2 x Demag Systec 420 / 820 - 2300 , year of construction / year 2006 , 31,000 h operating hours /running hours. Machines with few operating hours and very good condition / Machines with low runninghours and in good condition. - Screw diameter / Screwdiameter x 80 mm , shot volume / shot volume: 1.583 cm3 Extra Equipment / Extar Equipment : - Enlarged ejector plate lt Euromap / Enlarged ejectionplate according to Euromap. - 2 x air valves on movable clamping plate / 2 x pneumatic valves on movable platen. - 2 x air valves on fixed clamping plate / 2 xPneumatikvalves on fixed platen. - 2 x circuits for hydraulic core pull / 2 x circuits for hydraulic corepull. - 2 x connections for core pull to movable clamping plate / 2 x Connections for corepull on fixed plate.
DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158
DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes
Key data: 2000 kN
Demag Ergotech Extra 200-840 EcQ with the Wittmann-Demag W721 robot / machine in very good technical condition Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 570 g Spray pressure: 1351 bar Dosing volume: 636 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 580x580 mm Size of clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Air Valve x 4 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Central lubrication Built-in emulator – a copy of the machine system on a flash card Robot Wittmann W721 Year of construction: 2006 5-axis robots: 3 axes are driven by servo motors (electric); Axis C and Motion A Travels in axes: X-550, Y-1200, Z-2000 Touch control panel The ...
Key data: 500 kN
Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...
Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains
Key data: 600 , 52 , 25
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3
E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Fabr. No.61456646 Year of construction 2003 Payload: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm 1 load line = 200 kg - with control logic DKES2/5 500V - without crane operation - Dematik BUS control via crane system control - without roller chassis Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A good condition; used
E-chain hoist, electric hoist, crane DEMAG type DKUN 2-200 K V1 F4 Fabr. No. 61455454 Year of construction 2003 Load capacity 200 kg Hook travel 4.1 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 4.2 x 12.2 mm Cable length Control bottle approx. 2.75 meters Mains connection 400 Volt, 50 Hz 1 load line = 200 kg Net weight 31 kg good condition; used
Injection molding machine Manufacturer: DEMAG Type: ERGOTECH 200-840 COMPACT Year of construction: 1995 Machine number: 877 0165 Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 89 A Clamping force: 2000 kN Locking force: 2200 kN Opening distance: max. 575 mm Tool installation height: min. 310 mm Tool installation height: max. 660 mm Maximum distance between tool mounting plates: 1235 mm Tool clamping plates: 830 x 830 mm Highlight column spacing: 560 x 560 mm tool weight: 2500 kg weight proportional to movable tool mounting platens: 1700 kg Hydraulic ejector: Ejector displacement: 180 mm Ejector force: 80 kN Ejector retraction force: 35 Injection unit: 840 Screw diameter: 60 mm Injection pressure: 1351 bar Displacement: 636 cc Moulded part weight: 570 g Dosing distance: max. 225 mm Nozzle travel: max. 440 mm Nozzle immersi ...
Ref. no.: 18262 Hersteller: DEMAG Year of construction: 2006 Clamping unit Clamping force: 60 ton Opening stroke: 600 mm Distance between tie bars: 420 x 420 mm Mould height min.: 200 mm Opening width: 750 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 25 mm Injection volume: 61 cmÂ³ Shot weight: 54 g Injection pressure: 2752 bar Measurements and weight Dimensions: 4,1 x 1,4 x 4,2 m Machine weight: 3950 kg Further information: The machine received a new cylinder and a new screw in December 2022
Ref. no.: 17024 Hersteller: DEMAG Year of construction: 1999 Clamping unit Clamping force: 200 ton Opening stroke: 575 mm Distance between tie bars: 560 x 560 mm Mould height min.: 310 mm Mould height max.: 660 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 45 mm Injection volume: 358 cmÂ³ Shot weight: 320 g Injection pressure: 2402 bar Measurements and weight Dimensions: 5,7 x 1,7 x 2,1 m Machine weight: 9140 kg Additional information & extras Hot runner systems: 8 pcs.
Ref. no.: 17516 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 100 ton Opening stroke: 500 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 25 mm Injection volume: 61 cmÂ³ Shot weight: 54 g Injection pressure: 2752 bar Measurements and weight Dimensions: 4,2 x 1,4 x 2,0 m Machine weight: 4200 kg Additional information & extras Core pull: 1 pcs
Key data: 500 kN
Injection molding machine Manafacture: Demag Type Extra 50-200 Year of construction: 2004 Machine has a defect, what exactly, I can't say. It is sold as a craft object.
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...
Manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Demag friction wheel type: RF180 -Barrier width: 120 mm -Payload: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg
Manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Transfer in current condition as seen -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Barrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -The trolleys are pushed into a steel beam -Payload: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg
Glass ruler, glass ruler, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display, linear encoder -Manufacturer: Sino Skantek, glass scale from injection molding machine Demag D 100-275 NC -Type: KA 200/1600 -Measuring length: 1600 mm -Dimensions: 1770/70/H35 mm -Weight: 3.3 kg
Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT
screw size:30 mm injection shot weight in Polysterol:94 g clamping force:600 kN screw size:30 mm max. swept volumne:106 cm³ injection shot weight in Polysterol:94 g/PS injection pressure:1.900 bar closing pressure:60 t tie bar distance:420 x 420 mm mould hight - min.:250 mm opening stroke:450 mm microprocessor control:NC4 screen text:deutsch Manual:deutsch robot interface:Euromap 12 core pull:1 x pump drive power:15 kW total connection power:23,2 kW total weight:3.900 kg :4,2 x 1,4 x 1,8 m payment: 100% prior to delivery
Description bi-injection press with satellite
clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...