FACCIN used machine for sale

Technical data of the Faccin HAV 3162 hydraulic plate calender used: Upper roller diameter: 620 mm Diameter of side rollers: 550 mm Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

-Plate rolling machine rubber urethane pinch roll 1-one-pass rolling with pre-bending -Plate sheet width max. 3000 mm -Plate thickness 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. -Console electric manual/automatic work sequence with digital readout. - EQUIPMENT INSTALLED WITH THE MACHINE -Vacuum cups lifter plate width 3000 mm -Automatic feed pusher plate sheet loader into the rolls- -Side support hydraulic operated with conveyor belts motorized cradle system, all parts rubber coated to protect the plate surface from scratches.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

roll surface width: 3000 mm length: 5000 mm width: 2000 mm height: 2100 mm side roll diameter: 300 mm material strength at pre-bending: 18 mm : 3 Bending speed: 0-5 °/sec output: 20 kw weight of the machine ca.: ca. 13000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverter weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm

sheet width: 2100 mm plate thickness: 3,5 mm pre-bending: 2,5 total power requirement: 3,8 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,9 x 0,62 x 1,1 m CE signed: Condition: ready for operation: Electric 380 Volt: Induction hardened rollers: Profile bending device: Digital readout: Emergency wire switch: Foot switch: 4 Funktionen Motorized three-roll bending machine with an asymmetrical roll arrangement. - both central rollers driven - per bend - Top roller can be swung out - Inductively hardened rollers for VA processing, roller surfaces top! - Side rollers on roller bearings - extended rollers for profile bending rings - Digital display for the rear roller infeed - Safety control with immediate stop of all machine movements The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, labora ...

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

sheet width: 2050 mm plate thickness: 6,00 mm pre-bending: band thickness stainless steel: 4,00 mm total power requirement: kW weight of the machine ca.: 8,00 t dimensions of the machine ca.: 3,85 x 1,10 x 1,25 m • Mobile control panel • Top roller 185 mm • Lower roller 170 mm • Conical bending device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 70 mm pre-bending: roll diameter: 660 mm total power requirement: kW weight of the machine ca.: 63 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is in good condition Top diameter: Central balls: 400 mm, side collects 300 mm, Pre-cylinder Alameda hair thickness: max. 8 mm, length: max. 5000 mm, diameter: p. 2000 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Cylinder faction 4 rollers and width 2 mtr. The machine is located in Spain.

Sheet thickness: 110,00 mm Bending length: 3500 mm Number of rolls: 4   CNC Brand: Siemens CNC Model: Siemens TOUCH Rolling width:                 3500mm Rolling thickness 3x toproll Ø:80mm Rolling thickness 5x toproll Ø:110mm Rolling thickness prebending:  90mm Top Roll Ø:                    900mm Top Roll Ø:                    900mm Bottom Roll Ø:                 800mm Side roll Ø:                   600mm Number of rolls:               4 Rolling speed:                 0-6 Adjustiment lower roll:        0-200mm/min. Adjustme ...

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3000mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  55mm Top Roll Ø:                    660mm Bottom Roll Ø:                 650mm Side roll Ø:                   550mm Number of rolls:               4 Rolling speed:                 0 - 3 M/Min Adjustiment lower roll:        0 - 300mm/min. Adjustment side rolls:         0 - 300mm/min. Number of driven rolls:        2 Power:& ...

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 3   Top support Variable geometry with three movebale rolls Linear slidews for roll movement Lubricatipon system Separate pendant control with optical position side rolls Rolling width:                 3050mm Rolling thickness 3x toproll Ø:30mm Rolling thickness 5x toproll Ø:40mm Rolling thickness prebending:  20mm Top Roll Ø:                    420mm Side roll Ø:                   380mm Number of rolls:               380 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:        ...

Four-roller bending machine make FACCIN type 4 HCI/V2100X6/4Ser-No: 87100480-0526Technical specifications:max. bending length: 2100 mmBending sheet thickness: 6.0 mmRoller diameter: 185mmDrive power: 5.5 kWWeight approx.: 6000 kgDimensions approx.: 1500 x 1500 x 4000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id      6024 MAKE           Faccin Italia TYPE             HCI 3050 - 25/20 YOP               1991 SPECIFICATIONS Rolling width        3050 mm Rolling thickness   3   x toproll Ø20 mm Rolling thickness 5    x toproll Ø25 mm Rolling thickness prebending        20 mm Top Roll Ø      400 mm Side roll Ø      350 mm Number of rolls        3 Rolling speed          6 m/min Adjustiment lower ro        ll0 - 200 mm/min. Power          25 kW DIMENSIONS Length      & ...

Sheet thickness: 6,00 mm Bending length: 2050 mm Number of rolls: 3   Make Faccin 6 mm Type Asi 2015 Year 2005 3 roll plate bender blechwalze plaatwals wals Sheet thickness (mm) Rolling = 6 mm Bending length (mm) Length = 2.050 Number of rolls Pre = 4 mm Top roll 150 mm Digital readout pos. roll Hardned rolls  

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4   SPECIFICATIONS Controll  Conventionel   Hydraulic / Mechanical Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness   40 mm Bending length   3500 mm Max. Rolling capacity Ø 2.500   40 mm Max. Prebending capacity Ø 2.500  35 mm Top Roll Ø  500 mm Bottom Roll Ø400 mm Side Rolls Ø  400 mm Power  55 kW

Sheet thickness: 140,00 mm Bending length: 3050 mm Number of rolls: 3   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic 3 or 4 roll3 roller Maximum sheet thickness   140 mm Bending length   3050 mm Max. Rolling capacity Ø 2.500   140 mm Max. Prebending capacity Ø 2.500   90 mm Top Roll Ø  900 mm Side Rolls Ø 820 mm Power  162 kW  

Sheet thickness: 10,00 mm Bending length: 8000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: PC Windows SPECIFICATIONS Controll  Faccin PC WINDOWS Hydraulic / Mechanical  Hydraulic   3 or 4 roll 4 roll   Maximum sheet thickness 10 mm Bending length  8000 mm Max. Rolling capacity Ø 2.500  10 mm Max. Prebending capacity Ø 2.500  6 mm Top Roll Ø  320 mm Bottom Roll Ø 440 mm Side Rolls Ø 340 mm Power 37 kW  

Material thickness: 12 mm Throat: 4000 mm SPECIFICATIONS Controll  Conventionel Maximum sheet thickness Steel  10 or 12 mm Max. Bank ø in the gap  4000 mm Power 37 kW DIMENSIONS Length  4000 mm Width 1200 mm Height  2400 mm Faccin Flanging machine dishing press, dished ends production, shipyard press,  

Sheet thickness: 48,00 mm Bending length: 3100 mm Number of rolls: 3   Make Faccin 48 mm Type 3 HEL Year 1998 Hydraulic 3 roll plate bender Sheet thickness (mm)Bend = 48 mm Bending length (mm)Pre = 40 mm Number of rolls Length = 3.100 Top roll = 500 / 480 side Power 80 Ps Hardned rolls  

Sheet thickness: 10,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:7mm Rolling thickness 5x toproll Ø:10mm Rolling thickness prebending:  5mm Top Roll Ø:                    220mm Bottom Roll Ø:                 210mm Side roll Ø:                   165mm Number of rolls:               4 Rolling speed:                 0 - 5 m/min Adjustiment lower roll:        200mm/min. Number of driven rolls:        2 Power:                      & ...

Sheet thickness: 3,00 mm Bending length: 1050 mm Number of rolls: 2   MACH-id    5315 MAKE         Faccin Italia TYPE           HCU 1050 x 3 YOP             2008 SPECIFICATIONS Controll          Manuel Hydraulic / Mechanical         Hydraulic 3 or 4 roll       2 roll Maximum sheet thickness            3 mm Bending length        1050 mm Top Roll Ø        100 mm Bottom Roll Ø       300 mm Working speed M/Min.         7 M/min. DIMENSIONS Length        2600 mm Width          1250 mm Height         1900 mm  ...

Sheet thickness: 13,00 mm Bending length: 2000 mm Number of rolls: 3   Make Faccin 13 mm Type DP3 - 2021 Year 2008 3 roll hydraulic plate bender Sheet thickness (mm) Rolling = 13 mm Bending length (mm) Pre bend = 9 mm Number of rolls Length = 2.000 Top roll = 215 Lower roll = 195 Power = 10 Hp Digital read out hydraulic drop end    

Sheet thickness: 10,00 mm Bending length: 4000 mm Number of rolls: 3   3 roll driven Digital read out Rolling width:                 4.000mm Rolling thickness 3x toproll Ø:9mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  7mm Top Roll Ø:                    285mm Side roll Ø:                   265mm Number of rolls:               3 Power:                         14kW Length:                        6.200 mm  Width:                         1.600 mm  Height:  ...

Sheet thickness: 4,0 mm Bending length: 2000 mm Number of rolls: 3   Make Faccin 4 mm Type ASI / M Year 1996 Asymetric 3 roller Sheet thickness (mm)Thick = 4 mm Bending length (mm)Length = 2.000 Number of rolls  3 Digital read out Foot switch L & R Mot. side roll CE Safety  

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   FACCIN - 3 HEL 3134 3 roll plate bender 3000 x 25 mm MACH - ID 6329 Make: FACCIN Type: 3 HEL 3134 YOP: 2009 Rolling width      3.000 mm Rolling thickness 3 x toproll Ø    20 mm Rolling thickness 5x toproll Ø     25 mm Rolling thickness prebending      18 mm Top Roll Ø     340 mm Side roll Ø     300 mm Number of rolls    3 Rolling speed      0 - 5 m/min Adjustiment lower roll      200 mm Power      20 kW Dimensions Length      5.000 mm Width       2.000 mm Height      2.100 mm Weight     13.000 kg