GERMANPLAST used machine for sale

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 11

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...

This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line

Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5

GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual

Drying, blending, degassing, agglomerating system for plastic materials and more Automatic process. No operator needed. Italian technology and material quality standards. Used machine reconditioned Very versatile, can be used for a variety of applications: PAPERMILL PULPER, MIXED PLASTICS, but also ORGANIC MATERIALS to be dried and compacted, PEAT SUBSTITUTE, etc. Output is a continuous stream High ROI Installed power 400 kw – average power consumption 260 kw/h Low maintenance costs Ideal for 24/7 shifts On this link you’ll see the machine connected to an extruder: https://youtu.be/Q3Ayg62mfh8

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover,  ...

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](https://www.germanplast.eu/listings/4115725-drying-system-for- vertical-mixers)

CONVEYOR BELTS, with METAL DETECTORS or OVERBELT METAL SEPARATORS, top quality and sustainable prices, Size and characteristics bespoke to the project., Ask for more information

Hydraulic Gripper

GUILLOTINE REEL SPLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](https://www.germanplast.eu/listings/4115633-guillotine-reel-s litter) for full description., Force: 50 T

Starting product : car and truck tyres (excluding forklift and loaders tyres) max diam. 1.200 mm, (larger tyres need pre splitting), Final product : 2-4 mm.crumbs, 1-2 mm.crumbs, 2 operators per shift, calculated on a 220 days/year 8 h/day = 1.760 T/year - 16 h/day = 3.520 T/year, Required space : about 25 x 15 mt., Harmonized steel as a residual product., Average throughput rate of granulate : 1 Ton/h (throughput rate depends on feeding rate and on the kind of tires), installed power : about 380 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - manual (20-25 tyres/h) for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.300 mm wide, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, High speed granulator 1.300 mm wide rotor, extraction belt, vibrating table, Overbelt magnetic  ...

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 4 operators per shift, required space : about 45 x 25 mt., calculated on a 220 days/year 8 h/day = 7.040 T/year - 16 h/day = 14.080 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 4Ton/h in input, (throughput rate depends on feeding rate and on the kind of tires), installed power : about 900 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, n.2 ...