EISELE used machine for sale

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° approx. 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 17 + 34 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg

Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

Eisele PSU Hydraulics 470 Masch Nr 1141 Built 1986 RPM 6-48

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

IRON SAW Cutting diameter: 100 mm Blade dimensions: 280 mm Speed range: 10, 20, 40, 80 RPM Cutting range 90 ° flat: 120 x 100 mm Cutting range 90 ° round: 100 mm Length stop: 500 mm Semi automatic electric fence Automatic sawing cycle Pneumatic clamping prepared for pneumatic feeder Total power: 1.5 kW Machine weight: 700 kg Condition: good Accessories: 18 blades, roller conveyor 2 m

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive  ...

Description: Technical data: Cutting width 150 mm Cutting height 120 mm Saw blade dimensions 350 mm Motor power 4.5 kW Cutting length 4000 mm Speeds 2890 rpm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,200 x 1,650 mm, weight approx.: 650 kg

Rotational speed: 7-70/min, voltage: 400V.

: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 x 2.5 x 40 mm cutting diameter: 90.0 mm capacity 90 degrees: flat: 140 x 70 mm capacity 90 degrees: square: 80 x 80 mm capacity 45 degrees: round: 70.0 mm capacity 45 degrees: flat: 90 x 80 mm cutting speed: 40 / 80 U/min total power requirement: 1.2 / 1.4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition () Furnishing: - manual cold circular saw - Column-guided saw head - one-sided miter adjustment over mounted turntable Material support table with degrees - mobile machine base - Pole-changing motor (2x cutting speeds) - manual cutting/lifting version - manual material tensioning - 1x circular saw blade - 1x material stop Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9164093 The data for this ad was created with  ...