used AMBOLD EVSP 55

Stroke: 45mm, weight: 3.5t.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min force: Dauerlauf 1765 J dayligth: 302 max mm dayligth: 100 min mm adjustment of stroke: 8-84 mm ram adjustment: 55 mm ram surface: 185 x 180 mm ram hole: 40 H7 mm force: 3530 J hole in the table: 210 x 170 mm width of T-slots: 22 mm connected load: 3,5 kW rated current: 9 frequency: 50 Hz voltage: 380 V weight of the machine ca.: 2700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 1 - 50 mm table-size: 400 x 300 mm ram adjustment: mm no. of strokes: 60 Hub/min : mm throat: mm total power requirement: 1,2 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,2 x 1.2 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 350 mm stroke: 20 - 120 mm table size: 1100 x 700 mm ram head dimension: 750 x 450 mm ram adjustment: max. 90 mm no. of strokes: 70 Hub/min strokes - infinitely variable: 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above: 500 mm hole in the table: 400 x 300 mm hole in bolster plate: 220 x 180 mm Breakthrough in column back: 450 x 300 mm total power requirement: 11 kW weight of the machine ca.: 11,8 t dimensions of the machine ca.: 2,1 x 1,3 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decorative holding card TMCC

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

-Die BBS 550 ist ideal zum Schneiden von weichem, hartem, trockenem oder gefrorenem Holz bzw. Holz-Prismen  mit einer Länge entsprechend der Maschinenkonstruktion. -Die max. Schnittlänge ist abhängig von den Verlängerungselementen -Alle Holzarten können mit dem gleichen Sägeband geschnitten werden. -Robuste und schwingungsfreie Konstruktion -Minimaler Wartungsaufwand -Einfache Bedienung Massive Präzisionsgusslaufräder -Präzisionsführungen -Excenterspanner -Vorschneiderschwenkmechanik -Manuelle Schnitthöheneinstellung -Manueller Vorschub -Geliefert mit 4,6 m Rollbahn Technische Daten: - max. Stammdurchmesser: 550 mm - max. Brettbreite: 530 mm - max. Sägebandhub: 20 mm - max. Schnitttiefe: 220 mm - Schnittlänge Grundversion: 3,7 m - Verlängerungssektion: 2,3 m - max. Schnittlänge: unlimitiert - min. Schnnittlänge: 0,9 m - Motorleistung Antriebsrad S1 (100%) / S6: 4 kW / 5, ...

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

- Brikettdurchmesser 50 mm - Durchsatzleistung 30-50 kg pro Stunde , Materialabhängig - Schaltschrank mir SIEMENS SPS-Steuerung - Motor Hydraulikpumpe 5,5 kW - Hydraulikölmenge 80 Liter - Spannung 400 V/ 50 Hz - Behältergrösse 1040 x 1040 mm - Abmessungen L=2030, B=1270, H=1345 - Gewicht 900 kg

Ryazan Lathe-carousel machine 1L532F3 (1M557F3) Lathe-carousel machine 1L532F3 (1M557F3) after overhaul

We offer this machine as non-functional. You can prepare this machine yourself or purchase it as a decorative item Condition: untested (used)

Description: Rated power 2.6 / 3.0 KW Rated current 16/8.3 amps Output voltage 2 x 230AC / 1 x 12 V/DC Tank volume 18 l Engine power 6.5 hp Machine weight approx. 45 kg Space requirement approx. 0.68 x 0.58 x 0.54 m Approx. Onsite Dimension. (l x w x h): 700 x 600 x 550 mm, weight approx.: 45 kg

* in pristine condition * Large capacity of 310 liters * Meets ASME and PED requirements * Multiple cycle options for flexibility * Reliable and easy to use * Includes all original accessories This is a brand new Tuttnauer 55120 autoclave that has never been used. It is in pristine condition and is ready to be put to work in your hospital or medical facility. This autoclave has a large capacity of 310 liters, making it ideal for sterilizing large quantities of equipment and supplies. It also meets ASME and PED requirements, so you can be confident that it is safe and effective. The 55120 offers multiple cycle options for flexibility, so you can choose the cycle that is right for your specific needs. It is also very easy to use, with a clear and intuitive control panel. The autoclave includes all original accessories, so you have everything you need to get started right away. Th ...

BAZ ideal for room door production with tool changer Lock box milling unit separate from the side Belt milling or drilling units on the other side incl. tools

Cat. No. 12-1130 in very good condition Measurements and Weight: LxWxH: 160 x 45 x 102 cm Weight: 192 kg Model: HTIRM Type: 55VT-DS NW 50 4,4 kW 100 l/min, 6000 l/h 9 bar DN 65 Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1130 in very good condition Measurements and Weight: LxWxH: 160 x 45 x 102 cm Weight: 192 kg Model: HTIRM Type: 55VT-DS NW 50 4,4 kW 100 l/min, 6000 l/h 9 bar DN 65 Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12