used DELTA LF

Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls  ...

1 pot grinding machine Make: DELTA MODEL LC 400 Machine has very quiet running and is immediately ready for use DESCRIPTION Vertical Rotary Table Flat Grinding Machine Delta LC 400 Manufacturer Delta Model LC 400 Year of construction 1993 Condition very good(Used) Machine number: 93110 Dimensions length x width x height 800 x 800 x 1800 mm Weight: approx. 400 kg Specifications: Control: conventional Grinding range: Grinding diameter: approx. Ø 400 mm Grinding height: approx. 220 mm Grinding spindle: Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Grinding spindle – speed: approx. 2840 rpm Drive power: approx. 3.0 kW Driven rotary table: approx. 20 & 40 rpm Z – Delivery: manual Grinding movement: manual Accessories -Permanent – magnet Ø 400 mm -Coolant grinding device -Machine housing -Documentary Brochures -Grinding wheels – protect ...

Cold water heater Delta DK KWE Storage 700 liters My: 2017 -Cold water heaters from Delta bakery machines -Content 700 litres -without refrigeration compressor max. operating pressure 6 bar -max. operating temperature +95 C

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

* General * SKU284T648 * LocationBarneveld * MakeDelta * TypeDRFV 12 * No.1627 * Year of construction2012 * Pressure * Working pressure0.4 Bar * Main Features * MaterialStainless steel * Motor7.5 KW * Surface12 m2 * Specified Features - Roll dryer * Roll coolercheck * Roll surface12 m² * Roll sizesdia. 1900x2000 mm * Steam heatingcheck (tank) * Oil heatingcheck (tank) * Cooling mediumwater * With knife dischargecheck * Roll speed1-6 rpm * With jacketcheck (tank) * MaterialStainless steel * Information * Mounted on framecheck * With switchgearas is * Total height2,9 m * Weight7000 kg * CEcheck * Floorspace4x2,7 m * Extra Specificationswith: * filter with fan: CTI T.G.E. Ventilatori, Type: R 15 X, airflow: 840 m³ (Ex)Delta CostruzioniRoll dryersBrand > Delta CostruzioniDryers > Roll dryers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...

Water cooler Delta DKS 110 -220 volts -0.7 kW

Pot grinding machine Delta LF 350 14-10-045 Delivery time: immediately Number: 14-10-045 Machine data: Year of construction: approx. 2000 L x W x H: approx. 800 x 800 x 1800 mm Weight: approx. 400 kg Good general condition Specifications: Control: conventional Grinding range: Grinding length: approx. 360 mm Grinding width: approx. 155 mm Grinding height: approx. 280 mm Magnetic clamping surface: approx. 350 x 150 mm Grinding spindle: Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Grinding spindle – speed: approx. 2840 rpm Drive power: approx. 3.0 kW Z – Delivery: manual Grinding movement: manual Accessories -Permanent – Magnet -Wet grinding device -Machine housing -Operating instructions -Grinding wheels – protection -Pot grinding wheel -Various clamping wrenches Other accessories on request Price and other technic ...

Delta Vulcano 30/750 CNC punching machine Never used, it is sold for discontinued operations.

High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...

VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg

Delta Pack Flow Pack Horizontal Set up on granola bars Adjustable trigger and packaging length

Durchlauf - Schneidegatter, Fabr. Delta

Manufacturer: DELTA ELETONICS, INC., Model: 50TDS4W4C, Current (A): 50, Weight kg approx.: 3,

Heavy cable separation machine DeltaX 4010 technical data diameter cable: 18 up to 180 mm cutting speed: 32 m minute power: electric motor 11 kw / 380V dimensions (Lxwxh): 1880 x 1400 x 1560 weight: 1750 kg blade adjustment: hydraulic

Te Koop: Mono pomp R Moneau s patent Type CD901R Nr: 30/70/31347/3 Input: 100MM Output 165 MM 20 M3 / uu.

Blower - vacuum station drive: 7.5 kW, weight: 481 kg. Q 1 = 5.00 m ³/min, P K = 1,000 bar (a) = 6.18 kW, P1, P 2e = 0.500 bar (ü)

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

Machine

external diameter: 86 mm bore diameter in mm: 27 mm width: 95 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling Unit - Water Recooler Fabr DELTATHERM type RKV 2Sfrom a flame cutting machineFabr. -No: 3/3089, year of construction 1990Tank capacity approx: 120 lVoltage: 380 voltsElectricity: 7.5 ampsPower: 2.0 KWRefrigerant: R 22Weight approx. 165 kgOutside dimensions: 860 x 950 x 1820 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Industrial cooler , Operating overpressure 18 bar , Filling weight 2 kg , 230 V , 8.62 A , 1.65 kW , 50 Hz , Refrigerant R 134 a

* General * SKU900WP088 * LocationBarneveld * MakeDeltatherm * TypeHKG-W-50/12 * Main Features * Capacity30 KW * Information * Extra Specificationselectrical power: 30 kW cooling power ( -20°C ) 50 kW Cooling power ( -60°C) 7 kW, Medium:Therminol D12, manufactured 2012DeltathermTemperature control unitsBrand > DeltathermHeat exchangers > Temperature control units What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!