used HAENDLE WF

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drive, manual gap adjustment. In regularly maintained condition.

Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)

Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).

* General * SKU101Y726 * LocationBarneveld * MakeHändle * TypeEDR 21-A * No.PZ-3445 * Year of construction2000 * Main Features * Motor22 KW * Length1400 mm * Inlet diameter210 mm * Specified Features - Double screw extruder * MaterialStainless steel * Double screw extruders * Screw press(1x) * Double screwcheck * Screw diameter210mm * Screw length1400mm * Motor22,0 KW, 400/690 Volt * Speed± 43 Rpm * Inletdia. 245mm * With jacket(max. 6 bar) * Information * Floorspace3,6x0,9 M * Total height1,3 M * Weight2950 KG * Extra Specifications- Sieve plate housing is missing - Max. pressure 20 bar HaendleDouble screw extrudersBrand > HaendleExtruders > Double screw extruders What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

* General * SKU041H136 * LocationBarneveld * MakeHändle * TypeEDR 21-A * No.PZ-3444 * Year of construction2000 * Main Features * Motor22 KW * Length1400 mm * Inlet diameter210 mm * Specified Features - Double screw extruder * MaterialStainless steel * Double screw extruders * Screw press(1x) * Double screwcheck * Screw diameter210mm * Screw length1400mm * Shaft diameter100mm * Pitch250/140mm * Motor22,0 KW, 400/690 Volt * Speed± 43 Rpm * Inletdia. 245mm * With jacket(max. 6 bar) * Information * Floorspace3,6x0,9 M * Total height1,3 M * Weight2950 KG * Extra Specifications- Max. pressure 20 bar HaendleDouble screw extrudersBrand > HaendleExtruders > Double screw extruders What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

; NEW

Bellows for Mikron Fraesmaschine WF3 (WF3SA)X-axis The Baelge are with light optical maengels. Please specify for right or left side when ordering.

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drive, split adjustment manually. In a regularly maintained condition.

Bellows for Mikron Fraesmaschine WF41C, WF51C, WF61C, Z-axis; New

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling  ...

X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!

properties Used belt conveyor from the manufacturer Blume Fördertechnik Colour: Blue Incl. drum motor Incl. feet Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 4 pcs in stock Technical data: Total length: 4.055mm Total width incl. motor: 600mm Total width without motor: 460mm Belt width: 400mm Belt type: Smooth BDL drum motor Engine type: 11s KW0.3 m/s0.30 belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficient parts transport i ...

X 4000 Y 2500 Z 1500 W 800 Spindle diameter 130 mm kwW/Nm (S1) 4pinacles 2099 3000 U/Min. Table size 2000 x 2400 mm, maximum table load 20 t T-grooves 22H8 HH 640 HR 510 Movable cabin Z800 Y1800 Spindle support 250 mm ISO 50 Immediately available!

table diameter: 600x400 mm table height: x mm table load: x t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Pneumatic diaphragm pump manufactured by Wilden model P2

Used milling machine Internal machine number: m3302 Manufacturer MIKRON Type WF3 DCM Year of construction 1987 Tool holder ISO 40 Speeds 31.5 - 3,150 rpm X - 500 mm Y - 500 mm Z - 385 mm Weight approx. 2.1 t Total power approx. 8.7 kW Control Heiden hain TNC 155 With instructions + various tools Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this al ...

weight of the machine ca.: 5 t working width: max. 300 mm : 6 extensive accessories: viele Wechselräder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain turning speeds: 3150 U/min table surface area: 700x350 mm Table load: 400 kg spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.