used DEMAG DC

2 x Demag Systec 420 / 820 - 2300 , year of construction / year 2006 , 31,000 h operating hours /running hours. Machines with few operating hours and very good condition / Machines with low runninghours and in good condition. - Screw diameter / Screwdiameter x 80 mm , shot volume / shot volume: 1.583 cm3 Extra Equipment / Extar Equipment : - Enlarged ejector plate lt Euromap / Enlarged ejectionplate according to Euromap. - 2 x air valves on movable clamping plate / 2 x pneumatic valves on movable platen. - 2 x air valves on fixed clamping plate / 2 xPneumatikvalves on fixed platen. - 2 x circuits for hydraulic core pull / 2 x circuits for hydraulic corepull. - 2 x connections for core pull to movable clamping plate / 2 x Connections for corepull on fixed plate.

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial * Screw diameter: 45mm * Tie bar spacing (H) & (V): 720 x 650 mm * Shot volume in cm3: 360 cc * Pressure on material: 2400 bar

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane   DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg

Injection moulding machine DEMAG Concept 350-710-1450 Stock No.: 503071 Manufacturer: DEMAG Type: Concept 350-710-1450 Control: NC4 Year of construction: 2003 Operating hours: 67681 h Technical data closing page Clamping force: 3500 kN Holmass v: 710 mm Holmass h: 630 mm Panel size h: 1040 mm Panel size v: 950 mm Installation height min.: 330 mm Installation height max.: 830 mm plate pitch max.: 1385 mm Opening distance: 675 mm Ejector stroke: 200 mm Ejector force: 69 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 3600 kg Technical data spray side Screw diameter: 60 mm Displacement: 763 cc Spray pressure: 1905 bar Screw length: 20 l/d Screw stroke: 270 mm Injection flow to the outside: 340 g/s hp Nozzle travel: 470 mm Dimensions & Weight Machine dimensions LxWxH: 6.5m x 2m x 2.3m Total weight: 15300KG Equipment ...

Key data: 1600 kN

Demag Ergotech Systec 160/520-430 with the Wittmann-Demag W721 robot / machine in very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 210 g Injection pressure: 2025 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 770x770 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Machine in very good technical condition Operating hours: in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Central lubrication Built-in printer Robot Wittmann-Demag W721 Year of construction: 2007 5-axis robots: 3 axes are driven by servo motors (electric); Axis C and Motion A Travels in axes: X-550, Y-1200, Z-2000  ...

Key data: 800 kN

Demag Ergotech Viva 800-310 / Machine in very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 35 mm Spray weight: 152 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in Demag sprue picker for removing molded parts Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3600 kg Length/Width/Height: 4.05x1.27x1.91 m Drive: Pumps/motor: 15 kW Heating capacity: 9.4 kW Total power: 24.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical  ...

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011

DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes

OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.

Crane system Electric crane Indoor crane Demag 250 Kg Chain hoist Crane crane crane You buy a self-supporting hall crane here. Manufacturer of the chain hoist Demag. Payload 250 kilos Hook height 245 cm Total height 352 cm Length 200 cm Width 300 cm All approx. information Further crane systems on offer The crane system has already been dismantled. We are rebuilding a complete plant.