used EMCO PC

A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h

CNC lathe EMCO TURN 342, built 1992 After pressing "Aux on", the machine switches off again with fault X/Z axis. Drives and amplifiers are ok. According to EMCO Service, the error comes from the setpoint specification of the driven tools. The error messages were probably not broken down in detail at the time. - X: 150 mm - Z: 300 mm - Circumferential Ø over bed: 340 mm - Circumferential Ø over cross slide: 158 mm - Speed range: 0 - 4000 rpm - Spindle passage: 65 mm - Tool holder: DIN 55026 - Revolver: 8-fold - driven tools: yes - Chip conveyor: yes - Control: Siemens Sinumerik - Total power: 20 kW - Machine weight: 2400 kg - Dimensions (W x D x H): 2.78 x 2.11 x 1.71 m - Switch-on hours: 56286 h Accessories no other accessories

BRAND: EMCO YEAR: 2013 MODEL: CONCEPT TURN 450 PRODUCTION HOURS: 26337 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: EMCO SIEMENS MODEL: SINUMERIK OPERATE MAIN DRIVE SPINDLE SPEED RANGE: 6300 1/MIN

BRAND: EMCO YEAR: 2016 MODEL: HYPERTURN 45 PRODUCTION HOURS: 27054 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - APPROX. 70 CLAMPING HEADS - APPROX. 30 TOOLS - HEINBUCH CHUCK INSTALLED - COOLANT SYSTEM - FILTER SYSTEM - TOOL CABINET - 3M BAR LOADER - EMCO TOP LOAD 8-50

EMCO - Loading arm 4 inches - used - as spare part carrier

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of construction: 2003 Production number: R2A R40 01 Center height: 1160 mm Center width: 700 mm turning length: 510 mm orbit diameter over bed: 430 mm rotation diameter via paddling slide: 210 mm workpiece weight: 30 kg Working spindle: Spindle head according to DIN5026 Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm chuck diameter: 160 mm Rod passage diameter: 45 mm torque: 78 Nm Support: Tool system DIN69880 Chisel cross-section: 12 x VDI30 Number of bed sleds: 1 Number of paddling sledges: 1 Plan stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill cone: MK4 Quill diameter: 60 mm Main spindle: 1500 rpm Plan axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Feed speed: Longitudinal slide min./max.: 0/24000 mm/min Paddling sledge min./max.: 0/20000 mm/mi ...

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight signs of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: hole spacing: 90mm / 390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Clamping plates : A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,- Cube table for radial drilling machines: unused, dimensions: 560x550x550mm. 1 x smaller, but swivelling!

Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21 2011 perfect quality

Stock number: 3741 CNC LATHE Manufacturer: EMCO, Type: CONCEPT TURN 155 Machine NO.: A8FS4702, Year of construction: 2004 Specifications: orbit diameter 85 mm dia. Turning length 245 mm Main engine power 2.8 kw Main spindle speed range 4000 rpm Spindle bore 20.5 mm dia. C axis - main spindle movement 0.001 degrees X axis movement 100 mm Z ash movement 300 mm Tool turret with 12/6 - VDI 16 stations Driven stations revolver 1 6 pieces. Motor power Driven tools 1.2 Kw Powered tools 200-6000 rpm Total power consumption 5 kva Control FANUC 21T Fabr. Controlled in 3 axes Accessories: Manuel Chuck Main Spindle 100 mm dia Cooling water system. Tailstock Length: 1500 mm, Height: 1800 mm, Width: 1300 mm, Weight: 1000 kg

Table length: 1300 mm Table width: 520 mm Longitudinal X: 1000 mm Cross Y: 500 mm Vertical Z: 600 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens 3-axis CNC machine (VMC)EMCO Famup - VMC 100  X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              600mm Table Length:            1300mm Table Width:             520mm Table load:              800 Feed rate X-Axis:        30000mm/min. Feed rate Y-Axis:        30000mm/min. Feed rate Z-Axis:        30000mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:      &nbs ...

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

Emco ET 420 / Double spindle lathe, Year of construction 2004, Control Siemens, max rod passage 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, Double rods loading magazine, Main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12 fach VDI 16, 4 angetr. Tool stations / turrets, Conveyor coolant device, Parts catcher long parts ( self-made )

BRAND: EMCO PADOVANI YEAR: 2001 MODEL: LABOR E260 APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FAGOR MODEL: CNC MAIN DRIVE SPINDLE MOTOR POWER: 15 KW MOVEMENT Z-AXIS MOVEMENT: 1500 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAXIMUM WORKABLE LENGTH*1 (CAPACITY) 1500 - TURNING UNDER HEAD 520 - TURNING ABOVE THE CARRIAGE 300 - TURNABLE ON THE 300 WAGON - BAR PASSAGE 78MM - SPINDLE 250 MM - 4-POSITION MANUAL TURRET

Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...

Emco Emcoturn 365 - 65, Year of construction 2000, Control Siemens 810 D, Travel X/Z 210/610 mm, Turret 12-fold VDI 30 all stations driven, Angetr. Tools up to 4,000 rpm, collet chucks, Tailstock C axis 0.001°, spindle speed up to 6,300 rpm, coolant device, Chip pan, accessories, Available from 12/2023

Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm

BRAND: EMCO YEAR: 2003 MODEL: VMC 300 APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK

Emco FB-5 - Tool Milling Machine - 3-axis position indicator - Hydraulic tool clamping - Coolant device - Chip protection - Built in 1998 Specification - Mounting: SK40 - X-axis travel: 600 mm - Y-axis travel: 400 mm - Z-axis travel: 400 mm - Feed speed X/Y/Z: 8 - 800 mm/min (8 steps) - Quill stroke: 105 mm - Spindle speed: 63 - 3150 rpm (18 steps) - Milling head swivel range: ± 90 ° - Table size: 800 x 400 mm - Table load: 400 kg - Motor power: 4 kW - Total power consumption: 5.3 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 2500 x 2200 x 2200 mm - Machine weight: 2900 kg

BRAND: EMCO YEAR: 2014 MODEL: EMCOMILL E 1200 PRODUCTION HOURS: 14677 APPLICATION TYPE: MILLING LOCATION: CZECH REPUBLIC MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 5300 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 828 D MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 12000 1/MIN SPINDLE MOTOR POWER: 11 KW NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 1200 MM Y-AXIS MOVEMENT: 550 MM Z-AXIS MOVEMENT: 500 MM WORKPIECE WORKPIECE WEIGHT: 1000 KG TABLE OUTER LENGTH: 1300 MM OUTER WIDTH: 570 MM TOOLS SLOTS IN STORAGE: 30 MAX WEIGHT: 8 KG MAX TOOL DIAMETER: 80/125 MM MAX TOOL LENGTH: 250 MM TYPE OF TOOL HOLDER: ISO 40 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 4TH AXIS TABLE - RAPID FEEDRATES X/Y/Z: 24 M/MIN - HEIDENHAIN + BLUM  ...

BRAND: EMCO YEAR: 2015 MODEL: E900 PRODUCTION HOURS: 39500 APPLICATION TYPE: TURNING LOCATION: AUSTRIA MACHINE TYPE: VERTICAL MACHINE CENTER AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: HEIDENHAIN MAIN DRIVE SPINDLE SPEED RANGE: 10000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TRAVELS 900X500X500 - INCL. TOOL CHANGER 20 COMPARTMENTS - COOLING 3 BAR - +HIGH PRESSURE 20 BAR