used DEMAG 40

2 x Demag Systec 420 / 820 - 2300 , year of construction / year 2006 , 31,000 h operating hours /running hours. Machines with few operating hours and very good condition / Machines with low runninghours and in good condition. - Screw diameter / Screwdiameter x 80 mm , shot volume / shot volume: 1.583 cm3 Extra Equipment / Extar Equipment : - Enlarged ejector plate lt Euromap / Enlarged ejectionplate according to Euromap. - 2 x air valves on movable clamping plate / 2 x pneumatic valves on movable platen. - 2 x air valves on fixed clamping plate / 2 xPneumatikvalves on fixed platen. - 2 x circuits for hydraulic core pull / 2 x circuits for hydraulic corepull. - 2 x connections for core pull to movable clamping plate / 2 x Connections for corepull on fixed plate.

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

The swivel arm is in used condition and is fully functional. - Incl. bracket for wall mounting - Payload 125 kg Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.

Clamping force: 100t, screw diameter: 40mm, injection volume: 231cm³, length: 4350mm, width: 1400mm, height: 1900mm.

Crane motor, spare motor, electric motor, with brake, two speeds DEMAG KBA 80 A ( KBA80A ) 0,035 / 0,25 kW 400 / 1390 rpm 380 V 3AC 50 Hz Shaft diameter: Ø 19 mm Wavelength: 25 mm groove width: 6 mm Flange diameter: Ø 80 / 123 mm bolt circle diameter: Ø 100 mm 4x threaded hole: M6 x 1.0, depth: 10 mm used, tested ! Dimensions: 325 x 160 x 220 mm

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

Wall-mounted slewing crane DEMAG type KBK 2 Demag No. Boom: KBK-980 540 44 Demag No. Wall bracket : 85103944 Year of construction 2000 Load capacity: 250 kg Projection: 4000 mm Swivel range 270 Wall mounting plate: 760 x 380 mm Height UK boom to OK wall bracket: 630 mm Flange plate Wall bracket up to middle bolt: 260 mm Total length of flange plate Wall bracket up to cantilever tip: 4320 mm - Boom profile C-profile slide DEMAG KBK 2- Carriage for C-profile track DEMAG KBK 2 - Original paint yellow Weight: 150 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the shop.; used

DEMAG wall-mounted slewing crane type KBK 2 Demag No. Boom: KBK- 982 040 44 Demag No. Wall bracket : 85104044 Year of construction 2000 Load capacity: 500 kg Projection: 4000 mm Swivel range 270 Wall mounting plate: 1170 x 440 mm Height UK boom to OK wall bracket: 1000 mm Flange plate Wall bracket up to center bolt: 270 mm Total length of flange plate Wall bracket to cantilever tip: 4330 mm : - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile track DEMAG KBK 2 - Original paint yellow Dead weight 170 kg good condition Price without chain hoist - chain hoist or crane can also be found in the shop.; used

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane   DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg

Injection moulding machine DEMAG Concept 350-710-1450 Stock No.: 503071 Manufacturer: DEMAG Type: Concept 350-710-1450 Control: NC4 Year of construction: 2003 Operating hours: 67681 h Technical data closing page Clamping force: 3500 kN Holmass v: 710 mm Holmass h: 630 mm Panel size h: 1040 mm Panel size v: 950 mm Installation height min.: 330 mm Installation height max.: 830 mm plate pitch max.: 1385 mm Opening distance: 675 mm Ejector stroke: 200 mm Ejector force: 69 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 3600 kg Technical data spray side Screw diameter: 60 mm Displacement: 763 cc Spray pressure: 1905 bar Screw length: 20 l/d Screw stroke: 270 mm Injection flow to the outside: 340 g/s hp Nozzle travel: 470 mm Dimensions & Weight Machine dimensions LxWxH: 6.5m x 2m x 2.3m Total weight: 15300KG Equipment ...

Key data: 1600 kN

Demag Ergotech Systec 160/520-430 with the Wittmann-Demag W721 robot / machine in very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 210 g Injection pressure: 2025 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 770x770 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Machine in very good technical condition Operating hours: in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Central lubrication Built-in printer Robot Wittmann-Demag W721 Year of construction: 2007 5-axis robots: 3 axes are driven by servo motors (electric); Axis C and Motion A Travels in axes: X-550, Y-1200, Z-2000  ...

Key data: 800 kN

Demag Ergotech Viva 800-310 / Machine in very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 35 mm Spray weight: 152 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in Demag sprue picker for removing molded parts Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3600 kg Length/Width/Height: 4.05x1.27x1.91 m Drive: Pumps/motor: 15 kW Heating capacity: 9.4 kW Total power: 24.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical  ...

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min