used GARDNER DENVER BH

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Gardner Denver ELMO, side channel compressor from digicolor DFU 130 central suction unit -Type: G-BH1 2BH1500-7AH16 -Drive: 1.3 / 1.5 /2.1 kW at 50 / 60 / 87 Hz -Speed: 2800 / 3315 / 5000 rpm -Number. 2x blowers available -Price per piece -Dimensions: 455/380/H410 mm -Weight: 31kg/pc.

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 6684 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 883 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

#4444 - VACUUM PUMP GARDNER DENVER Manafacture: Gardner Denver Power: 7.5 kW; 8.8 A; 350 mbar

Gardner Denver Gas Booster. Hours: 0 Year: 2014 Includes Danfoss Frequency Regulator Lovely Little Unit.

Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty

Gardner Denver/Rietschle Claw vacuum pump VLR 300 complete with 5.5 KW AC-motor, 300 m3/h, max. vacuum: - 50 mbar, continuous operation: - 150 mbar, overhauled with all wearing parts, 1 year warranty

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

Gardner Denver/Rietschle Claw vacuum pump VLR 500 with 9.0 KW AC-motor, 500 m3/h, final pressure: - 750 mbar, completely overhauled with all wearing parts, 1 year warranty

Manufacturer: GARDNER DENVER #3289 Type: G200 2 BH 1900 -7AH17 Electric power: 12.5 kW RPM: 2920/minute at 50Hz Pmin: 280 mbar

PROD. GARDNER DENVER TYP ES75-13 EANA S/N 19030150M YEAR 2003 POWER (kW) 75 EFICIENCY (m3/min) 8,86 PRESSURE(bar) 13

Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h -Drive: 3 kW -Total dimensions: 710/400/H290 mm -Weight: 92 kg

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

feed pressure: 10 bar liter capacity: 3,14 m3/min total power requirement: 25,3 kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 0,9 x 1,1 x 1,45 m compact screw compressor -frequency controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 3,14 m3/min total power requirement: 25,3 kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 0,9 x 1,1 x 1,45 m compact screw compressor -frequency controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gardner 800l ribbon blender 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph

* General * SKUR1089 * LocationBarneveld * MakeKek-Gardner (UK) * TypeCM 680 * No.CM680 B45378/2 * Year of construction2009 * Main Features * MaterialStainless steel * Motor18.5 KW * Specified Features - Sieve granulator * Granulating sievecheck * Conical granulating sievecheck * Rotor sizesdia. 660x190mm * Sieve sizesdia. 660x180mm * Sieve perforationdia. 3mm * Inletdia. 250mm * Outletdia. 300mm * Motor18.5 kW 400/690 Volt (Ex) * Speed326 rpm * With extra sieves(1) dia. 3mm * MaterialStainless steel * Information * Total height2,1 M * Weight1300 Kg * Floor space2,8x1,3 M * ATEX compatiblecheck * Extra SpecificationsUsed for dry milling 120 Kg/h including TBMA rotating valve DN 150 * Extra information * This Kek Gardner Sieve granulator is a rich conical milling solution with a low energy size reduction process ideal for fatty, heat-sensitive, sticky, moist or otherwise difficult to grin ...

* General * SKUR1090 * LocationBarneveld * MakeKek Gardner (UK) * TypeCM680 * No.CM680 B45378/1 * Year of construction2009 * Main Features * MaterialStainless steel * Motor18.5 KW * Specified Features - Sieve granulator * Granulating sievecheck * Conical granulating sievecheck * Rotor sizesdia. 660x190mm * Sieve sizesdia. 660x180mm * Sieve perforation5x5mm * Inletdia. 250mm * Outletdia 300mm * Motor18.5 kW 400/690 Volt * Speed326 rpm * With extra sieves(1x) 5x5mm * Information * Total height1,8 M * Weight1200 Kg * Floor space2,0x1,3 M * Extra SpecificationsUsed for wet milling 300 Kg/h Including a TBMA Europe rotating valve type H-AR-150-1 Kek GardnerSieve granulatorsBrand > Kek GardnerSieves > Sieve granulators What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

DENVER model CNC-180 Spindle drive type inverter vari Tischabmasse 1473 X 318 mm (58 "X 12, 5") T-slots (no X width X Division) mm 3 x 16 x 80P Table column 55 x 440 mm (2.17 "x 17,32") XYZ-axis travel capacity 820 x 390 x 410 mm (32,28 "x 15.35" x 16, 14 "") Quill stroke 85 mm (3.35 "") Spindle spindle taper 4200 mm spindle speed NT 40 Spring diameter mm 105 (4.13 "") Swivel angle of the spindle to 45 ° Spindle nose to table surface mm 100 ~ 400 (3.94 "~ 15.75") Spindle Center to column 165 mm ~ 650 (6.5 "~ 25.6") Speed Quillenzufuhrgeschwindigkeit m / min 3 m / min Feed speed of the XY-axis m / mni 4 m / min Z axis feed m / min 3 m / min Motor spindle motor HP 5HP (3.75 kW) XY-axis motor KW 0,85 kW W-axis motor KW 0,4 kW Z axis motor HP 0.375 kW ( ...

DL-660 / 760 / 840 1000 1500 CAPA city swing over bed 660 (26 ') / 760 (29.92 ") / 840 (33") Swing over cross slide 400 (15.75 ") / 500 (19.69") / 580 (22.84 ") Distance between Center 1000 (39.37 ") 1500 (59.06") Width of bed 420 (16.54 ") Length of bed 2640 (103.94 ") 3140 (123.62") Bed way of carriage 1 mountain way + 1 box way Bed way of cross slide dovetail slide way Headstock spindle bore 105 (4.13 ") Spindle nose A2-8 Range of spindle speed 20-1300 RPM * It changed by different horsepower of motor. Lol of 4 steps spindle speed Travel X-axis travel (cross slide travel) 330(13") / 380 (14.96") / 420 (16.54 ") by manual 4-way tool post Z-axis travel (longitudinal travel) 1000 (39.37 ") 1500 (59.06") * It changed by different turretã??chuck or tailstock. X-axis ball screw diameter  ...

Item / model width of bed 24 "(610) DHL-960, 1120, 1220, 1320, 1420 1500 2000 3000 Capacity maximum swing over bed 960 (37.8 ") 1120 (44 ") 1220 (48 ") 1320 (51.97 ") 1420 (55.91 ") Center height 480 (18.9 ") 560 (22 ") 610 (24 ") 660 (25.98 ") 710 (27.95 ") Swing over cross slide 600 (23.6 ") 760 (29.92 ") 860 (33.86 ') 960 (37.8 ") 1060 (41.73 ") Z axis travel 1500 (59 ') 2000 (78.74 ") 3000 (118.11") * Z-axis travel changed by different turret, chuck or tailstock. Distance between centres 1500 (59 ") 2000 (78.74 ") 3000 (118.11 ") Length of bed-3450 (135.83 ") 3950 (155.51 ") 4950 (194.88 ") Width of bed 610 (24 ') Headstock spindle bore ø152 (6 ') OP: ø230 (9 ') OP: ø255 (10 ') OP: Ã& ...

TEM / model width of bed 32 "(810) DHK-960, 1120, 1220, 1320, 1420, 1520, 1620 1500 2000 3000 Capacity maximum swing over bed 960 (37.8 ") 1120 (44") 1220 (48 ") 1320(51.97") 1420 (55.91 ") 1520 (59.84") 1620(63.78") Center height 480 (18.9 ") 560 (22") 610 (24 ") 660 (25.98") 710 (27.95 ") 760 (29.92") 810(31.89") Swing over cross slide 550 (21.65 ") 710 (27.95") 810 (31.89 ") 910 (35.83) 1010 (39.76") 1110 (43.7 ") 1210 (47.64") Z axis travel 1500 (59 ') 2000 (78.74 ") 3000 (118.11") * Z-axis travel changed by different turret, chuck or tailstock. Distance between centres 1500 (59 ') 2000 (78.74 ") 3000 (118.11") Length of bed 3960 (155.91 ") 4460 (175.6") 5460 (215 ") Width of bed 810mm (31.88 ") Headstock spindle bore Ã&ced ...

DENVER model CNC-1050 Spindle drive type inverter vari Tischabmasse 1520 x 430 (59,84 "x 16,93") T-slots (number X width x distance) 3 x 16 x 80P Cloumn table surface 80 ~ 550 (3.15 "~ 21,65") Stroke of the XYZ axis 1050 x 500 x 500 (41.34 "x 19,69" x 19,69 "") Coils run 140 (5.51 "") Spindle spindle taper NT-40 Spindle speed 3600 RPM Shaft diameter 110 (4.33 "") Spindle nose to table 70 ~ 670 (2.76 "~ 26.38") Spindle Center to table surface 515 (20,28 "") Motor spindle motor 7,5 kw (5 HP) XY axis motor 0,85 kW Z axis motor 0,6375 (0.85 kW) Coolant motor 1/8 HP Measuring machine size 2230 x 2000 x 2200 (88 "x 79" x 87 "") Packaging size 2500 x 2100 x 2500 (95 "x 83" x 100 "") N.W. / G.W.. 3200/3400 kg Standard colour RAL 7035 light grey + blue RA ...

DENVER model MCV-1000 Tischabmasse 1520 x 430 (59,84 "x 16,93") T-slots (number X width x distance) 3 x 16 x 100 p Travel in XYZ axis 1000 x 550 x 500 (39,37 "x 21,65" x 19,69 "") Spindle nose to table surface 120-670 (4.72 "-26.38") Spindle Center to the supporting surface 165-580 (6.5 "-22,83") Spindle spindle taper BT-40 Spindle speed 8000 U / min Cutting feeds 3000 ~ 5000 mm (max) Rapid response feeds 5000-7000 mm (max) Motor spindle motor 7,5 kW XYZ-axis motor 1 kW Coolant motor 1/4 HP Maschinenabmasse 2500 x 2000 x 2300 (99 "x 79" x 91 "") N.W. / G.W.. 3200/3400 kg Standard colour RAL 7035 light grey + blue RAL 5015

Item / model DM-4V DM 4VS DM-5V DM 5VS Type of spindle drive pulley Tischabmasse 1520 x 430 (59,84 "X 16, 93 ') T-slots (number X width x distance) 3x80P Spindle nose am table top 80-550 (3.15 "X 21,65") Capacity X Y Z axes travel 1000 x 500 x 550 (39,37 "X 19,69" X 21,65 "") Quill stroke 150 (5.9 "") 140 (5.51 ") Spindle spindle taper NT-40 Spindle speed (RPM) 50 Hz: 3600 60 Hz: 3900 3600 50 Hz: 3000 60 Hz: 3600 and 3600 Shaft diameter 105 mm (4.13 "") 110 mm (4.33 ") Spindle swivel angle 45 ° Spindle nose to table surface 70-670 (2.76 "-26.38") Spindle Center to coloumn 515 (20,28 "") Feed speed of the Quill 0.04 0.08 0.15 mm / 0.035 / 0.07 / 0.14 mm / revolution XY-axis feed 28-1260 mm / min Z axis feed speed 17-788 mm / min Motor spindle motor 5th XY-axis motor 1HP Z ax ...