used HESS Hydro

Working width:3550 mm Working height:2250 mm Number of cylinders:32 St.

Large item of paints and varnishes in large containers of 25 litres and 30 litres. Multiple times present. Also to be handed over individually, inexpensive! Clou Acocryl Rapid 30 litres - multiple times available (approx. 7 pcs) Cloupur Dilution aromatic-free 30 litres Clou Acocryl - Hardener 30 litres Clou delayer for nito and DD coatings 5 litres 2x present Hesse Lignal UNA-Color Topcoat DB555-9005 2 K-Pur acrylate resin lacquer 25 liters 4 pieces available - RAl 9005 (Black), list price per litre approx. 12 EUR Hesse Unapur topcoat DE 554 2 K-Pur acrylate resin lacquer 25 litres 2x present Hesse Rustic Pickle NCL 5-53552 25 litres Lignal Universal DelayDV 499 Special dilution to extend processing time 25 litres All containers unopened. Complete acceptance or individual acceptance, please against bid. All data in approx. units of measure. Special price

test

test

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

Used Hess Gloria grinding machine in good condition Hess Gloria grinding machine 1999

turning diameter:300 mm turning height:300 mm total power requirement:70 kW weight of the machine ca.:11,5 t

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Electric AnschluÃ?wert0, 55 kW, 220/380 V, 3n, 50 Hz Pneuma k AnschluÃ?8 bar, 3/8 " AbsaugungStutzen diameter. 50 mm Mobile Hole from the front 1 pot drill D = 34 mm 2650 mm long approx. 1200 mm deep B.-Anl

No. 3701: 1 gebr. Vertical consol milling machine Fabr. HESSAPP, type HC 50 et, Bauj. 1981 with route control Heidenhain TNC 135 / Indramat Arb.-Ber.: 600 x 350 x 500 mm, drive power: 2.3 kW Accessories: Table area 1180 x 330 mm Other: Speed range 70 - 6000 rpm

Press length approx. 3000 mm Press height approx. 1800 mm 8 hand-hydraulic pressing units 2 Hold-down drive double-sided use mobile

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 630 mm : 10-25 mm/s : 300 mm/s : 750x625 mm : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm swing diameter: 250 mm turning height: 350 mm control: Siemens Sinumerik 840 D spindle diameter in front bearing: 100 mm feed range: 0,1 - 20000 mm/min rapid traverse: 20 m/min stroke of vertical slide: 300 mm spindle head DIN 55026 - Size: A 6 : 50 - 6500 1/min Speed range drive tool: 0 - 3000 1/min total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm swing diameter: 250 mm turning height: 350 mm control: Siemens Sinumerik 840 C spindle diameter in front bearing: 100 mm feed range: 0,1 - 20000 mm/min rapid traverse: 20 m/min stroke of vertical slide: 300 mm spindle head DIN 55026 - Size: A 6 : 50 - 6500 1/min Speed range drive tool: 0 - 3000 1/min total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 200 to : 1200 mm : 1000 mm : 250 mm : 180 mm : 35 1/min : 900x700 mm : 18,5 kW : 2400 mm : 1650 mm : 4000 mm : 18500 kg 8-fold ram guide light guard motorized ram adjustment hydraulic overload safety device motorized lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 300 to : 1200 mm : 1000 mm : 355 mm : 180 mm : 26 1/min : 1460x1090 mm : 22 kW : 2600 mm : 1950 mm : 4600 mm : 21500 kg 8-fold ram guide light guard motorized ram adjustment hydraulic overload safety device motorized lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 400 to : 1300 mm : 1100 mm : 340 mm : 200 mm : 26 1/min : 1100x1100 mm : 30 kW : 3850 mm : 1950 mm : 4350 mm : 23500 kg 8-fold ram guide light guard motorized ram adjustment hydraulic overload safety device motorized lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 765 mm : 10-20 mm/s : 250 mm/s : 1000x750 mm : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 685 mm : 10-20 mm/s : 250 mm/s : 850x640 mm : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1998 : 6068 : Türkei : 980 € : 1 : 350x32x2 mm : 170 mm : 145 mm : 200x120 mm : rund 110 mm, quadrat 120 : 0.75 kW : 1100 mm : 600 mm : 810 mm : 250 kg hyd. hack saw material supporting jack didn&apos,t according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 8266 : prompt, Zwischenverkauf v : Türkei : 69945 € : 1279.99 € : 1 : 1 : 175 to : 3050 mm : 3 (Y1, Y2, X) : 160 mm/s : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 10 mm/s : 100 mm/s : 650 mm : 250 mm/s : 140 mm/s : 250 mm : 900 mm : 104 mm : 18.5 kW : 4250 mm : 1800 mm : 2890 mm : 10520 kg 3 axes (Y1, Y2, X) CNC DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - direct programming of the bending angle - user friendly programming in dialogue form - graphic simulation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - manual, half and fully automatic work mode - tonnage calculation/programming by CNC - internal database - USB interfaces for backup and programm transportation servo motorized back gauge on linear gu ...

: neu : 8217 : prompt, Zwischenverkauf v : Türkei : 76324 € : 1396.73 € : 1 : 1 : 175 to : 3050 mm : Y1 / Y2 / X und R Achse : 160 mm/s : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 10 mm/s : 100 mm/s : 650 mm : 250 mm/s : 140 mm/s : 250 mm : 900 mm : 104 mm : 18.5 kW : 4250 mm : 1700 mm : 2750 mm : 10520 kg 4 axes (Y1, Y2, X, R) CNC DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - direct programming of the bending angle - user friendly programming in dialogue form - graphic simulation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - manual, half and fully automatic work mode - tonnage calculation/programming by CNC - internal database - USB interfaces for backup and programm transportation servo motorized back gauge ...

Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51000 € : 933.3 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4770 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MO ...