used AL KO Power Unit

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

1 steam turbine for power generation from a wood chip steam production plant Manufacturer: Kuhnle,Kopp+Rausch Manufacturing No. 4-339 002 Type: HFA 30B Power 263 kW Year of construction 2006 Speed 18036 Live steam: 19.8 to 27 bar Exhaust steam 1.5 to 4.5 bar Quick shutdown: 203.8m-1 The system was dismantled by us in 2018 and put into stock. 1 steam turbine for electric power generation of a wood chip steam production plant Manufacturer: Kuhnle, Kopp+Rausch Manufacturing No. 4-339 002 Type: HFA 30B Power 263kW Year of construction 2006 RPM 18036 Live steam: 19.8 to 27 bar Exhaust steam 1.5 to 4.5 bar Rapid shutdown: 203.8 m-1 The system was dismantled by us in 2018 and placed in stock.

Dividing head make SCHMIDT - KOSTA type AT / 2 AFabr. -No: 11 / 12.79 built in 1979Table diameter: 315 mmPitch: 15 °With- Three-jaw chuck RÖHM 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 6260 Type: RZ-01 Producer: KOMFI Generated: 2001 Parameters: Equipment: Lower Replacement Pressure Roller Replaceable chrome screen cylinder (small worm pattern) Paper anilox roller (pattern coarse canvas)

weight: 13.500 kg x-axis: 1300 mm y-axis: 700 mm z-axis: 700 mm : von 1500 bis 10000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kometos thawing unit, model: FC-MTC-15, year of production: 2021, inside dimensions: 7500 mm x 2580 mm x 2000 mm, total dimensions: 9000 mm x 2800 mm x 3250 mm.

Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Kohler Engine: KDW1003 Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: LINZ Generator type: Alumen Generator power: 8 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.9 Speed: 1500 rpm Switchgear: Execution: Key Startup Functions: Hand start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 66 Dimensions of the power unit: Width approx. mm: 1.400 Height approx. mm: 2.500 Length approx. mm: 2.400 Weight approx. KG: 824 Condition: Demonstration machine Year of construction: 2020  ...

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

<br>UP: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOLIE: 30-100 MIKRON<br><br>Still in operation: No<br>Verf Gbar: immediately

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

We can offer you all types of Wafios nail machines from S25 - N90

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Lathe Vertical Type double column KOLOMNA model 1580 L Year of manufacture 1978 Very good condition, Machine dismantled New electrics can be put as for the customer request Location: Rudniki, Poland, Technical details : Max workpiece diameter : 8000 mm Max workpiece high : 3200 mm Max workpiece weight : 125 000 kg Facing chuck diameter : 7100 mm Max ram stroke : 2000 mm Max carriages travel : 4275 mm Table speeds range : 0,22-20,1 rpm Carriages feed range : 0,0352-285 mm/min Carriages rapid feed : 2500 mm/min Transversal beam feed : 300 mm/min Dimensions : 8615x17600x9800 mm Machine weight with electrical unit : 258 000 kg Machine weight without electrical unit : 247 300 kg

We can offer you all types of Wafios nail machines from S25 - N90

with 3-jaw lining Röhm - 200 mm - 15 pitch

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

We offer all types of Wafios wire pin presses from S25 - N90

Kodak Digimaster EX110 Digital Production System (B/W) - used, from 2009 Base configuration Print engine with three paper drawers Operator control interface with flat panel monitor display System control subsystem Finisher SP or AP Print Production Software 8.0 ____ Print engine Print rate speed: 110 ipm (A4) and 92, 73, 55 ipm (A3) for wider formats Resolution: 600 dpi LED imaging technology Volume: up to 3.6 million impressions per month ____ Paper sizes Top drawers: In-track (standard): In-track (with extended paper size option*): Cross-track (standard): Cross-track (with extended paper size option*): Middle and lower drawers: In-track (standard): In-track (with extended paper size option*): Cross-track (standard): Cross-track (with extended paper size option*): 203 - 229 mm (8 - 9 in.) 178 - 229 mm (7 - 9 in.) 250 - 356 mm (9.84 - 14 in.) 210 - 364 mm ...

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Complete boiler system Kohlbach Year of construction - 1990 Power - 4000 kW For very wet chips incl. bark Water content - about 15000 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulically ash removal Cyclone for dust separation Electrostatic precipitator Complete controling system Well maintained, excellent condition

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

combination separator with flying saw manufacturer: Kontra Anlagentechnik year: 2005 saw blade: Ø 250 mm length: 2850 mm width: 1100 mm height: 1900 mm

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l