used DESMA 968

clamping force: 11000 kN injection volume: 12500 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: injection moulding machine for rubber - used, in very good condition machine was serviced annually by manufacturer clamping unit: - Euromap (size): 11000-25600 - clamping force: 11.000 kN - size of heating platens L/W/H: -- x -- x mm Injection unit: - Injection volume max.: 12,500 cm³ - Injection pressure: 2050 bar - Dosing force: 118 kN - Control: Siemens S7 - Connected load: 3x 400 V, 50 Hz, N - Total current: 276 A - Back-up fuse: 300 A - Pump drive: 277 bar - Driving power: 45 kW - Weight approx.: 43.8 t Operating hours approx.: 33,130 hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BRAND: KLOECKNER DESMA YEAR: 2010 MODEL: 968.250 ZO PRODUCTION HOURS: 27676 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 8000 KG CONTROL UNIT BRAND: DESMA MODEL: DRC 2010 INJECTION UNIT INJECTION PRESSURE: 1730 BAR CLAMPING UNIT CLAMPING FORCE: 2700 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HEATING PLATES SIZE: 630 MM X 560 MM - INJECTION VOLUME: 2000 CM3 - EJECTOR ON FIXED PLATE - EJECTOR ON MOVABLE PLATE - OPTIONS INCLUDED: 2 EJECTORS VACUUM PUMP QUALITATIVE MACHINE BENEFITS: - THE MACHINE IS IN VERY GOOD CONDITION AND READY FOR TESTS. FULL DOCUMENTATION AVAILABLE.

Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

DESMA 400 ton rubber injection molding machine -Model : SIGMA 4000

There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.

Klockner Desma 100ton Injection Press Model: D968.100.Z0 Plate size: 400mm deep x 500mm wide Stroke volume 350cm3 Clamping force 1000kN Injection pressure 2380 bar Voltage 3x 400 50Hz Year 1998

DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. Sn. 11-17706 We have 5 pieces of this machine and many more other machines from a shoe factory.

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.

Solenoid valve, directional control valve, UNIVER CM-9685 2.8 - 10 bar Connections: G1/4 ( inch ) without solenoid coils New ! Dimensions ( valve ): 225 x 48 x 26 mm

Filter cartridge, air filter insert CROSLAND 9684 30823 Diameter (outside): 265 mm Diameter (inside): 135 mm Diameter (lid): 320 mm, Bore: Ø 11 mm Height: 210 mm New ! Dimensions 340 x 340 x 280 mm

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

2 forklifts, Yale, 1,3 to., lifting height 9860 mm - used - : Price from location: only 3.500.-€ / piece (net), plus dismantling! Manufacturer: Yale Type: High Bay Stackers Model MTC 13 Year of construction 2013 Nominal load capacity at LSP 1.3 t Residual load capacity at max. lifting height of 9680 mm. At the time, this was offered by the factory with 600 kg. Overall height 6240 mm Lifting height 9860 mm Hours approx. 6200 and 5800h With Teletic With battery and charger The devices have not been charged for months and are unfortunately not roadworthy at the moment (possibly when the batteries are charged). Condition: used Available: now Location: NEUSS

MAN 0836 LE202 :Silkeborg 100 KW Engine type MAN 0836 LE202 Generator type Stamford UCI274E changed 2016 Gastype Biogas Year 2007 Runninghours total 85933 Runninghours after last ouverhaul 22000 Serviced regulary Yes Nissen Denmark Full service histori Yes Nissen Denmark Engine changed No ouverhouled Engine condition Extremly Good Engine still in operation Until 18/11 2019 Exhaurst heat exchanger Yes Radiator Yes Gasline Yes Silencer Yes Curkit breaker panel No Panelboard Yes Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 9500 euro

Jenbacher 208 (Thorsoe) Engine type Jenbacher 208 Generator type Stamford HC534 Gastype Naturalgas Year 1997 Runninghours total 138000 Runninghours after last ouverhaul 17352 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed No Engine condition Good Engine still in operation Yes Exhaurst heat exchanger Yes Jenbacher Radiator Yes Gasline Yes Silencer Yes Curkit breaker panel Yes Jenbacher changed in 2018 Panelboard Yes Diana Blue Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 22500 euro

TO WHOM WITH MAY CONCERN; WE HAVE 12 PCS NEW UNUSED WOODWARD LINKNET 6 CHANNEL MODULES AT OUR STOCK PLS FIND LIST WITH PART NUMBERS ON BELOW 9905 - 973 3PCS 9905 - 969 3PCS 9905 - 968 2PCS 9905 - 970 1PCS 9905 - 971 1PCS 9905 - 973. 2PCS PLS REFER SOME PICTURES ON ATTACHE . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Description Piovan dehumidifiers board DST01.V2s Piovan code 968D00901 from spare parts warehouse no disassembly

A quadroblock of Krones SUPERBOLCK is offered All machines are powered by cardio-shafts and please and a synchronous movement of the bottles. This achieves outputs of up to 37,000 bottles per hour. The system includes the following machines: Exhaust Rinser: Kom 560-002 Vacuum Filler: Kom 307-551 Shooter: SV 15 Etyma: Starmatic 24-8-8 Kom. 090-952 Bottle format: 20ml (can be adapted to customer requirements) Capacity: 7000-37000 bottles per hour Built: 1994 Plant condition: The system is completely overhauled Made in GERMANY For more information please contact us. Tel.: +49 6061 968 78 22 or email: v.gurin@allfill.de

Jenbacher 312 (FLJeppesen) Engine type Jenbacher 312 Generator type Stamford HC634 Gastype Biogas Year 2007 Runninghours total 75100 Runninghours after last ouverhaul 15000 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed No Engine condition Extremly Good Engine still in operation Yes Exhaurst heat exchanger No Radiator No Gasline Yes Silencer No Curkit breaker Yes Panelboard Yes Diane XT Batteries Yes 2 Charging unit Yes Pumps and pipes No Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 31.500 euro

A KRONES TRIBLOC is offered for rinsing, filling and sealing glass as well as PET bottles. Rinser 20 grippers Filler 20 valves ( pitch 222 mm ) Lock5 heads. ( PE thread closure) . Possible bottle sizes from 0.33 to 5 L . Built in 1998. Power 6000 Fl/h Before delivery, the machine is completely overhauled and adapted to customer wishes. For more information please contact us at: +49 6061 968 78 22 +49 176 725 19 609

Reference Num.: 3483 Brand: Perfecta Type: SEY 92 Construction year: 1978 Available: directly Status: In production Location: Deutschland Cutting Size: 920 mm Total weight: kg 1,800 / lbs 3,968 Equipment: - Lichtschranke - Seitentische - Lufttisch - Ersatzmesser