used ERKA WM

Erka Brezellangroller Stainless steel cladding analog control 2 level Power: about 2000 pcs/h 380V 50Hz Height: 150cm Width: 230cm Depth: 100cm

Wrapper Model: WMB 30 for all sticks such as corn spitz, pretzel and pretzel sticks, etc. Combi - winding machine for pretzel strands Long scooter 300 mm foldable DGUV V3 tested Machine mobile Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled More top bakery machines in stock! with 6 months warranty only on spare parts Option: Feeder

P59 - used appr. 25 m³ / 25,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom, manufacturer Erka. Vertically standing, aboveground storage tank, water tank, whey tank, feed tank, brine tank, slurry tank, etc. capacity: 25m³ / 25,000 litres material: GRP tank dimensions: appr. Ø 3.00m x height 3.70m weight: appr. 2.5t Multiple connections, see pictures. The tank is in used condition, according to the age signs of wear are present. The container can be used as storage tank for water, whey, stillage, potato steam skins, liquid feed, manure, seeping juice, rapeseed oil, as rain collection tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...

Erka wrapping machine for baguettes with long roller table new bands technically checked

P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in  ...

Spiral kneader Erka Model: SA/SR 180 with 1 extendable tank wagon manual control Kneading machine for max. 180 kg dough Dough machine with flour dust hood with 2 timers and 2 gears Lever locking Connection 400V, 32A-CEE plug DGUV V3 tested Used machine overhauled with 6 months warranty

Erka Long Scooter Type: MK-B 50 Run-off belt Band width inside: 48cm Strap: 60cm with lower frame on wheelchairs ready for action tested & cleaned Height: 152cm Width: 80cm Depth: 100cm

It is a used, reconditioned Erka spiral mixer SR 180 for sale. It is for a maximum of 180kg of dough / 110kg of flour. The spiral mixer is fully functional, runs very quietly and is in top condition. The machine has a stainless steel bowl, a stable stainless steel spiral, is mobile and has a dust cover. The spiral mixer has 2 time clocks and 2 speeds as well as a mixing gear. All bearings and V-belts of the machine have been renewed. The machine has been repainted. The bowl gearbox was renewed. Bowl diameter: 840mm, bowl height: 495mm Price on request.

Pretzel plant (to Manuel Schlingen) Plant consisting of: - High conveyor belt for dough pieces (can be crosswise from a roll head machine be fed. - Winder Erka with long-acting board for pretzel - Sling table Mass: High conveyor belt (L=2100 mm, W=700 mm, height=1680 mm) Transfer width head machine: 700 mm Mass winder with long-acting device (L=2450 mm, W= 1150 mm, H= 1500 mm) Dimensions of loop table (L0 3850 mm, W= 1150 mm, H= 920 mm ) Belt width: 500 mm Table: Frequency controlled All devices in good condition, technically tested

Professional strapping machine with frame internal dimensions of approx. width 870 x height 610 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic castors on the table surface. -Strapping can alternatively be triggered by hand switch or foot switch. -Up to approx. 20 straps per minute. -Bandwidth 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape weft monitoring. -Closure type: Welding using the hot wedge method. -Electronic temperature control. -The machine can be pushed and fixed via castors. The machine can be demonstrated under electricity.

Professional strapping machine with frame internal dimensions of approx. width 870 x height 610 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic castors on the table surface. -Strapping can alternatively be triggered by hand switch or foot switch. -Up to approx. 20 straps per minute. -Bandwidth 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape weft monitoring. -Closure type: Welding using the hot wedge method. -Electronic temperature control. -The machine can be pushed and fixed via castors. The machine can be demonstrated under electricity.

Material: stainless-steel Further information: The chemical masticator allows a crushing with closely particle dimension- allocation, without dust. The closely particel-spectrum is reached through a continuous pressure allocation-surge strain between two checkered rollers and a choiceed roller- clearance. The roller-masticators WMC hackle tender, brittle up to ductile-dure products, at example: • Superabsorber • Polymer • Urea • Potash • Polyacrylat • Phenoplaste • Kalziumsulfat • Ammoniumnitrat • Pektin • Pillcrack • Ammoniumbicarbonat • Electronic trash • Max.durance of product: 4-6 Mohs • Reachable subtlety of products: ca. 100 µm • Closely particel-dimension-allocation of final product Product supply/dosage: • A continous charging over whole roller-length is guaranted of a roller- dosage-installation or • al ...

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

WMB 2/2 Manufacturer | Manufacturer W. Müller Machine type | Machine type WMB 2/2 Stations | Stations Double station | Double station Construction year | Year of construction 1991 Location | Location UES Clamping force | Clamping force 30 kN Control system | Control type Orig. W. Mueller Extruder | Extruder 80 / 24D Parison Head | Hose head Simple-head | Single head Mould Dimension mm (A Long / B Wide / C High) | Shape dimensions mm (A length/B width/C depth) In data sheet | In the data sheet bottle volume | Bottle volume 2 L Delivery time | Delivery time 1-2 weeks | 1-2 weeks The machine is complete. It can be put into operation immediately. | The machine is complete. It can be put into operation immediately.

Tank car WMIEstainless steel boiler for WMI kneader approx.for 160 kg doughKettle dimensions : 87x51cmSee picture for details

High speed milling machine built in Sweden 1999. Has only worked with soft materials so it is in great condition.

Machine Details Warehouse number 1105-03654 Machine Type Machining Center - Vertical Make ycm SUPERMAX Type wmc 1100 a Year of construction 1994 Control type CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1100 mm y-travel 600 mm z-travel 630 mm CNC control FANUC OM Table size 1200 x 600 mm Spindle holder ISO 40 bt Spindle speeds 45 - 8000 1/min Spindle drive motor 11 ( 30 min ) kW Tool changing device for 30 tools table load 1200 kg Projection 630 mm Operating voltage 380 V Rapid traverse speed 12 m/min Feed range 1 - 5000 mm/min Machine weight approx. 6.6 t Space requirement approx. 2.90 x 2.60 x 2.50 m Information - Control: FANUC o M - Coolant device MAGAZINE 30 COMPARTMENT DOUBLE ARM

BRAND: FLOW YEAR: 2007 MODEL: WMC2 4030 PRODUCTION HOURS: 4247 APPLICATION TYPE: WATER CUTTING LOCATION: CZECH REPUBLIC MACHINE TYPE: WATERJET CUTTING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FLOW MODEL: FLOWMASTER 6.0 MOVEMENT X-AXIS MOVEMENT: 4000 MM Y-AXIS MOVEMENT: 3000 MM MEDIA PUMP DRIVE POWER: 4150 ADDITIONAL EQUIPMENT - ABRASIVE MATERIAL 5 TONS - SPARE HIGH-PRESSURE PUMP 37 KW - SPARE PARTS - CANTILEVER RACK Additional Information MACHINE HISTORY MATERIAL TYPE: PLASTICS, STEEL MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WATER TREATMENT SYSTEM - ABRASIVE MATERIAL HOPPER - INCL. ADS (ABRASIVE DELIVERY SYSTEM) - PASER ECL CUTTING HEAD - FLOW CAD 6. 0 SOFTWARE - FLOW MASTER 6. 0 SOFTWARE - THE RACK SYSTEM IS INCLUDED QUALITATIVE MACHINE BENEFITS: - REGULARLY SERVICED AND IN A VERY GOOD CONDITIO ...

CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories

: gebraucht : 1962 : 3962 : prompt, Zwischenverkauf v : 3950 € : 1 : 40 mm : MK 4 : 350 mm : 32 - 1400 U/min : 1100 mm : 700 mm : 2650 mm : 1055 kg : automatisch 0,11 - 1,73 ( mm/U : 650 (max) mm : 780 x 650 mm : 280 mm Radial drilling machinewith 12 Revs 9 automatic feeds coolant pump Nouser manual DOES NOT COMPLY WITH THE GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BRAND: FLOW YEAR: 2003 MODEL: WMC 2 4020 MACH 4 PRODUCTION HOURS: 6580 APPLICATION TYPE: WATER CUTTING LOCATION: GERMANY MACHINE TYPE: WATERJET CUTTING MACHINES AVAILABILITY: IMMEDIATELY GINDUMAC ID: DE-WAT-FLO-2003-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 2000 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 78000 PSI PUMP 75KW - FLOW SOFTWARE INCLUDED FLOW MASTER 6 - TWO HEADS - ONE INSTALLED + READY TO USE, ONE AVAILABLE AS A SPARE PART

Roll crusher with drive motor 50kw and hydr. Starting clutch. Probation possible.