We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...
used
SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996
used
Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...
used
– Italian production – year of manufacture 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines feed motor 3 kW height adjustment motor 1,1 kW disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power 94 kW feed adjustment on the inverter automatic central lubrication minimum element length 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection latches shaft position indicator connection diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (L/W/H) 240 / 235 / 210 cm weight ~ 6000 kg
used
Grinding and calibration line COSTA Levigatrici CCT CCT 1150 Technical specifications: Max workpiece width, mm: 1150 Max thickness of the workpiece, mm: 120 Feed rate, m / min: 5-20 Overall dimensions, mm: 5000х3000х2800 Power, kW: 139 Weight, kg: 11000 Machine for bottom grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe, Machine for top grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe,
used
SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet
new
Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
new
Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...
new
Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...
new
Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...
used
Description: Manual plane positioning Double advance speed 400 mm plane Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,000 mm, weight approx.: 400 kg
used
Description: Mod. 70 Equipped with 3 rollers. Working length: 1150 mm. Workpiece passage section: 170 mm Also equipped with: Perforated belt Depressor Scotch brite roller Outfeed rotary blowers Approx. Onsite Dimension. (l x w x h): 1,600 x 2,900 x 2,400 mm, weight approx.: 2,500 kg
used
This COSTA CCCC 600 Deburring machine was manufactured in the year 2008 in Italy.
used
Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003
used
Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999
used
mit neuem Vakuum Transportband. With new vacumm transportbelt. - Producer Costa - Type S3 CTT 1350 - Year of construction 2003 - Max. part height 3 - 160 mm - 1. Unit - Length belt - Sanding roller ~ 70 Shore - Measure sanding belt 2620 x 1380 mm (1350) mm - 2. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - 3. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - Distance follower roller 32 mm - Width, segmented sandingbeam 32 mm - Operating side, right - Aggregate height adjustment - Vacuum transport belt - Total connection power 103 A / 48 kW - Voltage / HZ 400 / 50 - Commodity code 84659300
used
- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %
used
- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %
used
Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011
used
Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,
used
Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995
used
Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999
used
Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007
used
Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993
used
Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999
used
Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999
used
Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999
used
Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999