used DELLA TOFFOLA PE

Country: Ukraine Year: 2012 Category: Process Technology Manufacturer: Della Toffola Model: NF 20 Availability: Immediately Overview The Kieselguhr filter was manufactured by Della Toffola in 2012. It was used in an Ukrainian brewery. Due to decreasing production volume, this filter is not used any more as they have other filters with smaller capacity. The filter has only been used for approx. 1000 hours and is therefore still in a very good overall condition. Tech Specs: Capacity: 600 HL/h Filter tank volume: 1,030 l Dosing tank volume: 240 l Centrifugal pump power: 11 kW Dimensions: Length: 2,650 mm Width: 1,500 mm Height: 2,850 mm Weight: 1,400 kg

Used Fossil Flour Filter Della Toffola NF 10 2012 Model NF 10 Year of construction 2012 Recently used Isobaric Voltage 400V 3 stages Frequency 50 Hz Full load current 15 A [...for more information send your inquiry to the seller.] ***refno: FLT08***

Used Fossil Flour Filter Della Toffola NF 15 2012 Model NF 15 Year of construction 2012 Recently used Isobaric [...for more information send your inquiry to the seller.] ***refno: FLT07***

Used Flour Filter Della Toffola 2012 Model NF 20 Year of construction 2012 Recently used Regular maintenance It has an output liter counter [...for more information send your inquiry to the seller.] ***refno: FLT06***

Used Della Toffola rotary filter in stainless steel, surface 20mq, model FVI20, new 2007. Complete of vacuum pump group, feeding pump, extraction pump. With motovariator for drum rotation. Automatic advancement system of the panel cutting knife. With stainless steel mixer HL 52 about. Electric control panel. Complete with use and maintenance handbook, wiring diagram and CE declaration. Filter dimensions: Length 5000mm X Width 2450mm X Height 2300mm about. Mixer dimensions: Ø2300 mm x Height 2700mm about. Pump group with electrical panel dimensions: 2200mm X 1800mm X Height 2500mm about. Total weight kg: 3420 about. 

Overview The Kieselguhr filter was manufactured by Della Toffola in 2012. It was used in an ukrainian brewery. Due to decreasing production volume, this filter is not used any more as they have other filters with smaller capacity. The filter has only been used for approx. 1000 hours and is therefore still in a very good overall condition. Tech Specs: Capacity: 600 HL/h Filter tank volume: 1,030 l Dosing tank volume: 240 l Centrifugal pump power: 11 kW Dimensions: Length: 2,650 mm Width: 1,500 mm Height: 2,850 mm Weight: 1,400 kg

Manufacturer: Della Toffola   Filtration area: 4.5 m2 Drum dimensions: ? 100 x 150 cm Stainless steel frame on wheels Vacuum pump: Travaini TRMA 40-150/F Drum speed control: mechanical Electrical cabinet / control panel Mixing tank

offered without plates. Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm More then 300 machines new and second hand on our seema .de

filtration surface (sqm): 20 discharge of vessel: automatic discharge operating pressure (bar): 12 electrical power supply kW: 27 weight [kg.]: 1.5 volume of vessel (ltr): 1040 More then 300 machines new and second hand on our seema .de

* General * SKU302M513 * LocationBarneveld * MakeDella Toffola * Year of constructionUnknown * Main Features * MaterialStainless steel * Motor0.55 KW * Surface25 m2 * Specified Features - Rotating vacuum filter * Rotating vacuum filtercheck * Filter surface25 M2 * Drum sizesdia. 1600x5000mm * Motor+/- 0,55 KW * With knife dischargecheck * Mechanical operatedcheck * Motorcheck * With liquid pumpcheck * MaterialStainless steel * Information * With switchgearcheck * Floorspace6,5x2,8 M * Total height2,2 MDella ToffolaRotating vacuum filtersBrand > Della ToffolaFilters > Rotating vacuum filters What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The basic unit includes following modules (standard equipment): ï?  Compact and stable design in modular design ï?  All feeding systems that ensure an optimal product handling, are adaptable ï?  Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï?  Wear-free, infinitely adjustable, patented tension system ï?  Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï?  Mechanical locking of the clamping bar, this precise slide clamp and sealing ï?  Product protection by security monitoring via light barriers in the Clamping range ï?  Switching and Pneumatics Cabinet integrated into the machine ï?  Clamping unit, servo motor ï?  Main slot servo ï?&nbs ...

The basic unit includes following modules (standard equipment): ï?  Compact and stable design in modular design ï?  All feeding systems that ensure an optimal product handling, are adaptable ï?  Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï?  Wear-free, infinitely adjustable, patented tension system ï?  Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï?  Mechanical locking of the clamping bar, this precise slide clamp and sealing ï?  Product protection by security monitoring via light barriers in the Clamping range ï?  Switching and Pneumatics Cabinet integrated into the machine ï?  maintenance-free and oil-free operation Technical data: ï?  Control right ï?  Control Panel of Lauer PCS (standard)  ...

The basic unit includes following modules (standard equipment): -Compact and stable design in modular design -All feeding systems that ensure an optimal product handling, are adaptable -Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator -Wear-free, infinitely adjustable, patented tension system -Wear arm seal system by steel seal bars with more accurate Temperature monitoring -Mechanical locking of the clamping bar, this precise slide clamp and sealing -Product protection by security monitoring via light barriers in the Clamping range -Switching and Pneumatics Cabinet integrated into the machine -Maintenance-free and oil-free operation Technical data: -Operating side right -Control Panel of Lauer PCS (standard) -Control Siemens S7/300 with CPU 314 -Packaging  ...

Description Complete multilayer Pex-Al-Pex pipes Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

• For single and multiple packs • 90° infeed conveyor with stacking device, max. product width 200 mm • Format range insertion max. (w x d x h) 450 x 250 x 250 mm • For PE film, film width 30 - 450 mm, film thickness 20 - 100 µm • Roll diam. max. 300 mm, core diam. 79/76 mm • Seal width max. 450 mm • Output max. 24 cycles/min, depending on the format • Shrink tunnel passage width max. 450 mm, height max. 250 mm • Control panel Lauer PCS 095 • PLC Siemens S5-95U • Enclosure with safety switches • Connection 400V/50Hz/8,5kW

High performance cartoning machine C 305 Technical data C = cartoner 3 output = 350 folding cartons / min in continuous operation 5 = 5 "chain pitch Complete Servogesteuert Operation via 19 "HMI touch panel Code reader brochure folding Folding length: 65-150 mm Folding carton width: 30-105 mm Carton height: 15-75 mm output: 350-400 folding cartons / min Product supply via supply chain with cell angles: item height: 600 mm Processing height: 900 mm Brochure feeding: GUK Cartonac 2000 Encoding (right, left) 1 … 4 line with ink roller Electrical connection value: 230/400N-N/PE â?? 50 Hz Power supply: 11KVA (without hot glue and blister stacking) Weight: approx. 4500 kg Ground clearance: 150 mm Length: 7500 mm (incl. product feed) Width: 1900 mm Height: 2000 mm (1200 mm in the processing room)

Sell large items Kentron quadrant 1000 PEEK. Material comes from corporate insolvency, in stock. Different batches. Delivery possible, shipping costs on request. Payment in advance. The post includes: Round material length 1000 mm each. 3 piece diameter 20mm 3 piece diameter 25mm 4 piece diameter 30mm 4 piece diameter 40mm

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

I have for sale, pellet production line based on Germany pellet Mill Münch RMP 520, The line is UNIWERSAL! To biomass of wood sawdust or straw pellet! Capacity up to 2 tons/h. Line build in 2012. Line has majority automatic process. Complete line from A to Z. From raw (moist sawdust or straw) to the finished pellets 15 kg bags, big bags or luz. Unfortunately company is stop and can’t look In working condition because there no electricity power enough. In this price I can help to dismantle line, only under YOUR supervision and load on the trucks. I can help to organized transport to your place. I can find a competent person who will start line in your company. The line contains: Complete Dryer: - Belt feeder for moist sawdust - Stove - Automatically feeder for stove - Drum - Cyclones and the jets for dryer Milling parts: - Belt feeder straw for Roto grind - Ro ...

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

1. Preform Box tipper Built: 2007 2. Blasmachine Blomax 8 SIG/KHS Built: 2006 3. Mixer Paramix KHS Built: 2002 4. Fuller Smanazzi 70-15 Built: 2009 5. Rinser POFAMIA Built: 1997 6. Labeling machine Krones Contiroll 720-12 Built: 2003 7. Shrink tunnel ACMI Fenix Built: 2007 8. Carrying handle aplicator Twinpack Built: 2010 9. Palletizer ACMI Built: 2008 10. Pallet winder ACMI Built: 2008 11. Conveyor belts

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

Unscrambler LanFanchi for PET Bottles 12 000 bph Complete never installed PET bottle unscrambler system made by Italian LanFranchi in year 2005 - still in original delivery boxes. It is designed for 8 oz (0.237 liters), 20 (0.591 liters) and 33.8 oz (1.0 liters) PET bottles with the production capacity of 12000 bph. The delivery includes complete unscrambling system as follows: Rotating Unscrambler - Model Lift Master L1 STD 20-22 - Superior opening cover - Vacuum Transfer star wheel at machine exit - Speed control photocells at machine exit - Electrical control cabinet in stainless steel with A/B components and UL certified - No.1 set of handling parts for 0.237 and 1,0 l bottles and an adapter set for 0.591 liter Bottle elevator for the in-feed of bottles to the superior part of the unscrambler. Elevator built in stainless steel AISI 304. Complete with supporting legs ...