used HABERMANN HPK

Habermann Pumps • Type HPK 150/450 Inlet 200mm, made of 150mm Cap.: 400-600 Kub/h Drive: Electric motor 90 kW • Type HPK 200/560 Infeed 250mm, made of 200mm Cap.: 450-800 Kub/h Drive: Electric motor 90 kW Both included: base and spare parts

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

Submersible pump, in steel vessel, Q= 10 m?/hr., H= 36-41 m, 1860-1980 rpm, 15,0-20,0 kW, with Seva electro motor, 30,0 kW

1 horizontal pump type HPK 200/560 Year built: 2008 Capacity: 550 m³/h Delivery head: 26 m Fl.S. Motor rating: 90 kW Pump speed: 810 upm Lining material: Hawiflex H 3807-01 Shaft sealing: mechanical seal Type of coupling: V-Belt Condition: used and repaired Extras: incl. motor

Water pump Sludge pump / excavator pump Manufacturer : Habermann Model : KB 250 S III The pump is revised and in perfect condition for more information see pictures. Internal number: 601 979

SAHINLER RING BENDING MACHINE TYPE 3R HPK 45 -Asdiameter 45mm -Bovenste wals wordt verplaatst hydraulically -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sahinler HPK-200 Profile Bending Machine Machine is in excellent condition Roll diameter : 200 mm Working speed : 2-5 mm Engine power : 30 KW

AYEL-TECH RING BENDING MACHINE TYPE HPK 50 -Asdiameter 50 mm -Bovenste wals wordt verplaatst hydraulically -Drie roll aangedreven -Digital uitlezing -Horizon eel/verticaal te sump -Voetbediening -Roll Opbergruimte voor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Version: - No waiting times during pressing by automatic control - To be operated by single person from the front - Two-hand operation on the side right Possible recyclables: - Cardboard - Foil - PET bottles - Foam - Cans - Electronic waste Technical Details: - Manufacturer: Strautmann - Type: PP 1207 - Bale format (LxWxH): 1200 x 700 x 800 mm - Bale weight: approx. 400 - 500 kg - External dimensions (LxWxH): 1844 x 1067 x 2868 mm - Transport height: 1970 mm - Filling opening: 1145 x 430 mm - Pressing pressure: 580 kN - Throughput power: 1 - 2 bales / hrs - Number of connective wires: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: inside / outside covered - Noise level: below 80 dB(A) - Built 2001 - 2002

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

SAHINLER RING BENDING MACHINE TYPE HPK 60 - Asdiameter 60 mm - Bovenste wals wordt hydraulicver - Drie roll aangedreven - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Opbergruimte voor roll - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

ISITAN RING BENDING MACHINE TYPE 3R HPK 45 - Asdiameter 45 mm - Bovenste wals wordt hydraulicver - Digital uitlezing - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

SAHINLER RING BENDING MACHINE TYPE HPK 50 - Asdiameter 50 mm - Bovenste wals wordt hydraulicver - Drie roll aangedreven - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Opbergruimte voor roll - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51000 € : 933.3 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4770 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MO ...

TUGRA RING BENDING MACHINE TYPE HPK 41 - Asdiameter 40 mm - Bovenste wals wordt hydraulicver - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16500 € : 308.55 € : 80 mm : 260 mm : 3 : 7.5 kW : 6 m/min : 80x15 mm / 800 mm, 40x10 : 125x25 mm / 600 mm, 60x8 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 600 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.400 mm, 40 : 80x80x8 mm / 800 mm, 40x4 : 80x80x8 mm / 1.000 mm, 40 : UPN 120 / 800 mm : UPN 120 / 800 mm : IPN 120 / 800 mm : 1150 mm : 1200 mm : 1300 mm : 1600 kg 3 motor driven rolls strong welded steel construction upper roll hydr. adjustable seperate control panel with digital readout horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MODEL HPK 180 DP NC Shaft diameters Ømm 180 Rolls Diameter Ømm 580 Working speed m/min 3-6 Motor power kW 30 Length mm 2760 Width mm 2310 Height mm 2680 Weight kg 14400

- Upper/closing pressing force: 30 t - Upper/closing retraction force: 15 t - Upper/closing stroke max.: 300 mm - Under/spray piston pressing force: 11 t - Under/spray piston retraction force: 5.2 t - Under/Spray piston stroke max: 150 mm

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 263.16 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 22500 € : 459 € : 80 mm : 200 mm : 2 : 3 kW : 8 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15x : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : 80 / 600 mm, UPN 30 / 250 : 65 / 600 mm, UPN 30 / 250 : 80 / 600 mm : 1200 mm : 1100 mm : 800 mm : 1400 kg 4 roll machine 2 hydraulic driven rolls strong welded steel construction bottom and lateral rollshydr. adjustable seperate control panel with digital readout horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12000 € : 244.8 € : 35 mm : 137 mm : 137 mm : 3 : 1.1 kW : 7 m/min : 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm : 500 mm : 1250 mm : 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9500 € : 195.7 € : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 38000 € : 767.6 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...