used ALZMETALL ABOMAT

with NC round table WALTER 1000 mm, see pictures

Vertical drilling machine make ALZMETALL type Abomat 40Fabr. -No: 147 A built in 1968Drilling capacity in St / GG: 45/60 mmSpindle mount: MK 5Table size: 500 x 500 mm12 spindle speeds: 35 - 1400 rpm.7 automatic feeds: 0.04 - 0.3 mm / revSpindle head diameter: 62 mmDrilling carriage stroke: 400 mmDischarge: 330 mmMax. Distance table to spindle: 1165 mmMax. Distance base plate to spindle: 1550 mmDrive power: 4 hpDimensions L x W x H: 1350 x 600 x 2250 mmWeight approx. 1200 kgWith- semi-automatic workflow- electr. controlled jump feed- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High performance horizontal boring mill make ALZMETALL type Abomat 30Machine -No: 346, built in 1981revolver drill headNumber of tool holders: 6-foldDrilling capacity: 35 mmDischarge: 330 mmSpindle mount: MK 4Longitudinal table: size 500Adjustment travel: 540 mmRotary tableOperation: manual-hydraulicDiameter: 600 mmfurther techn. Dates:Machining length min / max: 470/1170 mmInsert height of the workpiece: 1223 mmTop height: 235 mmMain motor: 3.2 kWHydraulic motor: 1.5 kWFeed rate: 1.1 kWExternal dimensions: 3000 x 1700 x 2100 mmSpace required incl. Hydraulic and control cabinet approx .: 4000 x 3000 mmWeight approx. 2.5 tonsWith- 6-fold turret GRAS type ARBO 308- Dividing head Fibrotact Y51 400 UN2RA graduation 2; 3; 4; 6; 8; 10; 12; 16; 20; 24; 240smallest partial angle 1.5 °- FIBRO rotary indexing table MY13 800NRA manual-hydraulic, smallest part angle 1 °- Feed FORKARDT F 400- slide ...

Vertical Boring Mill Fabr. ALZMETALL Type ABOMAT 35Machine No: 313 Year 198617155 operating hoursDrilling capacity in steel ST 60: 45 mmDrilling capacity in cast GG 20: 60 mmDrilling capacity steel ST 60: 60 mmThread cutting steel ST 60: M 42Thread cutting Cast GG 20: M 60Long spindle with cross wedge fracture: MK 4Discharge: 330 mmTable mounting surface: 560 x 450 mmBoring stroke: 700 mmRapid traction motor n = 150 min: 1.1 kWFeed motor: 0.25 kW n = 3000 minRapid traverse speed: 4.75 m / minFeed: 0.04 / 0.05 / 0.07 / 0.10 / 0.14Feed size optionally: 0.20 / 0.28 / 0.40 mm / revDrive power: 4.0 kWSpindle speed: 56-2500 rpm.Weight approx .: 1300 kgWith- 6-spindle head ARBO 30No. 139, built in 1989used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 212, built in 1982Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Cooling device type B with separate tank with pump- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle head- Coolant inlet via distributor with inlet to eachxa0xa0 Spindle of the MSK with 1 cock each- Feed unit for drilling carriage movementused, in good conditionPrice on request.Delivery: ex warehouse or location free ...

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 312 Year 1986Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx. 530 kgWith- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Coolant device- electr. controlled free-cutting device- semi-automatic threadingxa0xa0 by means of Leit cartridge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machin ...

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 273, built in 1985Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- Cooling device type B- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle headxa0xa0 with distributor and flexible inlet pipes with stopcock- Feed unit for drilling carriage movement- swiveling operating part- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like  ...

Column drilling machine automatic drilling machine manufacturer Alzmetall Type Abomat 20 Year of construction 1992 Without the pictured cross table Box tour Speeds can be switched via gearbox. Fully functional to see under power

: Alzmetall Abomat 160 tool adaptor: SK50 weight of the machine ca.: 2 t Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

weight: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 65 mm throat: 380 mm Control: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/min table-size: 630 x 500 mm rapid traverse Z-axis: 4,75 m/min boring feeds:: 0,05 - 0,56 mm/U total power requirement: 9 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,50 x 1,20 x 2,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 32 mm Throat: 0 mm Spindle taper: 150   MACH-id    5460 MAKE        Alzmetal TYPE          Alzrapid 32 YOP             1998 SPECIFICATIONS Max. drill Ø steel      32 mm Max. drill Ø cast       40 mm Max. tap Ø      24 M Arm Length    725 mm Stroke pinole        150 mm Throat       400 mm Spindle Taper      4 ISO/Bt/Mk Speeds / ranges        3000 Rpm Table Length        1175 mm Table Width          525 mm Power       3 kW DIMENSIONS Length        2600 mm Width         2000 mm Height    &n ...

Column Drilling Machine make ALZMETALL type AB 35 SMachine -No: 963 Year 1970Drilling capacity in steel 32 mmDrilling capacity in cast 40 mmDrilling capacity in steel 45 mmMorse taper MK 4Discharge 300 mmColumn diameter 145 mmStepless spindle speeds 55 - 1450 rpm.Quill stroke 160 mm3 automatic feeds 0.1; 0.2; 0.3 mm / revTable size 375 x 500 mmDrive power 1.4 / 2.2 kWPower connection 380 V, 50 HzDimensions L x W x H approx . 600 x 800 x 2000 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 16653Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speeds- R + L run- cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 3 EYear of manufacture 1979Technical specifications:Drilling capacity up to: 32 mmSpindle mount: MK 3Infinitely variable spindle speeds: 65 - 1150 rpm.3 automatic feeds: 0.1 / 0.2 / 0.3 mm / rev.Throat: 280 mmColumn diameter: 150 mmTable size: 350 x 350 mmSpindle stroke: 150 mmDrive power: 2.2 kWPower connection: 380 V / 50 Hzwith- swiveling table- drill chucksused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 81978Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Polumshiftb. Engine 2.2 / 3.4 hp engine speed 750 / 1500 rpm spindle rotation. I 40 - 120 120 - 360 rpm II 80 - 240 240 - 720 rpm Short spindle MK 4 spindle stroke 170 mm Extension 345 mm clamping area 720 x 560 mm feed 0.09 / 0.16 / 0.28 mm column diameter 160 mm

Motor can be switched 1.0 / 1.6 kW motor full protection against therm. Overload engine speed 700 / 1400 rpm spindle rotation. I 65 - 240 / 240 - 875 rpm II 130 - 480 / 480 - 1750 rpm short spindle MK 3 spindle stroke 160 mm extension 300 mm combination drilling table with insertion vice, jaw width 125 mm, Wingspan 130 mm with round table 450 mm feed 0.1 / 0.2 / 0.3 mm column diameter 145 mm thread cutting device with foot switch coolant device A consisting of: - coolant base plate with machined work piece support surface 320 x 320 mm 2 clamping grooves, pump / motor chu tzswitch Art.-No. 103-069

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine