BOSCHERT used machine for sale

Key data: 25 t, 3000 mm, 500 mm

For cannibalization I offer a powerline 25-500, built in 1985, which works until the end Machine can no longer be tried; already partially dismantled. In 2017 both servo cards were new! Invoice available

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

- Cutting length: 220 mm - Capacity: 4 mm - Cutting angle: 90 ° - Required power : 2.2 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 850 x 1100 x 1100 mm - Weight: approx. 600 kg

BOSCHERT COMPACT 1250 ROTATION-INDEX punching machine was manufactured in 2014 in Germany. The machine, used in precision nibbling, punching and stamping of workpieces, is characterised by excellent stability and rigidity even during demanding series machining. Workpieces with a maximum thickness of 10 mm are machined with a force of 28 tonnes on a large brush table, protecting sheet metal surfaces from scratches and scrapes. The punching tool head is equipped with a ROTATION tool station drive, which smoothly rotates each punching tool in a range of 360°, guaranteeing fast and trouble-free machining of even the most complex shapes. The punching machine is also equipped with a BOSCHERT einfach besser TFT control panel with an intuitive BOSCHERT CNC 32050 CNC controlle for programming machining modes and controlling the machine operation. The total weight of the machine is 8400 kg.  ...

sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle between 30 and 120 degrees Weight: 1.000 kg

offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

20pc. Borschert Breake in very good condition usable for Win-up or Let-off by AuMA / Rotocure, Calender, for shaft 60 x 60mm

Max. workpiece thickness: 20mm, including one unused and originally packed set of blades.

Technical details on demand.

plate thickness:3 mm total power requirement:4 kW weight of the machine ca.:0,85 t dimensions of the machine ca.:1,2 x 1,0 x 1,1 m Notching machine hydraulic

This Boschert Twin 1000 Index Punching machine was manufactured in the year 2004 in Germany. It is equipped with a Boschert CNC 32050 control unit and has 2 axis. The machine has a punching force of 280 kN.

This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.

Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine has: -3 punching heads with quick-change tool system -fast tool change -2 sheet clamps - use of all types of punching and forming tools of the Trumpf standard - X-axis 0-3000 Y-axis 0-1250 - positioning speed of the axes 60 meters per minute, positioning accuracy 0.05 mm -automatic height adjustment of the tool stroke Specifications: punching force - 28 t adjustable height of striker stroke - for one stroke 105 mm maximum punching diameter - 90mm maximum thickness of the processed material - 6 mm

BOSCHERT Ecco Line EL-500-Digital punching machine The BOSCHERT Ecco Line EL-500-Digital punching machine was built in 2007 in Germany. Machine with a punching force of 28 t and a maximum of 180 strokes per minute, punching in sheets with a maximum thickness of 6 mm. The machine is equipped with a working table with dimensions (W x L) 500 x 1000 mm. The total weight of the punching machine is 2 tons

sheet width: 500 mm plate length: 1000 mm plate thickness: max. 6,0 mm pressure: 28,0 t throat: 500 mm height of stroke: 0 - 40 mm working area: X = 1200 mm working area: Y = 570 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm work height max.: 900 mm oil volume: 50 l total power requirement: 4,0 kW weight of the machine ca.: 2500 kg range L-W-H: 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y p ...

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion ...

pressure: 75,0 t chamfer lenght: 2620 mm distance between columns: 2055 mm column arm: 400 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 90,0 mm/sec stroke: ~ 140 mm dayligth: ~ 360 mm table height: 930 mm table width: 85,0 mm Control: ELGO P8822 oil volume: 150 ltr. engine output: 7,5 kW weight of the machine ca.: ~ 6.500 kg. range L-W-H: 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible - Electro-motor backgauge - X axis Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lat ...

plate thickness: 4 (St 40) mm plate thickness: 3 (VA) mm cutting angle adjustment: 30 - 120 ° cutting length: 200 mm throat: 300 mm table height: 900 mm working stroke: max. 40 mm no. of strokes: max. 40 Hub/min hole punching press: throat: 300 mm Punch power: 125 kN punch diameter: max. 105 mm total power requirement: 4 kW weight of the machine ca.: 2,0 t dimensions of machine L x W x H: 1,5 x 1,3 x 1,38 m = hydr. notching machine with hole punch Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic,  ...

Year: 1989 angle stop: 30 -120 Grad good condition: . : Anschlag weight: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 6,00 mm Knife length: 200 mm Notching machineBOSCHERT - K30-120 MACH-ID 7610 Make: BOSCHERT Type: K30-120 Year: 2002 Max. cutting length:           200mm Maximum sheet thickness:       6mm Cutting angle fixed or variabel:Variable Number of down holders:        4 Length:                        1500mm Width:                         1200mm Height:                        1300mm Weight:                        1600kg

30° gt; 120° cap steel: 6 mm cap stainless steel: 4 mm Capacity : 200 x 200 x 6 mm Fixed angle -- variable angle: variable (30° > 120°) Workspace: 710 x 570 mm Length : 1400 mm Depht : 800 mm Height: 1100 mm Weight: 1550 kg

vertical adjustment: 150 mm working area: 400 x 150 mm 2825 rpm Dia ceramic grindstone: 175 mm Motorpower: 2,2 kW Length : 800 mm Depth: 520 mm Height: 1300 mm Weight: 160 kg

sheet width: mm plate length: mm plate thickness: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becom ...

control panel: Boschert Stanze Year: 1990 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic notching machine make BOSCHERT type K 30-180 / CNCYear of construction 1989for latches of all angles from 30 ° to 180 °Cutting capacity steel ST 40: 4 mmCutting capacity stainless steel: 3 mmKnife length: 200 mmCutting length: 200 x 200 mmCutting angle adjustable: 30 - 180 °Table height: 900 mmelectrical connection value: 8 KVAHydraulic oil filling: 30 litersExternal dimensions L x W x H: 1500 x 1000 x 1930 mmWeight: 1950 kgwithout stoppersWith- Control PC 2000 for setting the cutting angle- automatic execution of the entered programs- high travel speed from one angle to another- ideal view on knife tip- easy to catch on crack- ideal for catching beveled sheets- Latches of different angles on a sheet without clipboard- Pawls from aluminum to stainless steel with the same knives- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading ...