used EISELE VA

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

dimensions of saw-blade: Ø 320-350 x 3,0 mm cutting range: 120 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: flat: 200 x 90 mm capacity 45 degrees: flat: 140 x 90 mm work height max.: 925 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6,0 - 8,0 bar engine output: 1400 / 2800 U/min. total power requirement: 2,0 / 2,6 kW weight: 470 kg range L-W-H: 850 x 900 x 1800 mm ** Machine including special accessories (!!) Furnishing : - semi-automatic vertical cold circular saw - Pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter setting with fixed stops - Convenient stroke adjustment of the saw unit via clamping levers - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Coola ...

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. Th ...

Metal circular saw cold circular saw Eisele VMSII Metal circular saw Eisele, partially newly laced, incomplete as spare parts carrier or for completion. The machine was partially dismantled for overhaul and partially re-laced. The electric motor and the gearbox work, machine table and vice are in order. Coolant tub, base. The lever for the feed movement, the associated rack, the electric switch, the saw blade, the clamping nut for the saw blade etc. is missing. The saw can be minbecauseed in the miter. Sale as spare parts carrier!

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 400 x 30 mm capacity 90 degrees: flat: 345 x 70 mm capacity 90 degrees: square: 140 x 140 mm capacity 45 degrees: flat: 280 x 30 mm capacity 45 degrees: flat: 240 x 70 mm stroke: 240 mm saw blade turning speeds: 6 / 12 / 24 / 48 n/min work height max.: 1000 mm engine output: 3,0 / 3,6 kW weight of the machine ca.: 1150 kg range L-W-H: 1000 x 1330 x 1860 mm Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including “EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stag ...

Semi-automatic Hydraulic Metal Circular Saw Make EISELE Type VMS IV-440 HyYear of construction 1982Saw blade diameter: 400 mmCutting area flat profiles straight: 240 x 95 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 Miter: 180 x 75 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 straight: 150 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 round: 150 mmMiter cuts left / right: 45/30 °Saw blade speeds: 12.5 / 25 rpm.Pre-adjustable without steps: automaticallyVoltage: 380VDrive power: 2.6 / 3.2 kWWeight: 670 kgWith- hydr. Action vice- hydr. stop plate- Coolant device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IFabr -No: 9000150Saw blade diameter up to: 275 mmCutting area 90 ° round: 90 mmxa0xa0xa0 flat: 75 x 120 mmxa0xa0xa0 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpm.Drive motor: 380 V, 1.4 / 1.9 kWDimensions L x W x H: 600 x 600 x 1500 mmWeight approx: 170 kgWith- Underframe- Coolant pumpused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Metal circular saw make EISELE type PSU hydr. 470Machine -No: 1182 built in 1987Max. Saw blade size: 450 mmGreen cutting height: 150 mmCutting area e.g. flat: 400 x 30 mmxa0xa0 or: 345 x 70 mmxa0xa0 or: 300 x 95 mmxa0xa0 round: 150 mmxa0xa0 square: 140 140 mmxa0xa0xa0 NP: 280 mmStepless saw blade speeds: 6 - 48 rpm.Feed infinitely variable: 0 - 1.5 m / minDrive power: 3.0 / 3.6 kWDimensions: 1000 x 1400 x 1850 mmWeight approx: 1100 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS I PV 410Machine -No: 0005, built in 1980Saw blade diameter max .: 275 mmCutting area 90 °: 120 x 75 mmCutting area 45 °: 80 x 75 mmCutting area pipes: 90 mm2 saw blade speeds: 40/80 rpm.Drive power: 1.0 / 1.2 kWDimensions: 800 x 600 x 1400 mmWeight: 290 kgWith- stationary base- Cooling device- pneumatic saw blade feed- pneumatic viseused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IIMachine -No: 24968 Year 1973Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mmSaw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx: 300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw semi-automatic make EISELE type VMS II PVMachine -No: 3906 Year 1972Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mm2 saw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx. 300 kgWith- stepless saw blade feed- pneumatic vice- Cooling deviceused, from one operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Transportable metal circular saw make EISELE type TKS - G / 225Machine -No: 2254 Year 1985Saw blade size: 275 mmCutting area 90 ° round: 90 mm: 90 ° square: 80 x 60 mm: 45 ° round: 60 mm: 45 ° square: 60 x 40 mmSaw blade speed: 58 rpm.Vise swiveling: 90 - 45 °Drive power: 0.65 kWPower connection: 220 V / 50 HzWeight approx: 38 kgOutside dimensions approx: 640 x 320 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS II / 033Machine -No: 31902 Year 1976Saw blade diameter: 275 mmCutting area flat: 140 x 70 mmMiter cutting area: 100 x 70 mmPipes: 3 U-iron: NP 14 / NP 10Solid material: 80/60 mmSquare material: 50 x 50 mm2 saw blade speeds: 40/80 rpmDrive power: 1.9 kWOuter dimensions approx: 800 x 700 x 1500 mmWeight approx: 268 kgWith- pneum. vice- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Circular Sawing Machine Make EISELE Type VMS / 041Machine -No: S76383 Year 1976Saw blade diameter up to: 275 mmhere cutting area at 90 ° round: 90 mmxa0xa0xa0 Flat profile: 75 x 120 mmxa0xa0xa0 in miter at 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpmDrive motor: 380 V, 1.4 / 1.9 kWDimensions: 600 x 600 x 1500 mmWeight approx: 170 kgWith- pneum. vice- mobile undercarriage- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High performance circular saw machine make EISELE type PSU 470-PV (pneumatic)Make no: 10306-48, year of construction 1986 (VA suitable)Saw blade diameter: 450 mmCutting area around 450 mm saw blade: 150 mmsquare: 140 mmFlat material at 90 °: 400 x 30 mmFlat material at 45 °: 280 x 30 mmSaw blade feed stepless: 0 - 1150 mm / minStepless speed range: 6 - 48 m / minDrive power saw motor: 3 / 3.6 kWDimensions: 1100 x 1100 x 1650 mmWeight approx .: 1200 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Semi-automatic cold circular saw Eisele VMS-ll-300 PV Built in 1989 Saw blade diameter 300 mm Cutting diameter 90 mm Stroke 100 mm Cutting range max. 170 x 70 mm Miter cuts 90 - 30 ° Speed range 40 / 80 rpm Operating voltage 380 V Total power requirement 2.0 kW Machine weight approx. 350 kg Room requirements approx. 0.80 x 1.00 x 1.70 m - Factory Number: 095-37348 - automatic feed infinitely adjustable - Miter - Coolant device

Semi-automatic metal circular saw Fabr. EISELE Type VMS-II-PV / PROD Built in 1992 Masch.Nr: 072-10468, Saw bladedrm. max.: 300 mm Cutting area flat: 160 x 80 mm 4 saw blade speeds: 10 / 20 / 40 / 80 rpm. Drive power: 1.4 / 1.9 kW External dimensions approx.: 800 x 800 x 1600 mm - pneumatic vice - pneum. Saw blade feed - Triggering of the workflow of starting up the material by triggering device of the length stop - infinite feed control - Cooling device in the base - Roller conveyor approx. 3.5 meters with measuring stop 3000 mm - Measuring stop 4000 mm used, in good condition

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

2 assembled aluminum circular saws make EISELE type LMS III PVMachine -No: 2224 + 2225 built in 1988xa0Technical specifications:Saw blade size: 400 x 4.0 x 40 mmCutting area 90 °: 500 x 140 mmhor. 45 ° L + R: 400 x 140 mmvertical 45 ° L: 500 x 90 mmVenetian blind box profile: 500 x 152 mm(with saw blade 410 mm)Saw blade speed: 2800 rpm.Drive power: 2.6 kWWeight per piece: 670 kgExternal dimensions per piece: 1800 x 800 x 1300 mmWith- hydr. stepless feed- Spraying device2 identical saws LMS III PV - mounted together on a base frame - for cutting larger widths and mitres 45 ° L and 45 ° R!The saws are sold together or single!If the saws are sold together, a designated cabinet is included.The saws come from a CNC controlled profiling machineThe technical. Data concerns 1 machine. When taken over and used in the now inflated state (both machines assembled opposite each other), the machi ...

Double Miter Saw Make EISELE EMMEGI Type VISA -2 TU / 5Fabr. -No: 148402, built in 1988Saw blade diameter: 450 mmSection length min.:240 mmSection length max .: 5000 mmDrive power: 2 x 2.5 kWOutside dimensions approx. 6500 x 1400 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools