used HAFFNER KF

Lock case stemmer aggregate: yes;

Haffner Kettenfraese KF 412, 2.2 kW, as a stalker, with 16 chain; good condition

Chain cutter Haffner Type KF 20 Machine No. 16809 With door rest Engine strength 1.7 kW Weight 100 kg Dimensions 900 mm x 800 mm x H 1950 mm

Lock inlet machine Haffner SL 100 with pneymatic clamps L x W x H: 1000 x 700 x 2000 mm Built in 1989 Weight approx. 220 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Chain slotting machine with milling and drilling aggregate Make: Haffner Type: SL 402 Machine condition: used Hotel Area: Sucha Beskidzka Chiseling machine designed for fitting wooden doors .max. chiseling depth 150mm length length 20-455mm width length 4-40mm max.gr. material 80mm .max. drilling depth 65mm eccentric terminals main engine power 2,2kW/2800rpm. milling motor power 0,50kW/20000rpm. drilling engine power 0,50kW/2800rpm. weight 192kg

Used glass bead saw Int. Art. Ref. m3432 Manufacturer: HAFFNER Type GL 179 Year of manufacture: unknown Power approx. 0.5 kW Weight approx. 100 kg Item location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which w ...

Lock inlet machine Haffner SL 100 with pneymatic tensioners L x W x H: 1000 x 700 x 2000 mm Year of construction: 1989 Weight approx. 220 kg The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Haffner, Type: DGS 124, Bauyeshr : 1994, Pneumatical clamping system: yes, Sägeblätter schwenkbar bis ° : 45-90-45, Schnitthöhe max mm : ca.150, Schnittlänge max mm : 200, Schnittlänge max mm : 200, Power saw engine kW: 2,9, Width adjustment by engine: yes, Saw blade diameter max mm: 500, rotations controlled: 2800, Year :1994

Double end profiler, edge processing machine, scoring motor, hogger motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300W 17000 rpm -Voltage: 200V 300Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Panel saw, panel dividing saw, vertical panel circular saw machine, vertical panel saw -Handover: in the current condition as seen -Condition: the saw frame is welded, see pictures -Manufacturer: Haffner -Horizontal cutting length: 4400 mm -Vertical cutting length: 2100 mm -Diameter saw blade: 250 mm -Motor power: 2.2 kW -Transport height: 2550 mm -Space requirement: L5300/W1350/H3000 mm -Transport dimensions: 5300/1350/H2600 mm -Weight: 692 kg

Morticer Kit Engine 1.7 kW 1 x chain cutter 18 mm 1 x chain cutter 14 mm Chain bar 12-17 x 50 x 150 mm with handle and lock motor

Power supply 400V 2, 6kW Lubrication for chain of reservoir Jack drill Boring sheet metal machines WxDxH: 1100 x 680 x 2000 mm Weight approx. 300 kg

cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of pulley:6 St. pulley diameter:110x50x35 mm Feed speeds:8

technical details: - Stemming depth: max. 125 mm - Slot length: max. 170 mm - Chain width: max. 40 mm - Table longitudinal movement: 150 mm - Table transverse movement: 90 mm - Table rotation: 45° on both sides - automatic activation of the motor with anti-lock lock Engine data: - Power: 1.5 kW - Voltage: 380 V - Current: 5.3 A - Frequency: 50 Hz - Speed: 2,800 rpm Accessories: - 4 x milling chain 10 mm wide - 6 x milling chain 12 mm wide - 1 x milling chain 15 mm wide - 1 x sword 8 - 10 mm - 1 x Sword 12 - 14 mm - 1 x sword 18 - 20 mm - 2 x chain pinions 12 - 17 mm - 2 x chain pinions 18 - 20 mm - 1 x chain pinion 12 - 14 mm - 1 x chain pinion 10 mm Transport dimensions (H x W x D): 1,990 x 1,200 x 800 mm (on EURO pallet) Weight: approx. 80 kg The chain stemmer has been completely refurbished in our company and tested for its correct function. (Cha ...

Chain milling machine model SL 100 for lock box handle keyhole

Double mitre circular saw model DGS 182 cutting width 3200 mm

Number of milling agregates: 2 St. milling stroke vertical: x mm Profile height max.: x mm weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling agregates: 3 St. : 300 x 120 mm weight of the machine ca.: 140 kg Motor output: 1,5 kW Speed: 12000 U/min. stroke: 120 mm clamping range: 190 x 160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- technically efficient, ready to work - after full service - motor power: 2x 1.1 kW - disc diameter: 2x 250 mm, 2x 95 mm - pneumatic profile clamping

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm -Weight: 12kg

x-travel: 300 mm y-travel: 120 mm z-travel: 120 mm clamping range: 190 x 160 mm Required air-pressure: 6 bar distance spindle /table: 21,5 mm turning speeds: 12000 U/min total power requirement: 1,1 kW weight of the machine ca.: 95 kg dimensions of the machine ca.: 700x900x1600 mm Copy router BF 365 with automatic switching - Pneumatic clamping device - Automatic shifting - Centering device with scale - Milling area 300x120 mm - Stroke 120mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.