working width 2040 mm sheet thickness at 40 kp/mm² 4 mm Manual backgauge up to 600 mm Connected load 7.6 kW Machine weight approx. 3 t Dimensions L/W/H approx. 3.3 m / 1.4 m / 1.8 m Accessories: Bending tool with radii 3 mm, 6 mm, 7.5 mm, 10 mm
Motorized three-roll bending machine Fasti 2040x2mm Roller diameter approx. 105mm sheet thickness over the entire length 2mm Foot switch GS identifier Hndxqcbkg Dimensions: LxWxH approx. 3x1x1.2 meters Weight approx. 1300Kg
Fasti 2040 x 3 mm Max worklength: 2040 mm Max tickness: 3 mm Distance between clampblock -- ram: 80 mm Eletric motor (power): 2,2 kW Weight: 2460 kg
sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm ** good condition (!!) ** Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech ...
sheet width: 2040 mm plate thickness: 2,0 mm daylight opening: mm distance between columns: 2100 mm work height max.: mm : max. 135 Grad total power requirement: 1,5 kW weight of the machine ca.: 1,7 t range L-W-H: 2,9 x 1,0 x 1,7 m Furnishing: - Bending angle preselection - Segmented tool - additional bending set - manual backgauge - Dokumentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC hydraulic - bending machines, second-hand CNC - hydraulic folding machine, used FAB. / make: FASTI Model: 215/20/6 Control / control: FASTIMATIC CNC 4000 Performance: / sheet thickn.: max. 7mm (3000 N / mm2) at nominal working width Performance: / sheet thickn.: max. 6mm (4000 N / mm2) at nominal working width Maximum sheet thickness /. Max sheet thickn. 9.5 mm width / operation length: 2040 mm Lift of the upper cheek / vertical travel upper beam: 500 mm Adjustment of the lower Beam / adjustment below beam: 80 mm Weight / weight: 6.8 to Engine output (connected load: 7,5 kW) Specification / specifications: Double footswitch / feet double switch incl. tool set / incl. set of bending tools CNC - controlled Backgauge / CNC back stop
CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...
Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg
Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V
sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this ...
sheet width: 1620 mm plate thickness: 3,0 mm distance between columns: 1700 mm daylight opening: 350 mm adjustment: UW 80 mm pivoting angle: 180 Grad total power requirement: 2,2 / 1,5 kW weight: 1.740 kg range L-W-H: 2.713 x 1.200 x 1.500 mm Furnishing: - electric / motorized swivel bending machine - Drive of the upper and bending beam - FASTI PLC control model FM 5 * 5.7 LCD touch screen display * Numerical input via membrane keyboard * Memory size for 20 programs with 20 steps each - swiveling control panel - manual backgauge - manual lower beam adjustment - Double foot switch - Operation manual - 2x front fenders * Replacement bending rails (upper tool) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: working width 1540 mm - material thickness at 40 kg / mm² strength 6 mm - Bending angle setting electronically preselectable 0 - 135 ° - largest opening width / stroke of the upper cheek 200 mm - Height adjustability - the bending cheek 100 mm - the lower cheek 100 mm - Upper cheek drive 400 V / 2 kW - Bending cheek drive 400 V / 7 kW - E.- Foot switch - Space requirement approx. W 2400 x H 1650 x D 1100 mm - Weight approx. 4000 kg
Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch
sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg