used FREY Konti

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

We sell here a vacuum filler from the manufacturer Frey, type Konti C50 in a very good used and functional condition. The sausage filler runs on 400 volts, built in 2000 GÜ, completely stainless steel, hopper divisible, LCD control, for filling, portioning and unscrewing, workshop tested, ready for immediate use, dimensions W/D/H 80/70/160 cm, others on request.

Used vacuum filler FREY, type: Konti A50 - good condition More information on request.

We sell here a vacuum filler from the manufacturer Frey, type KA 50 in a very good used and functional condition. The machine runs on 400 volts, 3.0 kW, completely stainless steel, with holding device, casing applicator, cornucopia, LCD control, workshop tested, immediately ready for use, dimensions W/D/H 70/70/160 cm, others on request.

Frey vacuum filling machine, type: Konti-A50, machine number: KA800221833, 400 V, 50 Hz, 3.0 kW, dimensions: 650 mm x 750 mm x 1620 mm.

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Piston Filling Machine / Sausage Filling Machine / Piston Filler Manufacturer: FREY Type: KOMPAKTA 2-30 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and turning off all intestinal types. Particularly fry-friendly filling with a clear filling pattern. Equipment: 30 litre filling volume Machine solid stainless steel Speed, speed and pause length infinitely selectable Level indicator, piece counter, quantity shutdown Serving Addition 1st Serving Portioning range 5 - 10,000 g Portioning speed up to 250 servings/min. Filling cylinder with approx. 30 litre capacity solid stainless steel with sliding surface Piston made of high-quality, wear-resistant plastic Power supply 3.70 kW Three-phase current 400 volts, 50 Hz, 3 phases LCD3 control with TFT color displa ...

Hydraulic Filler/Piston Filler/Sausage Filler Year of construction 2017 Filling volume 30l with digital LCD control Portioning range 5 - 10,000 g Portioning speed up to 250 servings/min with intestinal holding device incl. various filling tubes completely stainless steel

Frey OSCAR 20 piston filler used Machine is built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (housing, cylinder, piston and cover) and is in the condition returned by the customer, so it must be thoroughly cleaned before use. Video about test run available

Product number: 2571 Type: Kompakta 2-30 Serial number: K230L13136186 Year of construction: 2016 Filling cilinder: 30 litres Portioning range: 5 - 10000 g Portioning speed: up to 250 portions/min. Filling pressure: max 12 Bar Power: 3 x 400V, 50Hz, 3.7kW Dimensions: 750 x 650 x 1300 mm Weight: 340 kg Filling, portioning and linking

Multi-wire brick cutter Freymatic multicut Year of production - 1996, rail length - 1340mm, cutting speed - 11 cycles per minute

universal brick cutter Freymatic AM – 600

universal brick cutter Freymatic AM – 400

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: FZR/220 AC/1 -0.05 s-1s -Price: per piece -Number: 5x available -Weight: 0.2 kg

Product number: 2801 Type: Kompakta 2-30 Serial number: K230C10136457 Year of construction: 2017 Content: 30 litres Power: 3 x 400V, 50Hz, 3.7kW Dimensions: 770 x 930 x 1250 mm Weight: 350 kg For filling, portioning and linking With casing holder

Type: Kompakta 2-30 Serial number: K230L1373624 Year of construction: 2016 Power: 3 x 400 V, 50 Hz, 3.7 kW Hopper capacity: 30 liter Portioning range: 5 – 10000 g Portioning speed: up to 250 portions/min. Filling horns: 37 mm, 27 mm, 12 mm, Dimensions: 833 x 767 x 1240 mm For filling, portioning and linking

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Manufacturer: PAAL Type: Accounts 125 Year of construction: 1991 Technical data: Pressing force with up to 265 bar: 400 kN, 40 t Filler: approx. 92 x 125 cm Capacity at approximately 265 bar under Operating conditions: approx. 180 m³/h idle: approx. 220 m³/h Throughput rates at: -35 kg/m³ - department store approx. 5,8 t / h -60 kg/m³ - mixed paper approximately 10 t / h -100 kg/m³ - collected about 15 t / h Press power requirement: 30 kW Wire train: 4 kW Transposition: 3 kW Wirbulator 7.5 kW Total power: 50 kW / 100 A Channel cross section: 70 x 100 cm Bale dimensions: approx. 70 x 100 x adjustable cm Bale weight: up to approx. 450 kg depending on the pressed product and Bale length Operating voltage 400 V / 3 / N / PE / 50 Hz The press dimensions: L x W x H = 7.908 x 1,778 x 3.625 mm Weight of the press until: 12 tons depending on equipment Pai ...

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

Heavy industrial high-performance chiller for the production of slats for glulam and cross laminated timber (vertical zincing) Highlights input: up to 15 different length boards per minute - Inside: milling on both sides, glue application and up to 200 kN pressing force - Output: up to 90m/min production speed (endless strand with vertical zinc) Still in operation at Mayr Melnhof Holz Gaishorn GmbH / Gaishorn am See 182 / 8783 Gaishorn / Austria Available: End of 2022 Visit possible on request. Detailed technical description in the PDF document (as an attachment in the photo gallery).

Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour

Machine type: Baler Manufacturer: HSM Pressen GmbH Type: AKA 14 Kontinuo Pressing power 140 kN Loading aperture width 650 mm Press chamber width 700 mm Bale length 300 - 700 mm Bale width 700 mm Bale height 600 mm Bale weight (max.) 80 - 120 (700mm) kg Number of strappings 3 Driving power 7.5 kW Voltage 400 V Frequency 50 Hz Width 970 mm Height 1940 mm Weight 1500 kg