 35° C Humidity of air: max. 80 % (not condensing)
used
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
used
Description Counting scale Kern max load 6 Kg minimum load 100 mg power supply: 12 V (with 220/12 V power supply)
used
Scales, crane scales, hanging scales -Manufacturer: Kern, crane scale hanging scale type HFB 600K200 -Weighing range: up to 600 kg -Readability: 200 g -Power supply: battery operation -Operation: additionally with radio remote control -Dimension box: 240/120/H420 mm -Weight: 2,8 kg
used
Description: Machine number: 3201.29 Year of construction: probably 1993 Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Center distance: 1000 mm Longitudinal slide travel: 880 mm Cross slide path: 270 mm Turning length before chuck diameter: 200 mm With hard jaws: 830 mm Turning spindle: Spindle head: DIN55026 size 6 Spindle bore: 62.5 mm Spindle taper: 70 mm Main bearing diameter: 100 Tailstock: Quill stroke: 120 mm Quill diameter: 70 mm Mounting taper: MK 4 Chucks: Largest chuck diameter: 350 mm Largest turning chisel cross-section: 20 x 20 mm Feed drives: Feed force Z-axis: 10000 N Feed force X-axis: 6000 N Z-axis feed rate: 0.001 - 1000 mm/rev Rapid traverse Z-axis: 7 m/min X-axis feed: 0.001 - 1000 mm/rev Rapid traverse X-axis: 5 m/min Thread pitch lengthwise: 0.001 - 1000 mm/rev Speed range: 30 - 3000 rpm Transportation on standard truck Attention: no infor ...
used
serial number: WF17017379 : 10000 kg volt: 12 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Max. load capacity 5000 kg Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 30 kg
used
Description: Load capacity max. 3000 kg Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 30 kg
used
Description: Readability 50 g, weighing range 60 kg, reproducibility 50 g, linearity 100 g, support surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 310 x 300 x 55 mm, weight approx.: 5 kg
used
Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor
used
Year of manufacture: 2008 - Working range X 300, Y 280, Z 250 mm - Feed speed 0.01 - 16,000 mm/min - Acceleration 8 m/s2 Resolution: 0.1 μm Position spread Ps: ±0.5 μm CNC precision dividing head (4th and 5th axis) - System 3R Macro Chuck - Brushless servo drive, fully digital - Feed speed C/B 7000 / 3000 °/min - Swivelling range B from -10 to +120 degrees a - Heidenhain iTNC 530 smarT.NC - High-frequency spindle HSK E25 500 -50,000 rpm - Tool changer 95-fold - prepared for external workpiece changer - Minimal quantity lubrication - Extraction system - CO2 extinguishing system - Laser for tool measurement (Blum) - Infrared 3D probe - External recooler - External spindle cooling unit - External coolant unit with cooling - Vorma machine light Accessories - Shrinking device Haimer Power Clamp Nano - HSK E25 holders (KERN) ø 2 - 6mm (Total 115 pcs; shrinkin ...
used
Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg
used
Control: Manufacture: Fanuc type: Quick Turn mm turning dia. over bed: 400 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 230 mm turning dia. in gap: 460 mm spindle bore: 60 mm spindle taper:: DIN 55027 / Gr.6 spindle turning speed - stepless: 1-3000 U/min tailstock quill taper MT: 4 diameter of quill: 60 mm quill stroke: 120 mm total power requirement: 11 kW weight of the machine ca.: 1.6 t dimensions of the machine ca.: 275 x 140 x 155 cm x cm x cm Quick-change toolholder: Multifix B Number of toolholders: 6 3-jaw chuck: diameter: 200 mm Collet chuck: F48 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.