used FEINTOOL HFA

CONTROLS   PLC BECKHOFF PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 400 to   stroke: 80 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 3 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s   return force: 200 to COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 810 mm   lower table (front-back): 1050 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm LEVELLER UNIT   sheet width max: 300 mm   sheet width (min): 0.5 mm  &n ...

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 450 mm   sheet thickness max: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed (max): 48 m/min    ...

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Slide pressure: 80 to Total capacity: 800 kN Tool clamping surface: superior: length: 420 mm Width: 420 mm inferior: length: 420 mm Width: 420 mm Die stroke from: 0 mm up to: 90 mm Number of strokes: stepless from: 30 s/min up to: 120 s/min Tool height: from: 150 mm up to: 250 mm Band width: 90 mm Maximum thickness of material: 3 mm Voltage 50 Hz 3x: 380 Volt Main motor: 5.5 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 2970 mm Width: 1665 mm Height: 2420 mm Various accessories: Forward feed device Workpiece counter

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

CONTROLS   PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN   drive system: servomechanic SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 625 to   stroke: 25 mm V-RING   nominal force: 1250 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 380 mm   ram adjustment: 125 mm STRIP-FEEDER   sheet width max: 250 mm   sheet thickness max: 10 mm   feeding step min.: 0.1 mm   feeding step max.: 300 mm   sheet length min: 2500 mm CROP SHEAR   stroke rate (max.): 20 /min  &nbs ...

CONTROLS   PLC OMRON PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   shut height max.: 277 mm   ram adjustment: 80 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 210 mm   sheet thickness max: 6 mm   nominal force: 6 kN   measuring wheel: no   band lubrication system: optional   band support rolls: yes DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requirement ...

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 180 mm   sheet thickness max: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional

CONTROLS   electronic controls SLIDE   total force (nominal): 40 to TOOL DIMENSIONS   lower table (left-right): 280 mm   lower table (front-back): 280 mm   upper table (left-right): 280 mm   upper table (front-back): 280 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max: 100 mm   sheet thickness max: 4 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1840 mm   total height: 1350 mm   total weight approx.: 2500 kg

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: link drive   feedstock transport direction: left to right SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 22 to   stroke: 8 mm V-RING   nominal force: 25 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 220 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max: 180 mm   sheet thickness max: 5 mm   ...

PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: right to left SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 22 to V-RING   nominal force: 25 to TOOL DIMENSIONS   lower table (left-right): 430 mm   lower table (front-back): 490 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 230 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max: 180 mm   sheet thickness max: 5 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 180 mm   ...

CONTROLS   PLC PNEUTRONIC SLIDE   total force (nominal): 160 to   ram adjustment: 80 mm   stroke: 60 mm   stroke rate (min.): 20 /min   stroke rate (max.): 70 /min   main drive power: 11 kW V-RING   nominal force: 40 to   stroke: 14 mm COUNTER RAM   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 210 mm   sheet thickness max: 6 mm   feeding st ...

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

CONTROLS   PLC HARDMEIER CONTROL PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 100 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 37 to V-RING   nominal force: 27 to TOOL DIMENSIONS   lower table (left-right): 430 mm   lower table (front-back): 480 mm   upper table (left-right): 430 mm   upper table (front-back): 480 mm   shut height max.: 255 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2970 mm   space requirements -front/back-: 1675 mm   total height: 2420 mm   total weight approx.: 6200 kg

CONTROLS   PLC BECKHOFF PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 67 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 125 to V-RING   nominal force: 125 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 560 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 250 mm   sheet thickness max: 10 mm   feeding step max.: 999 ...

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional !! very well maintained mac ...

CONTROLS   PLC BECKHOFF SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 70 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 22 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max: 200 mm   sheet thickness max: 5 mm   feeding step min.: 0 mm   feeding step max.: 999 mm   pilot release system: yes   measuring wheel: optional ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS -FINEBLANKING PRESS-   waste cutter: yes ...

MAX CAPASITY 80 T

pressure: 25 t plate thickness: 4 mm no. of strokes: 60-160 Hub/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SMG / Feintool Type: HFA 6300 Year of construction: 1988 Total force: 4000-6300 kN Ring serrated force: 320-3200 kN Counter holding force: 130-1300 kN Safety distance: 153 mm Trailing distance max. 10 mm Closing speed: 120 mm/s Plunger stroke beu max tool height: min.-max. 30-150 mm Tool clamping surface at the top: 900 x 900 mm Tool clamping area at the bottom: 910 x 1350 mm Tool installation height max: 410 mm Tool installation height min: 330 mm Main drive: 90 kW Total connected load: approx. 120 kW Weight of the press: approx. 31 t

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

SCM Olimpic K201 HFA Year 2003 SN AH/107773 Working thickness 8-40mm Ribbon edge thickness 0.4-3mm Thickness of the wrapped edge 0.4-1.2 mm single-motor end cutting unit ( 12,000 rpm ) Edge milling unit for hot melt adhesive in granulate form, which is applied with a roller Cutter for collided edges max. thickness 1.2 mm 2 edge pressure rollers Feed speed 8 meters/minute Suction nozzle 3 1/8" Pneumatic smatics 6 bar Dimensions 2080 x 1195 x 1400 mm Voltage 220 Phase CE marked

1 steam turbine for power generation from a wood chip steam production plant Manufacturer: Kuhnle,Kopp+Rausch Manufacturing No. 4-339 002 Type: HFA 30B Power 263 kW Year of construction 2006 Speed 18036 Live steam: 19.8 to 27 bar Exhaust steam 1.5 to 4.5 bar Quick shutdown: 203.8m-1 The system was dismantled by us in 2018 and put into stock. 1 steam turbine for electric power generation of a wood chip steam production plant Manufacturer: Kuhnle, Kopp+Rausch Manufacturing No. 4-339 002 Type: HFA 30B Power 263kW Year of construction 2006 RPM 18036 Live steam: 19.8 to 27 bar Exhaust steam 1.5 to 4.5 bar Rapid shutdown: 203.8 m-1 The system was dismantled by us in 2018 and placed in stock.