used FLENDER HIMMEL ZF

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 25 mm -Protection class: IP 55 -Number: 3x motors available -Price per piece -Dimensions: 335/175/H160 mm -Weight: 11.6 kg

Gear motor, electric motor, stop motor, drive motor, electric gear motor, three-phase motor -comes from a Homag double-sided edge banding machine -Power: 0.18/3 kW -Speed: 7/320 rpm -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24 volt coupling -Number: 2x gear motors available -Price: per piece -Dimensions: 650/320/H230 mm -Weight: 35 kg

Gearbox Flender Himmel KH80K-IEC71 Reduction ratio 96 / 15 ø output shaft 50 mm L x W x H: 50 x 25 x 35 cm Weight approx. 130 kg Year of construction 1992 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Geared motor, electric motor, electric geared motor, angular geared motor, automatic band saw -Manufacturer: Flender Himmel, geared motor -Gearbox: Type ZF 10 i= 18.064 -Speed: 78 rpm -Engine: ERY 0.18/4-7 1390 rpm -Shaft: Ø 20 x 50 mm -Dimensions: 380/200/H210 mm -Weight: 11.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50/60 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 255/155/H155 mm -Weight: 8 kg

Gear motor, electric motor, stop motor, drive motor, electric driven motor -comes from a Homag double-sided edge banding machine -Power: 0.18/3 kW -Speed: 64/77/320/384 rpm -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24 volt coupling -Dimensions: 620/350/H200 mm -Weight: 41 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 137 rpm -Power: 0.37 kW -Construction: angle hollow shaft -Diameter shaft: Ø 19 mm -Protection class: IP54 -Dimensions: 290/140/H200 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 2x motors available -Price: per piece -Dimensions: 250/160/H150 mm -Weight: 6.5 kg

Three-phase motor, electric motor -Power: 0.18kW -Speed: 2790 rpm -Shaft: Ø 15 mm -Type: B5 -Protection class: IP 54 -Weight: 7kg

Gear motor, electric motor, electric gear motor, gear motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 40 kg

Gear motor, electric motor, electric gear motor, gear motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 40 kg

Gear motor, electric motor, electric gear motor -Speed: 25.5/51 rpm -Power: 0.3/0.45 kW -Shaft: Ø 25 x 60 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 395/168/H190 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 25.5/51 rpm -Power: 0.3/0.45 kW -Shaft: Ø 25 x 60 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 395/168/H190 mm -Weight: 19 kg

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Parallel shaft gear with e-drive 30 kW (e.g. for use with a ball mill), motor shaft diameter 45 mm, N1 = 1.450 RPM, N2 = 14,5 RPM, drive shaft diameter 130 mm, with electrical brake, clutch with counter disc 600 mm diameter. Oil 190 CSX/50°C - Wa-No. 369226. Complete on base frame.

Worm gearbox with motor - FLENDER CEUA320 - see pictures

Conveyor belt incl control (speed control) Tread Length 105cm Width 20cm Height

length: 720 mm width: 500 mm height: 600 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1200x640x600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 720 mm width: 500 mm height: 700 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1200x640x700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flender drive gearbox from a tunnelling conveyor belt mill Gearbox, output speed approx. 44 rpm (1.5 m/s with drum diameter 630mm) Drive motor 75 kW Turbo clutch

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives !!! available Very good condition, straight from production!!!

Electric motor Flender ATB-Loher ANGA-315LB-42P 142/172 kW -unused - Electric motor Loher Flender - Model: ANGA-315LB-42P - 142 / 172 kW - 1480 / 2980 / min - 50 Hz - 1.21 t

* General * SKU040G131 * LocationBarneveld * MakeFlender Drives & Automation * TypeFZA F88B-K4 (132) * No.8718825/1 * Year of construction2007, Drive unit has never been used * Main Features * Motor5.5 KW * Specified Features - Stirrer * StirrerDrive unit for reactor/stirring vessel (1x) * Flange-stirrer(flange ± dia. 440mm) * Without mixing shaftcheck * Motor5,5 KW, 400/690 Volt (Atex) * Speed mixing shaft± 187 Rpm * With mechanical sealcheck * Information * Floorspace0,6x0,5 M * Total height1,7 M * Weight450 KGFlender DrivesStirrersBrand > Flender DrivesMixers > Stirrers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Gear motor FLENDER MI70FBR20/1 B14 1,5/4 ( MI70FBR20/1B141,5/4 ) 1,5 kW 70 rpm 230 / 400 V IP55 Shaft: Ø 28 mm Flange: Ø 160 mm used, tested ! Dimensions: 470 x 280 x 220 mm