BAYKAL used machine for sale

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

sheet width: 2560 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 2600 mm down holder: 12 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: ELGO TYP 71 back stop - adjustable: max. 750 mm total power requirement: 11.37 kW weight: 3800 kg range L-W-H: 3030 x 1910 x 1510 mm Current new price approx. 37.000 euros Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit Driving back stop x = 750 mm play -free ball circuit spindle for back attack Speed 100 mm/sec - 1x side stop with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on  ...

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2550 mm total power requirement: 11 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m motorized arrester tools Technische Daten / technical details: Druck / pressure 160 to Abkantlänge / bending lenght 3100 mm Durchgang zwischen den Ständern / distance between columns 2550 mm Ausladung / overhang 310 mm Antriebsleistung / drive capacity 11 kW Gewicht / weight 8500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mm plate thickness: 8.0 mm thickness at Niro-steel: 6.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 10 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Number of working hours: ca. 2.100 h back stop - adjustable: 6.0 - 750 mm Control: total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm from a maintenance workshop hardly used - only approx. 2.100 operating hours () New price approx. 40.000 euros Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Back gauge beam can be automatically tilted up to maximum position for pushing extra long sheets through Travel speed 100 mm/sec - 1x stable side stop with T-slot, flip stop and millimeter sc ...

Electrically adjustable back gauge Manual cutting angle adjustment Light screen protection at the front and rear 1348 power hours

Capacity: 3100 x 8mm Electric Elgo NC back gauge good condition inspection possible

Capacity 3100 x 160 tons Delem DA-66T Touch control Y1, Y2, X and R axis CNC controlled Akas Fiessler laser safe CNC Bombing Amada / Euroclamming Includes set of tools Including front supports �

Capacity 200x200x4mm Variable angle adjustment Knives in good condition

Baykal APH 31120 NC Press Brake Bending length : 3100 mm 120 Ton Machine is in very good condition

This Baykal HNC 8116 Shearing machine was manufactured in the year 2014 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit.

This BAYKAL BLS-NL 2060 4kW Laser cutting machine was manufactured in the year 2014. It is equipped with a Beckhoff CNC control unit. The machine has a laser power of 4 kW as well as a max. load capacity of 4450 kg. See PDF (EN) with technical benefits attached below.

Baykal HGL 3100x6 NC Guillotine Shear Cutting length : 3100 mm Cutting thickness : 6 mm Machine is in good condition Can be sold together with following press brake : https://www.exapro/durma-ad-r-30100-p230110114/

NEW MACHINE – READY FOR INDUSTRY 4.0 ESA S640 CNC control Cutting length mm 3070 Nominal thickness mm 10 Frontal protections with photocells Pneumatic sheet support Cutting thread Cutting angle adjustment 0.50° – 2.00° Rear register stroke mm 1000 Shots at 1 minute 12-18 Main engine power kW 22 Approximate weight 11000 kg Use and maintenance manuals

NEW MACHINE – READY FOR INDUSTRY 4.0 ESA 640 2D CNC control – 4 axes Y1 – Y2 – X – R Maximum pressure Ton. 200 Useful bending length mm 3100 CROWING CNC crowning table N. 2 front supports Machine equipped with ROLLERI tools Passage between uprights mm 2550 Recess depth mm 410 Light mm 530 Stroke mm 260 Approach speed mm/sec 150 Working speed mm/sec 10 Return speed mm/sec 130 Main engine power KW 19 Table width mm 90 Use and maintenance manuals

Baykal APH 3100 x 200 NC Press Brake Tools are included Machine is in good condition

Baykal APHS 31120 CNC Press Brake Machine is like new Folding length : 3100 mm 120 Ton Number of axis : 4 Delem control unit Machine is not used on material more than 1 mm thickness Tools are included

sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: DAC 310 total power requirement: 11.0 kW weight: 5450 kg range L-W-H: 3800 x 1940 x 1560 mm Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - ...

Baykal APHS 31120 CNC Press Brake Bending length : 3100 mm 120 Ton Delem control unit Machine is in excellent condition

Baykal HNC 6100x16 NC Guillotine Shear Maximum cutting length : 6100 mm Maximum cutting thickness : 16 mm Machine is in good working condition

pressure: 180 t chamfer lenght: 3700 mm distance between columns: 3250 mm throat: 270 mm stroke: 220 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 395 mm table width: 200 mm work height max.: 870 mm oil volume: 210 ltr. total power requirement: 15,0 kW weight of the machine ca.: 12100 kg. range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop () Furnishing: - conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V u ...

pressure: 90,0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 80,0 mm/sec back stop - adjustable: ca. 725 mm stroke: 120 mm dayligth: 475 mm table height: 860 mm oil volume: 130 ltr. total power requirement: 11,0 kW weight of the machine ca.: 5500 kg. good condition () Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe f ...

sheet width: 3060 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm back stop - adjustable: 5,0 - 1000 mm work height max.: ca. 820 mm cutting angle: 2,4 ° stroke: 7-12 p/min. down holder: 14 Stück operating pressure: 360 bar Control: ELGO oil volume: 200 ltr. voltage: 400 V total power requirement: 22,0 kW weight: 9000 kg range L-W-H: 4000 x 2300 x 2000 mm Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm zero-backlash ball screw for backgauge Backstop beam can be automatically tilted up in max. position Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - ...

Baykal APH 30180 NC Press Brake Machine is in good working condition 180 Ton Bending length : 3000 mm

We have used Baykal HNC 8116 CNC hydraulic guillotine shears for sale. The shears have a cutting length of 8060mm and the maximum sheet thickness is 16mm The machine was purchased as new and has been working with us since 2014. During this period, the machine was not very usable, we mostly used it to cut sheets with a thickness of 3-8 mm. The meter reading is 3515h Below are some basic information • Welded steel structure providing the necessary rigidity and durability • CYBELEC CNC control with the possibility of programming the bumper, the number of cuts, the cutting angle, the gap between the blades; • Motorized rear bumper driven by a ball screw with a tilting function to enable the cutting of oversized sheets • Protection of the operators fingers from the front of the machine • 1000 mm long front supports • Side recess in the 350 mm frame †...

It is possible to convert the machine to CNC Y axis has NC control Machine has tools It is possible to inspect the machine in Istanbul

Pusher servo with opening 1100 mm Pusher speed - up to 200 mm/s Control - CNC - DNC 60G HNC 4120 Cutting length 4 070 Cutting thickness – 45 kg/mm² Cutting thickness - steel 20 mm, stainless steel 13 mm Cutting angle (degrees) 0.5°-3.0° Number of cuts 6-9 cuts/min Number of clamps 21 pcs. Back gauge working range 1,000 mm Hydraulic volume 400 l Main motor 37 kW Back gauge motor 0.55 kW Dimensions 4570 mm, 2350 mm, 2900 mm Weight 26,000 kg

Bending length : 3100 mm 120 Ton Delem Control Unit Servo Working hour : 11.000

Baykal HNL 3100x10 mm CNC Hydraulic Guillotine Shear Adjustable angle Cutting length: 3100 mm Maximum cutting thickness : 10 mm Machine is in good condition

Working length mm 3100 Force, t 120 The speed of the bending beam, mm / sec. Approach / Stroke / Return 160 \ 10 \ 130 The course of the bending beam along the axes Y1-Y2, mm 260 Accuracy along the axes Y1-Y2, mm ± 0.01 X axis travel, mm 750 Accuracy of movement along the X axis, mm ± 0.03 R axis travel, mm 160 Accuracy of movement along the axis R, mm ± 0.05

Baykal APHS 31120 CNC Press Brake with 620 hours! Machine is in excellent condition Working hour : 620 Control Unit : CYBELEC ModEva 15T Motorized crowning