DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.
Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.
Lid FP2A D11! needed! FP 2A SK40 / with dialog 11 control Control: CNC dialog 11 - 3D contouring speed: 40-4000 RPM Feed: 2-3600 mm / min stepless Rapid traverse rate: 4 m / min Drive capacity: 1,6 / 2,0 kW 1400/2800 RPM Quill: Telescopic spindle vertical 80 mm SK40 with clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm round table: 3 axle universal rotary table 600 x 330 mm of Max load 250 kg Equipment: Hydro-mechanic clamping system SK40 with pull Stud DIN 2080. Vertical &amp; horizontal spindle,. Manually swiveling milling head +/-90 Â° Machine lamp Programming: DialoggefÃ¼hrte programming cycles. Options: E Handwheel / NC rotary table / dividing head, etc. On the machine were all drive motors renews geometry and wedge bars to manufacturer values set, all wear parts replaced, all discs replaced. Universal rotary table overhauled. The ma ...
Spindle speed 4000 RPM Dialog 11 control Toolholder SK 40 Feed power consumption approx. 10 kVA Weight approx. 1400 kg traverse path X / Y / Z 307 / 303 / 400 mm Accessories: dividing attachment, coolant system, Electr. Handwheel
DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg
Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L ...
x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC control DIALOG 11 Spindle speeds 31 - 5,000 rpm Spindle holder ISO 40 Table size 620 x 390 mm Table load 250 kg Feeds infinitely variable 2 - 6,000 mm/min Drive power 5.5 kW Pinole stroke 80 mm Coolant device Operating voltage 380 V Total power requirement 11.0 kVA Machine weight approx. 1.65 t Space requirement approx. 1.85 x 1.90 x 1.80 m Electrical cabinet 1.35 x 0.70 x 1.70 m Coolant box 1.00 x 0.45 x 0.20 m
Conventional milling machine DECKEL type FP 2 TECHNICAL SPECIFICATIONS: Number of axes: 3 X-axis stroke: 400 [mm] Y-axis stroke: 200 [mm] Z-axis stroke: 400 [mm] Fast travel speed X, Y: 1200 [mm/min] Fast travel speed Z: 1200 [mm/min] Stroke sensitive drilling head: 60 [mm] Table dimensions: 705 x 285 [mm] Vertical pin attachment: ISO 40 Adjustable vertical head: 360° Horizontal pin attachment: ISO 40 Mini speed. Pin: 40 [rpm] Maximum speed. Pin: 2000 [rpm] Pin power: 2.2 [kW] Number of spindle speeds: 18 Number of feed speeds: 18 Visualization: 3 axes Watering tray with pump: Yes Supply voltage: 380 [V] Weight: 1150 [kg] Machine dimensions: 1150 x 1250 x 1600 [mm] EQUIPMENT INCLUDED: X1 mortise head (stroke 80 [mm] - orintable +/- 90°) x1 counter-bearing + its bezel x1 vertical milling head x1 bi-rotating head (angle return) x1 fixed square table x ...
Condition: used very good, ready for immediate use Specifications: – Control: DIALOG 4 – Travel approx.: X: 300 mm, Y: 300 mm, Z: 400 mm – Table dimensions approx.: 620 x 390 mm – Tool holder: SK 40 – Weight approx. 1,600 kg – Transport mass approx.: L: 1.90 m, W: 1.50, H: 1.90 m -Accessories, documentation, vice and approx. 20 A SK40 mounts
Dialog 11 Control Speed range 40 - 4000 rpm Rapid traverse 4 m/ min Tool holder SK 40 Feed rate 2 - 3600 mm /min, infinitely variable Connected load approx. 10 kVA Travel X/Y/Z 300 / 300 /400 mm Working spindle vertically and horizontally Extendable quill 80 mm Milling head swivel +/- 90° Accessories: coolant device, electr. Handwheel Cabin with protective device ( When opening of the cabin door stops the milling spindle ). Very good original condition! The axes and milling spindle run quietly and precisely. Geometry in X/Y/Z axis 0.015/0.01/0.015 mm Spindle concentricity to 300 mm/0.012 mm Price: 8500,- EUR excl. VAT free loaded from warehouse Tirschenreuth
x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price
univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz
Why do you need an oil drip tray? Avoid large and expensive damage to your feed motor and the destruction of the drive amplifier. Here a brief explanation: Bed rail oil, which then drips down accumulates at 1. 2 Lands the oil accumulates in the cooling fins of the engine and continues on the way down. At 3, the oil eventually accumulates around then, fatally, after the feed motor to penetrate, which is destroyed as a result. High repair costs and a failure of the machine are the result. But it doesn't have to be. Simply mount the oil drip tray (at no. 2) on the motor (for the spindle drive). The oil drips now at 4 in the tray. Running at 5, the lowest point of the shell in there attached expiration. The oil makes its way through the hose 6 and is headed directly into the oil collecting tray of the machine 7. How to save costly repairs and down time of the machine.
Mechanical dividing head for E.g. FP1 and FP3 all parts complete!refurbished! and repainted Dividing head with the following accessories &amp; #9726;.Faceplate &amp; #9726;.Vise handle &amp; #9726;.Grease gun with a suitable attachment optional accessories &amp; #9726; three-jaw Chuck with key &amp; #9726;.Four-jaw Chuck with key
Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation