We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Machine type: Fully automatic TIG welding system with turntable Manufacturer: ESS Model: 211 DTG / DT50 / PS 8 Year of construction: 1999 Condition: very good Type of offer: used machine Specifications: Control: Control unit: ESS PS 8, Pulse remote control FSP 100 Table: swivelling turntable Type: DT 50 Diameter: 300 mm Load: 50 kg Speed range: 0.43 – 13.0 rpm. Drive: 3 – 205 Amp. / 230 V, automatic ignition Remark: with three-jaw chuck and various accessories, Complete documentation The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.
used
- Adjustment range: 3 - 225 A - TIG open circuit voltage: 90 V - Total power: 6.5 kW - Machine weight: 84 kg - Space requirements (W x D x H): 0.83 x 0.46 x 0.64 m Details with cooling, additional foot switch Accessories Documentation, ground cables
used
DC TIG shielding gas - welding system Sweat strom_ 40 - 360 Amp. Incl. cooling system, ESS type: KG 1, good hose package, fitting, various new 2 mm needles, various new ceramic nozzles and rolling chassis. Power supply: 380 Volt, 32 Amp. Weight: approx. 120 kg. Freely loaded from stock. Good operational condition. Without bottle. The system can be inspected and tested under electricity and is immediately available. Shipping with forwarding agency possible by arrangement. Please also note my other entries.
used
ESS 220 WS Wig only suitable for aluminium as it is a pure verk-stream device Elktroden welding machine 230 and 400Volt possible Size 500 1000'700mm Technical data see pictures
used
Description: welding device is defective max 300 A water-cooled Approx. Onsite Dimension. (l x w x h): 440 x 900 x 950 mm, weight approx.: 127 kg
used
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Welding turntable ESS type DT 50 Fabr. No. 86 / 1125 Year of manufacture 1986 Load max. 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm. Control voltage 24 volts , motor power 100 watts , mains connection 220 volts, 50 Hz. - Face plate in the position, infinitely swivelling by 180 - speed control via rotary potentiometer - clockwise, clockwise rotation, foot switch - 2-stroke and 4-stroke operation - sliding contact for the mass up to 200 Amp. - new control ESS PS3 from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition; used
used
Description: 50-60 Hz , 40 amperes , weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 600 x 930 mm
used
TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) TIG Welding Machine Fabr. No. 0507214 Year of construction 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - pulse welding mode- rod electrode operating mode- water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space requirements L x W x H 1000 x 450 x 710 mm Weight 90 kg very good condition; used
used
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Fabr. No. 0907036 Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. • DC and AC welding • HF ignition • Infinitely variable power adjustment • 2-stroke and 4-stroke welding operation • Pulse welding mode• Rod electrode operating mode• 8 meter hose package with TIG burner• Inert gas pressure reducer • Fan cooling • Portable Space requirement Welding machine L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition; used
used
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine -Type: Squarearc 306 -Welding power: max. 300 A, see nameplate -Air cooled -Accessories: including hose package, ground cable, gas fitting see photos -Dimension: 820/440/H945 mm -Weight: 127 kg
used
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROTIG 250 -Welding power: max. 250 A, see nameplate -Accessories: incl. hose package, ground cable see photos -Dimension: 1180/675/H900 mm -Weight: 264 kg
used
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg
used
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg
used
Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg
used
TIG welder, inverter welder, TIG welder, inverter welder -Manufacturer: Ess, TIG welder AC -Type: 130 TG -Voltage: 220V -incl.: ground cable, gas fitting, hose package -Welding power: max. 130 A, see type plate -Air-cooled -Dimension: 590/220/H400 mm -Weight: 56 kg
used
Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: ESS, double welding turning device, swiveling -Turntable distance: 975 mm -Program control device: 2x ESS type PS 2-3 -Direction of rotation: right / left rotation -Welding smoke extraction pipe: without welding smoke filter, can be supplied at an extra charge -Dimensions: 2000/1400 / H1950 mm -Weight: 552 kg
used
Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg
used
Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device -Table is: tiltable -Clamping diameter: 450 mm -Center bore: Ø 62 mm -Drive: 0.2 kW -Speed: 0.08 - 2.4 rpm -Load: 120 kg -Control: PS3 -Footswitch -Dimensions: 800/460/H480 mm -Own weight: 112 kg
used
Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Table is: tiltable -Clamping diameter: 450 mm -Drive: 0.2 kW -Speed: 0.08 - 2.4 rpm -Load: 120 kg -Control: PS3E -Foot switch -Dimensions: 520/450/H475 mm -Own weight: 110 kg
used
Inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 320 A. -4 roller drive -Water-cooled -Incl. Ground cable -with: removable wire feeder -Gas valve -Hose package -Also suitable for: robots -Number: 2x devices available -Price: per piece -Dimensions: 1155/500/H1030 mm -Weight: 263 kg
used
Module converter, electronic module -Handover: in the current state as viewed -Electronic module: defective -Board type: ESS FE13-3 US4-1 -Dimensions: 260/180/H100 mm -Weight: 0.8 kg
used
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: earth cable, gas valve, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimensions: 1300/570/H900 mm -Weight: 262 kg
used
Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Table: is tiltable -Load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Number: 1x welding turning device available -Price: per piece -Dimensions: 830/450/H920 mm -Own weight: 174 kg
used
TIG welding machine, welding machine, TIG welding machine -TIG welding machine: AC direct current -Hose package: 1 -with accessories: gas nozzles, needles, mixing nozzles, ceramic nozzle shells ... -Max. Welding power: 220 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 870/455/H665 mm -Weight: 112 kg
used
Amperage range maximum: 300 A Amperage range minimum: 240 A Welding machineESS - SynMag 4000 MACH-ID 7643 Make: ESS Type: SynMag 4000 Year: 2008 Rated power 60 %:300 Rater power 100 %:240 Imput: 400A Length: 900mm Width: 600mm Height: 900mm Weight: 180kg
used
MIG-MAG Impulse welding machine make ESS type Transmig 401Machine -No: 06880396 Year 1996Power range: 40 - 400 A100% ED at: 360 A80% ED at: 400 AWith- separate wire feeder type DVK 11- water cooled- Hose package with burnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Portable TIG welder make ESS type 160 DTGMasch. -No: 0498036 Year 1998 for DC-TIG and electrode weldingAdjustment range: 5 - 160 A50% ED at: 160 A60% ED at: 145 A100% ED at: 110 AIdling speed: 100 VStick electrode: 1.5 - 3.25 mmWeight approx: 13.5 kgOutside dimensions approx: 340 x 210 x 360 mmWith- TIG hose package with burner- Ground cable- Pressure reducerlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
TIG welding machine make ESS type Uniarc 5Machine -No: 0290650 Year 1990Max. Power: 210AED at 210 A: 35%ED at 160 A: 60%ED at 130 A: 100%External dimensions approx: 600 x 900 x 850 mmWith- mobile- 5.0 m hose package with TIG torch- Ground cable with ferrule- Gas hose with pressure gauge- Foot remote controlused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools