BOEHRINGER used machine for sale

with CNC control, Fabr. SIEMENS, type: 840, max. 2000 rpm, max. circulation diameter: 640 mm, max. turning diameter: 500 mm, max. turning length: 1300 mm, spindle passage: 60 mm, with three-jaw chuck, Fabr. FORKARDT, diameter: 315 mm, coolant device and quick release system

Key data: 500 mm, 1000 mm, 2500 1/min

with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D, drive power: 32 kW, turret with 12 tool positions, max. speed: 2500 rpm, number of axes: 3, max. circulation diameter: 500 mm, max. turning diameter: 500 mm, max. turning length: 1000 mm, C-axis: 360 degrees, spindle passage: 90 mm

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Ref.No.00806 Name of the lathe Manufacturer: Böhringer Model VDF DUE 560 Year of construction 2005 Control Heidenhain Manualplus 4110 Swing Above the bed 570mm Over the long face slide 365mm In the bed recess 600mm Reliable workpiece weight for normal main spindle Without the use of sticks 500kg For a setting vise 630kg With two setting vices 800kg Main spindle speeds number 24 With normal main spindle 11.2... 2240 min-1 Step jump 1.25 Commuting Face slider 345mm Upper slider 125mm The tailstock quill 190mm Dimensions Tip height over flat track 280mm Electric drive 15 kW Repair A casting was broken in half, customer has repaired it himself with his own means, so that it works perfectly again Condition under power technically ok Documentation In German - Paper-bound Submission date expected August / September 2024

Jaw crusher Böhringer Inlet opening: 800 x 200mm Propulsion: electric motor 30 kW

NDT lathe - Böhringer Type VDF 400 Spindle 600-440 mm maximum length 2000mm Tool magazine with 12 tools

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER Designation: Stepped grate Grate length: 2,000 mm Grating width: 1,100 mm Design: heavy Grate gap/screening at: 120 mm Number of gradations: 3 SPECIFIC COMMENT - Incl. drive - Incl. swing frame and springs

Control VDF B2T Turning length 2000 mm Turning diameter over bed 420 Turning diameter via Support 350 Turning diameter via tailstock 350 Power 36 KW Spindle bore 75 mm

Impact mill Böhringer RC12 Brand: Böhringer Type: RC12 Inlet opening : 1250 x 1000 mm Drive : Electric motor 100 kW

Screening machine Böhringer 6000 x 2000 mm - 1 decker

Screen area: 1,300 x 4,000 mm Upper deck: 90x90mm square mesh Lower deck: 15x15mm quad rat mesh optional: radmobil on trailer with outlet chute and discharge belt

Inlet: 1,440 x 900 mm Rotor diameter x width: 1,250 x 1,420 mm new wear lining

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER (Germany) Name: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive line: 200 kW Drive type: V-belt Throughput: 200 - 300 t/h Inlet opening (width / height): 1,330 mm / 1,500 mm Maximum task size: approx. 1,000 mm Number of impact strips: 3 pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm TECHNICAL SPECIFICATION Manufacturer: BÖHRINGER (Germany) Description: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive power: 200 kW Type of drive: V-Belt Throughput: 200 - 300 t/h Feeding opening (width / height): 1,330 mm / 1,500 mm Feeding size: approx. 1,000 mm Number of rotor ledges: 3 Pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm

Inlet: 1080 x 1000mm Rotor: 1000 x 1060mm Weight: about 11.5 t. Interior armour renewed

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

2-deck, screen size: 5,000 x 1800 mm, with ball-cleaning application, with new main frame, sand-blasted and new painted

Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders.

Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.

Center height: 265mm, center distance: 1500mm, rotational speed: 9-1800/min, swing over bed/ crank: 550/ 750mm, connected load: 18.5kW, length: 4100mm, width: 1900mm, height: 1900mm, weight: 3.9t.

Center distance: 1500mm, swing over bed slide: 145mm, center height: 245mm, with copying device and documentation.

CONTROLS   CNC Teach In Controls NUM 1062 BASIC FUNCTIONS   number of x/z slides: 1   live positions: no WORKING RANGE TURNING   swing diameter (max): 570 mm   turning diameter (max): 365 mm   worpiece length max.: 1000 mm MAIN SPINDLE   spindle revolutions (min): 3 /min   spindle revolutions (max): 2500 /min   number of gears: 2   spindle diameter: 62 mm X/Z SLIDE   traverse velocity Z (min): 0 mm/min   traverse velocity Z (max): 10000 mm/min   traverse velocity X (min): 0 mm/min   traverse velocity X (max): 5000 mm/min   tool fixture: Steel Holder TAILSTOCK   taper: MK 5 ELECTRICAL SPECIFICATIONS   mains power supply: 35 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS  ...

CONTROLS   CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS   number of spindles: 1 WORKING RANGE TURNING   swing diameter (max): 420 mm   worpiece length max.: 1130 mm MAIN SPINDLE   spindle revolutions (min): 10 /min   spindle revolutions (max): 3000 /min   spindle bore diameter: 51 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1250 mm   total height: 1650 mm   total weight approx.: 3500 kg Machine rarely used Furnishing: - 3 jaw chuck D210 - 4 compartments ready change holder

turning diameter: über Bett 420 mm turning length: 3000 mm control: Fabr. Fanuc Typ: 15-TA : 1114.3494-24 turning speeds: max. 3550 U/min power chuck: spindle bore: 52 mm tail stock: : hydraulisch : chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:570 mm turning length:1000 mm dimensions of the machine ca.:3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available

Description: Including faceplate, multifix base holder, tailstock, digital display Drehlänge: 549 mm, turning diameter over bed: 740 mm, turning diameter over slide: 540 mm, spindle bore: 130 mm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 800 x 2,000 mm

Description: Including 3-jaw chuck, multifix base holder, tailstock Drehlänge: 2,000 mm, turning diameter over bed: 640 mm, turning diameter over slide: 440 mm, spindle bore: 85 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,100 x 1,700 mm

serial number: 1022 2243-03 centre distance: 1500 mm : 560mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Rotation diameter over bed 570 mm, over facing slide 365 mm, bed width 360 mm, main spindle head size 8, spindle diameter in front bearing 100 mm, spindle bore 62 mm, inner taper of main spindle 70 mm, main drive 19/15 kW, torque at 60 % 1800 Nm, at 100 % 1400 Nm, total speed range 3 to 2500 rpm, max. feed speed flat 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed rate 5 m/min, max. feed speed planar 5 m/min, longitudinal 10 m/min, thread pitches metric thread 0.1 to 400 mm, tailstock quill diameter 80 mm, quill stroke 190 mm, quill taper MK 5, centre angle 60°, max. turning length 1500 mm, control SIEMENS SINUMERIK 810 Approx. Onsite Dimension. (l x w x h): 3,000 x 1,800 x 1,900 mm, weight approx.: 3,500 kg

Description: Rotation diameter over bed 500 mm, over face slide285 mm, in the bed recess 540 mm, length of bed recess 165 mm, permissible workpiece weight with 2 set pieces 800 kg, speed range 11.2 to 2240 rpm, feed length 0.063 to 56 mm, flat 0.0315 to 28 mm, working stroke face slide 345 mm, top slide 125 mm, tailstock quill 190 mm, centre height over flat track 240 mm, bed width 360 mm, digital readout HEIDENHAIN, turning length 1000 mm weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,600 x 1,700 mm

Description: Rotation diameter over bed 640 mm, over the long facing slide 385 mm, in the bed recess 700 mm, permissible workpiece weight with 2 setting pieces 2500 kg, speed range 9 to 1800 rpm, working stroke facing slide 44 mm, top slide 165 mm, tailstock quill 280 mm, centre height over flat track 315 mm, bed width 450 mm, turning length 2000 mm weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,200 x 2,000 mm